Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC PREM SAROVAR HOTEL NAINITAL 263 001 UTTARAKHAND | NAINITAL | UTTARAKHAND | 263001 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹16.8 L+₹54,644.02 (3.35%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹17.0 L+₹67,409.92 (4.14%)Rejected-Finance 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | L3 | Rejected-Finance Not being L1 |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
27 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF Bareilly
HQ CWE AF Bareilly Pin code 243002
PROVISION OF MES COMPLAINT CELL AT AF STN BHOWALI
2023_MES_615501_1
81373/E8
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Bhowali
PROVISION OF MES COMPLAINT CELL AT AF STN BHOWALI
9 documents required · 9 mandatory
₹500
AGE(I) BHOWALI
₹38,000
Yes
31 Oct 2023
24 Aug 2023
30 Sept 2023
24 Aug 2023
27 Sept 2023
8 Sept 2023
25 Aug 2023 - 30 Aug 2023
Amount
Surface excavation not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified. complete all as specified.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock complete all as specified and directed.
Removing excavated materials (rock) exc 250m but n.exc 500 m and depositing where directed complete all as specified and directed.
Removing excavated soft/loose soil exc 250 m but n.exc 500m and depositing where directed complete all as specified and directed.
M&L for excavation over area n.exc 1.50m deep and getting out in soft/disintegrated rock complete all as specified and as directed.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
All as per item No. 09 above but depth exceeding 1.50 metre and not exceeding 3.0 metre.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
Treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge n exc 63mm , deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L for Plain Cement concrete 1:4:8 (type D2) (40mm graded aggregrade) in foundations, filling and mass concrete complete all as specified and directed.
Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm depth in any type of soil complete all as specified and directed.
Removing excavated material (soil) n.exc 50m and depositing where directed at a level n exc 1.50m above the starting point complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Rough finished flat complete all as specified and directed.
M&L for Formwork to rough finished square, rectangular surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as landings and similar work; not exceeding 200mm thick rough finished surface of flat concrete (Horizontal or sloping) complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, Landing beams etc. rough finished flat concrete surfaces complete all as specified and directed.
M&L for Formwork to edges of concrete flats, treads, breaks in floors and roofs n exc 20cm wide and similar work etc complete all as specified and directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items incl edges complete all as specified rough finished flat surfaces of complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 06 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L RCC M-25 (Design Mix) in foundations, filling and mass concrete , Plinth beam and finished surface concrete flat complete all as specified and directed.
M&L RCC M-25 (Design Mix) in Columns, pillars, piers, posts and struts and finished conctrete surface flat complete all as specified and directed.
M&L for RCC M-25 (Design Mix) as in slab supported on walls, beams and column in floors, roofs, landings, balconies shelves etc and finished conctrete surface flat complete all as specified and directed.
M&L for cement concrete M-25 (Design Mix) in roof beams ,floor beam etc and finished conctrete surface flat complete all as specified and directed.
M&L for RCC M-25 (Design Mix) in Chajjas and finished conctrete surface flat complete all as specified and directed.
M&L for precast cement concrete in type C1 1:3:6 using 20mm graded stone aggregate for cover slab, landings, chullah hoods, chajjas, water troughs managers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed
M&L for earth under floors with soil including watering and well ramming in layers n.exc 25 cm thick.
M&L for stone walling of random rubble stone masonary, uncoursed, well bounded, bedded & solidely hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed.
M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified and as directed.
M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete as specified and as directed.
Brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L for 40mm thick PCC cement concrete ,1 :2:4 with 12.5mm graded aggregate mixed with WPC as per manufacturers instruction as in DPC work complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on brick/concretes fair surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on external sufaces on other than fair faces of brick work or concrete surfaces mixed with @2% WPC by weight of cement. (WPC paid seperately) and finished the surface even and fair complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 as in ceilings and finished the surface even and smooth without using extra cement complete all as specified
Supply only intergal water proofing compound, complete all as specified.
M&L for preparation of new wall plaster surfaces and applying three coats of white wash complete all as specified.
M&L preparation of newly plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation on newly plaster surface of ceilling and applying Three coats of white wash complete all as specified and directed.
M&L for 15mm thick cement plaster (1:3) with using WPC as in screed bed of roof slab (WPC shall be measured seperately) complete all as specified.
Applying one coat of hot blown bituminous primer @0.40 kg per sqm on plastered surfaces complete as directed
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified.
M&L for APP based polymeric membrane, 3mm thick(min), weighing 3.5 kg/sqm reinforced with polyster non wooven fabric matt weighing not less than 160 gms/sqm) laid on primed surface complete all as specified.
M & L for 40mm thick brick tiles bedded in CM 1:6 and joints grouted flush in Cement mortar (1:3) mixed with 5% of cruide oil by weight of cement tiles are bedded in Cement mortar (1:6), 15mm thick complete ,all as specified.
M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base and finished rough and fair complete all as specified.
M&L for Coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.
Ditto all as per item No.52 here in before but as in skirting/dado including 10mm thick backing coat in CM (1:3) complete all as specified
S&F Glazed ceramic tiles coloured in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screedbed in CM 1:4 complete all as specified and directed.
M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified.
M&L for forming construction(Dummy) joint 65mm deep x 10mm wide, and filled with sealing compound grade 'A' complete all as specified.
S&F steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified.
S&F galvanised mild steel wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18mm complete all as specified.
S&F Pressed steel frames (Size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified.
M&L for cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, fixing of holdfast, plinth courses , string courses, lacing courses parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, filling inside the frame, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as spectified and directed.
M&L for 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
Supply and fixing of 35 mm thick factory made 2nd class hardwood, wire gauze door shutters without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire gauge complete all as specified.
M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Supply and fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised of size 100 mm.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S & F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing of solid PVC door frame of size 50 mm x 47 mm made ouit of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.
M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site complete all as specified.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing etc and making good, cuting n exc 10cm girth in brick walls complete all as specified.
Supply and fixing 15mm bore dia Galvanised steel tubes medium grade with all necessary fittings fixed complete to walls, ceilings or laid in floors etc. complete all as specified and directed.
Supply and fixing 20mm bore dia Galvanised steel tubes medium grade with all necessary fittings fixed complete to walls, ceilings or laid in floors etc. complete all as specified and directed.
Supply and fixing 20mm bore dia Galvanised steel tubes medium grade with all necessary fittings laid in trenches, complete all as specified and directed.
M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia complete all as specified and directed.
Supply and fixing 20mm dia Stop valve cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed Complete all as specified.
Supply and fixing 15mm dia Bib tap cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed Complete all as specified (Weight not less than 400gm).
Supply and fixing 15mm dia Stop/Angle cock cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed Complete all as specified
Supply and fixing PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern comp all as specified.
Supply and fixing PVC connection 15 mm size with PTMT nuts of length 600 mm
Supply and fixing helth faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making commections and fixed in position completed all as specified and directed.
Supply and fixing 15 mm bore dia pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed sown hign pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed (Weight not less than 400gm).
M&L for 32mm dia waste fittings, brass, chromium plated for glaxed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply and fixing grating round 140mm size of PTMT (minimum weight 50 gms) complete all as specified and directed.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified
Supply and fixing vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with 'P' or 'S' trap, and integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime/ cement concrete bedding complete all as specified and directed.
S&F Vitreos China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fixing vitreous china wash hand basin,white,flat back of size 550X400 mm excluding taps, waste chain and plug porcelain stoppers but incl brackets,cutting for and pinning in ends of bracets or erecting stand complete all as specified and directed.
S&F low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqm cm laid in trenches of 32 mm dia complete all as specified and directed.
S&F Aluminium anodised tubular towel rail, 20mm dia,D type, 60cm long between flanges complete all as specified and directed.
Supply and fixing of 75 mm CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) all as specified and directed.
M&L for 150mm internal dia sail-glazed stoneware drain pipes laid in trenched and jointed complete all as specified and directed
M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipes
S&F 110mm bore PVC(SWR) pipes single socketed, in any length with rubber ring jounts, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring jounts, laid in trenches or in floors complete all as specified and directed.
M&L Precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate)as in manhole cover set in CM (1:4) including necessary form work complete all as specified and as directed.
M&L 150mm dia Reinforced concrete pipes, Class NP-2 laid in trenches and jointed with collars complete all as specified & as directed.
M&L Concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested with cement concrete ( 1:3:6) type D-2 complete all as specified & as directed.
M&L for providing pre-cast PCC bond stone (for stone walling), type B1 1:2:4 (20mm graded stone aggregate) set in CM 1:6 complete all as specified and directed.
M&L for raised pointing to RR, uncoarsed or brought upto course stone masonary in CM 1:4 complete all as specifed and directed
Extra over stone masonary for hammer dressing to face stone & face beds, joint with maxi depression on face from strainght, edge held against the dressed surface n exc 40mm thick for granite or trap basalt stone complete all as specified and directed.
M&L for hand packing (any thickness) broken stone at back of wall and raising (or lowering) to the required level except bounder/stone complete all as specified and directed
M&L for High density polythylene pipes (HDPE) 75mm bore as weep hole of pressure rating 6Kg/Cm Square laid in retaining wall complete all as specified and directed
Demolition of Brickwork stone/boulders masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed
Demolition of concrete in Ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for Septic tank of capacity of 10 users including excavation in any ordinary soil, foundation using PCC 1;2;4 type B-1 ( using 20mm graded stone aggregate), brick work in CM 1:4 , internal plater 15mm thick in CM 1:4 with WPC , RCC slab including Precast RCC manhole cover having 6mm plate embedded all around with angle iron vent shaft and sludge chambers etc complete all as specified and shown on TD Drawing No. 217 sheet No 1/2 & 2/2.
M&L for soakage wells excavation in any type of soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concerete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/ SFRC cover interconnection pipes of RCC/DWC complete filled with brick bats of size 1.8 m dia x 3.00 m effective depth complete all as specified and shwon on as per TD - 576 sheet 1/2 & 2/2 of CE Lucknow Zone as directed
M&L for point wiring complete with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface for existing pipe) and supply and fixing concealed PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: - i) One light point or one fan point controlled by one way, single pole switch .
(ii) One 3 pin socket outlet, 6 Amp on “independent board” but below the switch board of the light point in same vertical plane.
(iii) One 3 pin socket out let, 6 amps on the "same board" with other switches
(iv) One 3 pin socket outlet, 6 Amp on “independent board”
All as per item No. 2 here in above but point wiring using 2.5 Sqmm (Nominal area) FR PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 25 sqmm with one single run copper wire as continuous earth wire to common earth dolly complete.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Cat part of Philips: BN108C LED 40S PSU CDL WH or equivalent of Crompton, Havells
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make: Cat part of Philips: BRP409 LED CW 036 MR FG S1 PSU GR or equivalent of Crompton, Havells
Supply & Fixing Modular switch 1 way 6A,1 module, 240 Volt, single pole , ISI marked conforming to IS 3854 style single colour series with complete all as specified and directed.
Supply & Fixing Socket, 6A - 2/3 pin combined 2 module, 240 Volt AC, flush type, style single colour series with complete all as specified and directed.
Supply & Fixing Switch socket Combination 16A, 6 pin, 3 module, 240 Volt AC, style with single colour series"complete all as specified and directed.
Supply & Fixing FASHION ceiling rose with colour ring.
Supply and fixing of White cover plate with frame, 1 module as specified and directed .
Supply and fixing of White cover plate with frame, 3 module as specified and directed.
Supply and fixing of White cover plate with frame, 6 module as specified and directed .
Supply only SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning as specified and directed.
Supply only MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.
XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm 4 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after fixing and laying complete all as specified.
M&L for sub class 'B' bricks old size, as cable mechanical protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.
Sand cushioning to under ground cables, 8 cm thick layer before laying and testing the cable and 15 cm thick after laying and testing of the cable in trenches complete all as specified in Clause 19.75 of MES SSR 2009 Part-I and directed by Engr-in-Charge.
M&L for mild steel galvanised light grade 25mm dia tubing with all fitting; laid in trenches, across road or on pole complete all as specified.
Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground preferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completion complete all as specified and as directed.
M/S HIMALAYA ENTERPRISES
Jain construction co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .