GENERAL

Engaging of JCB on Hire Basis including driver wages & Helper wages including fuel Charges and all type of charges etc., complete

Augoring and boring of holes in site for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,augerbore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.

Under - reaming for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,auger bore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.(BULBS)

Supply and placing of the VRCC M-20 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all materials , operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

For Plinth Beams

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415/ Fe 500 grade as per IS 1786 ) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126).

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 1 Coats (All Colours)(Total 2 Coats)

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.

Filling of Gravel for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Drilling of Bore well with Hand Bore set to a finished dia of 112/165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges.

Supply and Delivery of 160mm Dia O.D.PVC Pipe (6 Kgf) duly slotted to full for casing including cost of couplng etc

Supply and Delivery of 160mm Dia O.D.PVC Pipe (6 Kgf) for casing including cost of coupling etc

Manufacture Supply and Delivery of ISI marked fully hot dipped Galvanized deep well IM-II (India Mark) hand pump assembly completed unit with 10Nos of connecteing rods (bright bars of 12MMdia 3Mts lengtheach conforming to IS :9301/1990 with its ammendments revisions upto date including Bis packing)

Supply & Fixing of 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Construction of bore well platform of 1.85 m dia and 3.00 m length drain and foot rest of 1.00 x LOU m with CC (1:2:4) using 20 mm H8G metal including cost and conveyance of all materials labour charges, centering, curing, seigniorage charges & excluding taxes etc., complete as per UNICEF type design.

Labour charges for erection of IM-II Hand Pump Assembly with all its accessories and with the required number of 32mm dia CI-13 GI pipes including all taxes and as per the directions of the department officers but excluding taxes.

Point Selction Charges for Bore Well to Geologist Report etc.,

Supply, Transportation and Fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply Input voltage 120-270 V AC, P.F>0.90, high power LED's having system efficacy>100 lm/W and junction temprature<70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution, THD< 10% at 110 Volts AC, driver efficiency >90%, CCT:3000K-5700K, minimum CRI>70, etc., complete including fixing of luminaire on wall/Pole with 1.0 mt of 40mm dia GI pipe bracket and anti-tilting MS flat, 3 core 1.5 Sq.mm sheathed flexible round copper cable including all labour charges and giving connections etc., complete. a) Luminaire make: Wipro(Skyline)/Philips (Green line) / GE-Venture / Crompton(Nexus star) / Bajaj (Edge) / Havells (Endura Pearl) b) LED make:Philips Lumileds/ Cree/Nichia/ Osram/Samsung/LG LEDs

Fixing of MV / SV / MH / LED luminaire on wall with 1.0mt 40mm dia GI pipe bracket and anti-tilting MS flat, 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.

Supply and fixing of 4 run of 6 Sq mm ( 7/16,phases 3, neutral) with WPSC (Weather Proof Single Core) ISI Alluminium Wire coil

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item