Construction of balance work of conservation revival and site development of Asthana yokma Kharboo Kargil

Earth work in excavation by mechanical means (Hydraulic excavator)in trench and drain (exceeding 30cm in depth,1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m. All kinds of soil 80%

Ordinary rock @ 15%

Hard rock (Blasting Prohibited) @5%

Providing and laying of soling stone under the mud mate. Including all carriage complete.

Providing and laying cement conc. Work of M 7.5 plain grade nominal mix conc. Work. Max. size of nallah stone agg. 20mm thick incld. Curring complete.

Providing and laying cement conc. Work of M10 plum grade nominal mix conc. Work(1:3:6) with 20% boulder in mass volume. Max. size of crushed stone agg. 20mm thick incld. Curring complete.

Centring/ shutering incld. Strutting, propping etc. with removal of form work. (a) wall any thickness.

(b) Pillars/column/piers/abutment etc.

© Suspended floor,roof, Landing etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m.

Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level: Hot rolled deformed bars

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with: Local willow wood

Providing and fixing of local talbo design over the tokuru fakchay incld. All necessary fittings/required complete.

Providing hoisting and fixing trusses/purlins/ rafters/posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDMseal, complete upto any pitch in horizontal/ vertical or curved surfaces, excludingthe cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing of eves boarding of ist class budloo wood. Incld all necessary screw complete.

Providing and fixing of weather boarding of ist class budloo wood. Incld all necessary screw complete.

15mm cement plaster in 1:3 mix. Cement mortar with a floating coat of neat incld. Cement slurry. Incld. Curring complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer

Franch sprit polish with two or more coats on new work incld a coat of wood fillers.

Providing /Filling of wooden sawdust over the slab in the centre of tokuru fakchay incld. All necessary material complete.

Providing and fixing of M.S grill gate fency type size (12'-0"x6'-0") with all necessary fitting/ screw complete incld. Priming/ painting complete job.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge including door stoper,locker,tightinig screws and all other related items complete job with carriage.

Providing and laying M/S wire mesh shape over the roof along proper fixing materal screws etc

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively,second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitufnen felt) six and final courses of stone grit 6mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading compete.

Supplying and laying Bitumen based roofing gum of lead stop compound bonding adhesive to the tar felt of and membrane sheet complete job.

P/L thermocal on the floor of Astana inclduidng carrige complete.

P/F wall to wall of superior quality including carige complete upto site

Providing and laying of green grass turfing over the prepared surface of ground. Incld. Watering and mantannce of lawn for 3 moths till the grass form a thick lawn incld. carriage from Minamarg to Yokma kharboo

Providing and fixing of PVC prience pipe type B of diff size incld. Fitting as per req complete inclduign carrige. 75mm dia

Supplying and stacking of good earth at site incld Rolyaty and carrige upto 1km.

Supplying and stacking of good earth at site incld Rolyaty and carrige upto 1km.

Carriage of sand/Agg. lead upto25 kM by MT

Carriage of cement lead upto 65 kM by MT