PROVN OF TILING IN CERTAIN BLDGS OF INF BN AND CERTAIN MINOR WORK AT SUNDERBANI UNDER GE NORTH AKHNOOR

Amount

Taking down shutter any description exc 1 sqm and n.exc 2.0 sqm each complete all as specified and dircted.

Refixing the shutters area exceeding 1 sqm and not exceeding 2.00 sqm each in the same opening complete all as specified

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated and fitted to chowkats all as specified and directed.

Mild steel pressed handle 150mm long oval typestove enameled black complete all as specified and as directed.

Mild steel barrel tower bolts stove enameled black with bright both 150mm long complete all as specified.

Mild steel sliding door bolt 300mm long plate type stove enamel black with bright bolt n.less than 12mm dia with and including minimum 6 bolts and nuts four on staple plate complete all as specified and directed.

300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel and fixed to steel door frame, complete all as specified & directed.

Floor door stopper 150mm length of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as spd.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

Painting to old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint incld complete removal over a coat of pink primer complete all as specified.

Preparing old painted steel surfaces over 10 cm width of girth and applying one coat (finishing coat) of synthetic enamel paint all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) , complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

Light shade vitrified tiles 10mm thick (Square/rectangular) polished area of each tile nexc 36 sqm, grade B-IIa in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles complete all as specified.

Ditto all as per Srl Item No. 14 here in before but in dado/skirting

Rendering 10mm thick on fair faces of brick/concrete surfaces or in CM 1:4 to receive the wall tiles in dado/skirting complete all as specified.

15mm thick cement screed bedding layer of cement mortar in CM 1:4 for laying of floor finishes complete all as specified.

25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor complete all as specified.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.

Rendering 15mm thick on other than fair faces of brick/concrete or stone masonary surfaces in CM 1:6 finished even & smooth without using extra cement complete all as specifed.

Preparation of new plastered surfaces of wall over 10cm width or girth and applying two coats of oil bound distemper over a coat of primer, complete all as specified & directed.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of oil bound distemper, complete all as specified & directed.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of cement base paint, complete all as specified & directed.

PCC 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished to drain channel not exc 50 cm inner girth in cement concrete using extra cemenmt complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5 deep for foundation etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, all as specified.

Removing excavated soil to a distance n exc 50mm and deposited where directed at a level n exc 1.5 above the starting point

Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing of facebeds and joints as specified of random rubble walling, for lime or sand stone, and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm

PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping complete all as specified.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick , 75cm wide as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).

15mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, including integral water proofing compound complete all as specified & directed.

Glazed ceramic coloured tiles of size 300mmx200mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over complete all as specified & directed.

Non skid ceramic coloured tiles 7 to 8 mm mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

Chequered cement concrete tiles 25cm x 25cm x 25mm thick with white/grey cement and pigment set jointed and pointed in neat cement slurry in floors complete all as specified & directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified & directed.

75mm thick PCC 1:3 :6 type C-2 using 40mm graded crushed stone aggragate as in sub base/path etc all as specified.

60 mm thick inter locking cement concrete mixed colour factory made paver blocks M-35 designation (Compressive strength) laid over 25 mm thick sand cushion to maintain the slope including compaction etc. complete all as specified & directed.

Precast cement concrete 1:2:4 type B-1 using 20mm grated stone aggregates as in kerb stone etc. and in similar work including set in cemount morter 1:4, complete all as specified.

Preparation new decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of cement primer all as specified.

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc all as spd.

Endura coloured (Heavy duty) Chequered cement concrete tiles 300 x 300 x 10mm thick with white/grey cement and pigment set jointed and pointed in neat cement slurry in floors complete all as specified & directed.

PCC 1:4:8, nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed.

Cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in floor chamfered edges complete all as specified.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, complete all as specified & directed.

Glass divding strip 38mm wide 3mm thick laid in floor all as spd.

KANWAL KUMAR GUPTA

ASIA ENTERPRISES

vijay kumar

M/S K K ENTERPRISES