Repairing of motor and pumps for water supply

All Capacity Turbine Motor Pump Taking OutfromBore at Site.

All Capacity Turbine Motor Pump Lowering in Boar With Material at Site.

Turbine Motor 125HP Rewinding With Material etc.

Turbine Motor 125HP Repairing/overhauling

Turbine Motor 125 HP Replacement of Driving End Bearing

Turbine Motor 125 HP Replacement of Non-Driving End Bearing

Turbine Motor 125HP Rotor Repairing with Dynamic Balancing

Turbine Motor 125HP Opening Fitting, Lath Work & Testing Charge etc.

Turbine Pump 125HP Spider Bush GM / Rubber

Turbine Pump 125HP Line Shaft Bush SS Grade 304

Turbine Pump 125HP Line Shaft SS Grade 304

Turbine Pump 125HP Bowl Bush GM

Turbine Pump 125HP Neck Ring GM

Turbine Pump 125HP Pump Shaft

Turbine Pump 125HP Impeller Repairing with Dynamic Balancing

Turbine Pump 125 HP Fitting nut bold with Washer

Turbine Pump 125HP Opening Fitting, Lath Work & Testing Charge etc.

Turbine Motor 75HP Rewinding With Material etc.

Turbine Motor 75HP Repairing/overhauling

Turbine Motor 75 HP Replacement of Driving End Bearing

Turbine Motor 75 HP Replacement of Non-Driving End Bearing

Turbine Motor 75HP Rotor Repairing with Dynamic Balancing

Turbine Motor 75HP Opening Fitting, Lath Work & Testing Charge etc.

Turbine Pump 75HP Spider Bush GM / Rubber

Turbine Pump 75HP Line Shaft Bush SS Grade 304

Turbine Pump 75HP Line Shaft SS Grade 304

Turbine Pump 75HP Bowl Bush GM

Turbine Pump 75HP Neck Ring GM

Turbine Pump 75HP Pump Shaft

Turbine Pump 75HP Impeller Repairing with Dynamic Balancing

Turbine Pump 75 HP Fitting nut bold with Washer

Turbine Pump 75HP Opening Fitting, Lath Work & Testing Charge etc.

Turbine Motor 60HP Rewinding With Material etc.

Turbine Motor 60HP Repairing/overhauling

Turbine Motor 60 HP Replacement of Driving End Bearing

Turbine Motor 60 HP Replacement of Non-Driving End Bearing

Turbine Motor 60HP Rotor Repairing with Dynamic Balancing

Turbine Motor 60HP Opening Fitting, Lath Work & Testing Charge etc.

Turbine Pump 60HP Spider Bush GM / Rubber

Turbine Pump 60HP Line Shaft Bush SS Grade 304

Turbine Pump 60HP Line Shaft SS Grade 304

Turbine Pump 60HP Bowl Bush GM

Turbine Pump 60HP Neck Ring GM

Turbine Pump 60HP Pump Shaft

Turbine Pump 60HP Impeller Repairing with Dynamic Balancing

Turbine Pump 60 HP Fitting nut bold with Washer

Turbine Pump 60HP Opening Fitting, Lath Work & Testing Charge etc.

CENTRIFUGAL Pump Motor 150HP Rewinding With Material.

Centrifugal Pump 150HP Repairing/ overhauling

CENTRIFUGAL PUMP 150HP Replacement of Non Driving End Bearing

CENTRIFUGAL PUMP 150HP Replacement of Driving End Bearing

CENTRIFUGAL PUMP 150HP Replacement / Repair of Impeller

CENTRIFUGAL PUMP 150HP Replacement of Rotor Shaft

CENTRIFUGAL PUMP 150HP Replacement of Pump Shaft Bush, gland, Seal & Hardware

CENTRIFUGAL PUMP 150HP Rotor Repairing with Dynamic Balancing

CENTRIFUGAL PUMP 150HP Opening Fitting, Lath Work & Testing Charge etc.

CENTRIFUGAL PUMP Motor 60HP Rewinding WithMaterial.

Centrifugal Pump 60HP Repairing/ overhauling

CENTRIFUGAL PUMP 60 HP Replacement of Non Driving End Bearing

CENTRIFUGAL PUMP 60HP Replacement of Driving End Bearing

CENTRIFUGAL PUMP 60HPReplacement / Repair of Impeller

CENTRIFUGAL PUMP 60HPReplacement of Rotor Shaft

CENTRIFUGAL PUMP 60HPReplacement of Pump Shaft Bush, gland, Seal & Hardware

CENTRIFUGAL PUMP 60HPRotor Repairing with Dynamic Balancing

CENTRIFUGAL PUMP 60HPOpening Fitting, Lath Work & Testing Charge etc.

Mono-block Motor Pump 20HP Rewinding With Material.

Mono-block Pump 20HP Repairing/overhauling.

Mono-block 20 HP Replacement of Non Driving End Bearing

Mono-block 20HP Replacement of Driving End Bearing

Mono-block 20HPReplacement / Repair of Impeller

Mono-block 20HPReplacement of Rotor Shaft

Mono-block 20HP Replacement of Pump Shaft Bush, gland, Seal & Hardware

Mono-block 20HP Rotor Repairing with Dynamic Balancing

Mono-block 20HP Opening Fitting , Lath Work & Testing Charge etc.

Mono-block Motor Pump 10HP Rewinding WithMaterial.

Mono-block Pump 10HP Repairing/overhauling.

Mono-block 10 HP Replacement of Non Driving End Bearing

Mono-block 10 HP Replacement of Driving End Bearing

Mono-block 10 HP Replacement / Repair of Impeller

Mono-block 10HP Replacement of Rotor Shaft

Mono-block 10HP Replacement of Pump Shaft Bush, gland, Seal & Hardware

Mono-block 10HP Rotor Repairing with Dynamic Balancing

Mono-block 10HP Opening Fitting , Lath Work & Testing Charge etc.

Mono-block Motor Pump 7HP Rewinding WithMaterial.

Mono-block Pump 7HP Repairing/overhauling.

Mono-block 7 HP Replacement of Non Driving End Bearing

Mono-block 7HP Replacement of Driving End Bearing

Mono-block 7HPReplacement / Repair of Impeller

Mono-block 7HP Replacement of Rotor Shaft

Mono-block 7HP Replacement of Pump Shaft Bush, gland, Seal & Hardware

Mono-block 7HP Rotor Repairing with Dynamic Balancing

Mono-block 7HP Opening Fitting, Lath Work & Testing Charge etc.

10 HP Submersible Motor Pump rewinding with material

10 HP Submersible Pump repairing/overhauling.

7 .5 HP Submersible Motor Pump rewinding with material

7.5 HP Submersible Pump repairing/overhauling.

5 HP Submersible Motor Pump rewinding with material

5 HP Submersible Pump repairing/overhauling .

3 HP Submersible Motor Pump rewinding with material

3 HP Submersible Pump repairing/overhauling.

1 HP Submersible Motor Pump rewinding with material

1 HP Submersible Pump repairing/overhauling

Scrap materials (metal iron)