WBPWD/EE/BED/e-NIQ-113/2024-25

Amount

Dismantling of existing damaged/ non functioning accessories mentioned below by own tools and tackels after mending good the building damages and as per direction of EIC.

Supply & fixing of 4ft 18 watt 2100 Lumen o/p, colour temperature 5500 K single LED light fitting with tube Iight on the wall/celling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with "L" type MS clamp whose one side fixed on ceiling with sutable size 4 nos fastener and other side connected with the fitting with suitable size of bolt and nuts incl. S&F EI conduit, "L" type [125mmx125mm) 6mm thick and 25 mm width MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc, by 3x22/0.3 mm (1.5sqmm) 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 1.10 mt length, (Make- Philips, Cat No. TMC 502P 2xT LED 22W P3242,LED Cat No-MAS LED tube 1200mm 18w865 T8 I, similar to Crompton/Wipro- brand approved by EIC.

Supply & fixing of 4' long 28 watt T-5 fluorescent tube light on existing fittings having 5800K- 6000K, luminous efficiency not less than 100 Lm/Watt in place of damaged item incl. all accessories as required as per direction of EIC. (Make: Wipro/Philips- Signify/ Crompton)

Supply & fixing of 4ft 18 watt 2100 Lumen o/p, colour temperature 5500 K twin LED light fitting with tube Iight on the wall/celling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with "L" type MS clamp whose one side fixed on ceiling with sutable size 4 nos fastener and other side connected with the fitting with suitable size of bolt and nuts incl. S&F EI conduit, "L" type [125mmx125mm) 6mm thick and 25 mm width MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc, by 3x22/0.3 mm (1.5sqmm) 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 1.10 mt length, (Make- Philips, Cat No. TMC 502P 2xT LED 22W P3242,LED Cat No-MAS LED tube 1200mm 18w865 T8 I, similar to Crompton/Wipro- brand approved by EIC.

Supply & fixing of 20 watt slimline ultra LED tube light set on surface/ existing fittings having 5800K- 6000K, LED, luminous efficiency not less than 100 Lm/Watt Driver wattage should be greater than or eual to the rated fittings wattage incl. all accessories as required as per direction of EIC. (Make: Wipro/Philips- Signify- Essential LED PL L 4P-865 / Crompton)

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required as per direction of EIC.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.as per direction of EIC.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc as per direction of EIC.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.as per direction of EIC.

Supplying & Fixing of 6 modular GI Modular Switch Board complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works as per direction of EIC.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. as per direction of EIC.

Supply and fixing of 2.5 mfd fan capacitor for existing ceiling fan with own tools as per direction of EIC.

Supply & fixing of 100 watt, IP65 Highbay light fittings(avg. ceiling hight 10Mtr.) having Aluminium die cast body, 6500K, luminious efficiency not less than 130 lm/watt. Driver wattage should be greater than or equal to the rated fittings wattage. incl. all necessary arrangements as required with safty steel chain as per direction of EIC. (Make- wipro LH 21 162 0060 57 XX/ Philips-Signify BY718P LED100/ CW PSU NB/ Crompton LHB 11 100CDL/ 60M) (Entrance area of the building)

Supply and fixing of 250 watt Sodium vapour light on existing fittings with own tools and tackles and as per direction of EIC.(Make- Philips).

Supply & fixing of 18 watt, 1' x 1' surface mounted Square LED downligbter Fitting having 2400 Lm LED, having 5800K- 6000K, luminous efficienry not less than 100 Lumen/watt Driver wattage should be greater than or eual to the rated fittings wattage incl. all accessories as required as per direction of ElC [Make: Wipro/Philips- Signify-Rimless Full glow / Crompton).

Supply & fixing of 18 watt, surface mountedRound LED downligbter Fitting having 2400 Lm LED, having 5800K- 6000K, luminous efficienry not less than 100 Lumen/watt Driver wattage should be greater than or eual to the rated fittings wattage incl. all accessories as required as per direction of ElC (Make: Wipro LD06-221-XXX-57SMG1/Philips- SM251/261 LED20S 6500 PSU WH/ Similar of Crompton)

Supply & delivery of 18 watt LED PL-L light on existing flange type covered PL L light fittings on ceiling having 5800K- 6000K, luminous efficiency not less than 100 Lm/Watt in place of damaged item after removing electronic choke incl. all accessories as required as per direction of EIC. (Make: Wipro/Philips- Signify/ Crompton)

Fixing of 18 watt LED PL-L light on existing flange type covered PL L light fittings on ceiling having 5800K- 6000K, luminous efficiency not less than 100 Lm/Watt in place of damaged item after removing electronic choke incl. all accessories as required as per direction of EIC.

Supply & fixing of 36 watt recess mounted, 2' x 2' LED Fitting having CRCA powder coated ribbed housing 6500K LED, luminous efficiency not less than 100 Lm/Watt Driver wattage should be greater than or eual to the rated fittings wattage incl. all accessories as required as per direction of EIC. (Make: Wipro-CRCO10R030HP57G3/Philips- Signify- RC380B LED42S-6500 G5 L60W50 PSU OD S1/ Crompton- equivalent)

Supply and Fixing only 12" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per direction of EIC.

Supply & Fixing of 12" Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc. as per direction of EIC.

Supply & Fixing of 48" ceiling fan with stranded safety wire complete with blades, canopy, fork, rubber, bush, etc incl. S&F of 1.5 ft down rod [14SWG) with connecting wire for down rod & making necessary connection as required by 3x22/0.3 mm [1.5sqmm) 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) making earthing attachment, painting the down rod and mending good the damages to original finish [Make- Crompton, Cat No:-Aura -1200mm/Orient Newbreeze/Havells of equivalent make]

Supply and fixing of 600 mm sweep heavy duty metal body wall mounted fan with stranded safety wire complete with blades, canopy, fork, rubber, bush, etc on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length as per direction of EIC. [Make- EPC-Tempest/Orient/Havells of equivalent make]

Supply and fixing of 450 mm sweep heavy duty metal body wall mounted fan with stranded safety wire complete with blades, canopy, fork, rubber, bush, etc on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length as per direction of EIC. [Make- EPC-Tempest/Orient/Havells of equivalent make]

Supply and installation of inverted LED 1mtr. Bollard fitting with soft 360 degree light on pcc muffing with fustner nut & bolts including necessary connection arrangement. (make- Philips signify BCP150 LED 150/WW PSU 220-240V 7043/ Crompton Liara LBLSN-10-CDL/ Havells MOUNTBL10WLED857PSYMTOPMMAM)

Supply and delivery of 45 watt LED Street light luminarei IP66, made up of pressure die cast aluminium housing with Toughened glass/PC cover provided with high power LEDs and secondary optics PC/PMMA lens and silicon filled BIS registered potted Vibration proof driver with built in 4KV surge potection and 10 KV external SPD with efficay>= 110 lumen/watt or better, Impact registance IK10/ IK08, CRI>70, CCT>=5700K. (Make-Wipro DOT/ Crompton Rapter Pro/ Bajaj EDGE NXT LED)

Distribution wiring for steel light on pole for outdoor fluorescent/SV/MV light fitting with 2x1/1.40 PVC insulated and sheathed wire (single core) in 15 mm dia GI Pipe (ISI-Medium), without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI Pipe bracket of lengh 1.05 mts, on pole incl. S&F sutable MS flat clamps with bolts, nuts etc. as required and painting.

Supply and erection of single steel tubular pole (MS) of lenth 9 Mtr. With soul plate and cap etc. in CC foundation (proportion and dimension indicated below) having 600x600x150 mm thick CC (4:2:1) base block below sole plate/ pole with hard jhama metal metal including CC (6:3:1) muffing 0.30 mtrs. dia and 0.30 mtrs. above ground level including 3mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carraige of pole upto 1.6KM from store to work place including filling up the excaveted earth pit with shifted soil and ramming properly pole specification 410-SP-28.(Make- Utkarsh/ Bansal/ Zindal)

Supply and fixing of bracket holder for 1 mtr single arm(40NB) with nut and bolts as required for above pole incl. all accessories as required as per direction of EIC.

Extra on items above for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76mt. Above ground level neatly cemented finish (3mm thick ) at the base pole(in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene / polythene pipe entry for street light wiring incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole as per direction of EIC.

Supplying and fixing of 63A 240/415 V FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.

Supplying and fixing of 6-32A 240/415 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.

Supplying and fixing of 40A 240/415 V DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.

Supply and delivery of 4 core 185 sqmm Al Ar. XLPE cable as necy. mending good damages as per direction of EIC. (Make-Gloster/KEI/RR)

Laying of one No. cable of 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed as per direction of EIC.

Supply and delivery of 4 core 95 sqmm Al Ar. XLPE cable as necy. mending good damages as per direction of EIC. (Make-Gloster/KEI/RR)

Supply and Laying of 4 core 95 sqmm Al Ar. XLPE cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make-Gloster/KEI/RR)

Supply and Laying of 4 core 35 sqmm Al Ar. XLPE cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make-Gloster/KEI/RR)

Supply and Laying of 2 core 10 sqmm Al Ar. XLPE cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make-Gloster/KEI/RR)

Supplying and fixing of 4 core 185 sqmm compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

Supplying and fixing of 4 core 35 sqmm compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

Supplying and fixing of 2 core 10 sqmm compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

Finishing the end of 4 core 185 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Finishing the end of 4 core 35 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Finishing the end of 2 core 10 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Excavation of soft soil for installation of Earth Electrode and filling & ramming as perdirection of EIC.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Connecting the equipments to earth busbar including S & F 8 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply & delivery of OLP-3, 25A is a highly advanced microprocessor controlled starter used for ACs and other compressor loads.The time-Tested combination of Voltcheck, Ampcheck & Timecheck ensurs safe operation and long life of AC Comressurs. [Mrke: Electron/Ultratech/Ultrasafe] OLP-3, 25A Starter.

Supplying & Fixing of 4 Module GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (For AC)

Supply & fixing of Timer control panel on wall comprising of :- i) 230V 32A 2pole AC Mini power contactor -01 no., ii)Digital timer / Dial type Analogue Timer 24 hours capacity, 230V, AC supply- 01 no.. iii ) 230V, 40A DP MCB Isolator-01 no. iv) 230V AC toggle switch, single pole Double throw, 6A, 230V. v) 230V, 32A, barrier type terminal- 01 no.. vi) LED indicating lamp-01 no. vii) 15A, 8way nutral bar, to be mount on DIN rail with necy interconnection with 1.5 sqmm cu flexible wire ( Finolex / Havells )including ferrule marking & socketing within the 12 way SPNDB MCB enclosure box. Make - Legrand / ABB / Seimens (For AC at server room and 10th floor AC machines)

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

M/S R. K. ENTERPRISE (BID ID -6279275)

FAIRWAY ENTERPRISE (BID ID -6296550)

M/s. Kar Electric Works (BID ID -6308267)

M/S MANAB ENTERPRISE (BID ID -6308256)

SILICON SOFTWARE (BID ID -6305319)