POST CONSTRUCTION ANTI TERMITE TREATMENT

Amount

Supplying Chemical Emulsion in sealed containers including delivery as specified (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%)

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti termite treatment (excluding the cost of chemical emulsion) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm apart including 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 liters per hole by drilling 6 mm dia holes at downward angle 45 degree at 150 mm centre to centre and sealing the same.

Removing and relaying of existing carpet laid on floors as per direction of Engineering-in-charge

Providing and fixing of polyprolene carpet of 6 mm thick area in replace of damage during removing as per Engineer-in-charge

Supply and installation of Anutone/Ecophon/Amstrong stretch NRC wall fabric syatem by using FR grade NRC fabric size of 1700 mm width shall be stretched by using wooden base 10 mm thick, rigid vinyl stretch track half wrap/full wrap 15 mm (FS15) strand board, synth PF in fill with requisite accessoried & tool. GI section of size 50x 50 mm strut system, strand square edge magensite bonded pinewood fiber panels of size 600 x 1200 x 30 mm having density 400 kg/cum. Weight 4 kg which is fixed to aluminum channels with suitable fasteners. Sync 5 x50 mm thick adhered on the wall with chicken mesh wooden base 10 mm is fixed to the strand panel with metal screws . FS15 tracks to be installed on wooden absea, after applying stick and adhesive on both surfaces for a true and continuoius secure grip abd heavy duty fasteners at 150 mm centers on one side of stretch tracks.Fabric of width 1700 mm is then aligned to the stretch tracks by the following the fabric thread line or pattern. The fabric is stretched and tucked into the stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools.Additional 5 x 50 mm synth is fixed between the panel and the fabric.

Removing and reinstallation of Auntone/Ecophon/Armstrong stretch NRC wall fabric system as per direction of Engineer-in-charge