PROVN OF TRG SHED 36M X 12M NEAR BAKSHI GROUND IN JAT REGT CENTRE

Amount

Excavating in post holes in hard surface (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface.

M& L for PCC1:3:6 type C2 (40mm aggregate) as in foundation, filling and mass concrete.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

Taking down cement plaster from wall / ceiling of any description including terrazzo skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement all as spd and directed

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M&L 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate in floor finishes even and fair to receive floor tiles.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for 18-20 mm thick machine cut kota stone flooring in patches and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes all as specifiedor even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L machine cut Kota stone slab 18 to 20mm thick in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as spd and directed

M&L for Marble works 16 to 18mm thick Green marble machine cut and machine polished,and moulding, one side green marble, over/jambs of doors/ window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble

M& L for 30X30cm providing precast cement concrete rubber moulded chequered coloured tiles 25 mm thick even finished on top of approved design and pattern complete all as specified and directed screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 for laying floor finishes all as specified and directed.

S&F steel work in tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F steel work in frame work as in gusset plate , crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M& for prepainted galvantunm aluminium zinc coating GI based corrugated sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw as specified

M& L for Preparation of iron surface and two coat of synthetic enamel paint ovar a coat of red oxide

Demolition as of bldg No CB-56 SA office of JLA Bareilly upto floor level complete incl removal of debris to a distance exc 50 but not exc 100 mtr

Notes :-

TRISHOOL ASSOCIATE

M/S Harshri Nath Enterprises

M/S SUBHASH CHANDER AGARWAL

REHAN CONSTRUCTION

multiple alliance enterprises

Chandra Construction