Punnara Ambalam Road Renovation-Project no201/24,Ward-3( Retender)

Amount

Retarring

OD33124/2023-2024:od4_856681/2021_2022: :Filling up pot holes (cut and formed to regular shapes and all loose and defective<br>materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and<br>compacting with power roller to get a compact surface.

3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

3.5.2:Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

75.5.2.2pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD288361/2023-2024:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 using Shredded Plastic Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates coated with shredded plastic (3% by weight of bitumen) as per standard procedure using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means:- Type A (II) Bitumen (S-65) Header Details Unit = sqm Taking output = 500 sqm

OD188103/2023-2024:Granular Sub-base/base/surface course with local materials(Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material, spreading in uniform layers manually mixing by mix in place method and compacting with rammers to achieve the desired density, complete as per Clause 401.4 as per Technical Specification Clause 408

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD316027/2023-2024:Supplying and providing ready made GI name board with all conveyance, labour and hire charges etc complete using GI hollow tube of size 80x40x1.4 mm post, 40x20x1.4 mm outer frame, 0.6 mm thick iron sheet of size 90x60 cm with two coat of enamel painting over a coat of primer, lettering with suitable colour and size, fixing the post in ground with CC 1:2:4 etc complete

Bidder Name

AMEERALI P