Special repairs to Perimeter fencing from GD Post No.09 to GD Post No.13 and Provn of certain sanctioned works at Baddowal under GE Ludhiana.

Amount

Dismantling posts or struts (wood, steel or RCC) any section embedded in Concrete, brick work, masonry, etc, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in soft and loose soil and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as filled in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings c/c and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with dia of neck between 11mm to 15mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n.exc 5cm long complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 75x75mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

M&L two coat of synthetic enamel paint on new steel surface including priming with red oxide primer of any description over 10 cm in width or girth including preparation of new surfaces etc complete all as specified.

M&L one coat of Black Bituminous paint on new steel surface of any description over 10 cm width or girth including preparation of new surfaces etc complete all as specified.

M&L cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipe 150mm bore after they are laid and tested.

M&L 150mm reinforced concrete pipes, class NP3, laid and jointed completed with collars and jointed as specified.

M&L for brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:3, complete all as specified and directed.

M&L preparation of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floorand roofs n exc 20cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in beams, cantilever, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC1:2:4 type B1 (using 20mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L cutting into existing manhole for connecting new drains n.exc. 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified & directed .

S&F Mild steel TMT bar 6mm to 8mmdia and above cut to length, bent to shape required including cranling , bending spirally for hooping for column , hooking ends and binding with mild steel wire not less than 0.9mm dia complete all as specified & directed .

M&L for aggregate for loose filling, of gauge 80 mm to 150 mm graded of broken bricks in soakage pits, soackage wells complete all as specified & directed .

M&L for Cast Iron Manhole cover with frame of heavy duty (HD) casting and confirming to IS: 1726:1991 for clear opening 560x560mm and chequer of cover shall not be less than 4mm. Manhole cover and frame coated with material having base- with black bitumen composition. Frame shall be embaded in concrete firmly and complete all as specified & directed .

S&F Mild steel Round bar 20mm dia (For Rungs) and above cut to length, bent to shape rquired including cranling , bending spirally for hooping for column , hooking ends and binding with mild steel wire not less than 0.9mm dia Fe-410-W, Gde, E-250 quality complete all as specified & directed .

S&F cast iron 75 mm soil, waste and vent pipes in any length with or without ears, with cement joints laid in floors complete all as specified & directed .

S&F 75 mm bore cast iron cowls complete all as specified & directed .

M&L for Plain Cement concrete 1:3:6 type C2 (40mm graded crushed stone aggreagate) in foundations, filling and mass concrete complete all as specified & directed .

S&F Steel work in tubular/square tube trusses/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified & directed.

S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified & directed .

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed .

All as per item No 30 above above herein before but plain sheet complete all as specified & directed .

M&L for 150 mm thick compacted thickness WBM with coarse aggregate of granite, trap or basalt of grading 63 to 40 mm size or of grading 3 (50 to 20 mm size) spread rolled and consolidated with power roller exc. 5 tonne to 8 tonne to gradient and camber required complete all as specified & directed .

M&L for broken stone or boulders in Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed .

M&L for 100 mm Plain Cement concrete type D2, 1:4:8 (40 mm graded crushed stone aggregate) in sub base of floor complete all as specified & directed .

M&L 100 mm plain Cement concrete 1:2:4 type B1 using 20 mm graded aggregate in floor, paving and hard standing including necessary form work complete all as specified & directed .

M&L Forming 12mm thick expansion joints for 100mm thick concrete, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified & directed .

S&F mild steel sheet eaves gutters made of 1mm thick, galvanised classs 3, half round 150mm dia with rounded edges complete all as specified & directed .

S&F angles (Internal or external) or nozzle piece (outlets) made of 1mm for eaves gutters 150mm dia complete all as specified & directed .

S&F drop end (for spigot or socket ends) made of 1mm or nozzles for eaves gutter(150mm dia) complete all as specified & directed .

S&F stop ends (for spigot or socket ends) for eaves gutters complete (150mm dia) complete all as specified & directed .

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed .

S&F PVC (SWR) bend 110mm bore of any radius complete all as specified & directed .

Excavation over areas in soft/ loose soil n exc 1.5m deep and getting out complete all as specified & directed .

Excavation over areas in soft/ loose soil exc 1.5m dep and not exc 3.0m and getting out complete all as specified & directed .

Excavation over areas in soft/ loose soil, exc 3.0m deep and not exc 4.5m and getting out complete all as specified & directed .

Excavation in trenches n.exc 1.5 metre wide for foundations etc. and not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified & directed .

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed .

Removal of excavated surplus soil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed .

M&L for cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation bed/mass concrete complete all as specified & directed .

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified & directed .

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed .

M&L for Drilling bore hole 200mm dia upto 60 mtr depth by boring in soft/ hard soil by mechnicak method incl removing of excavated/ drilled material to a distance n.exc. 50m complete all as specified & directed .

M&L for PVC pipe 150 mm bore of 1st class with all necessary fitting complete all as specified & directed .

M&L for PVC pipe 150mm dia perforated/ slotted pipe of 1st class with all necessary fitting complete all as specified & directed .

M&L for gravel packing including jute bag as filter media 4 to 6 mm size complete all as specified & directed .

M&L for filling in trenches with gravel 2 to 4 mm size complete all as specified & directed .

M&L three coats white wash on wall surfaces incl prepartion of newly plaster surface as directed as specified

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified & directed .

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified & directed .

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 etc. complete all as specified & directed .

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:4 complete all as specified & directed .

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified & directed .

M&L 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surfaces even and smooth without using extra cement complete all as specified & directed .

M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finished the surfaces even and smooth without using extra cement complete all as specified & directed .

M&L three coats white wash on ceiling surfaces including preparation of newly plastered surfaces complete all as specified & directed .

M&L for 25 mm thick PCC 1:2:4 type B-1 with 20mm graded crushed stone aggregate as in flooring, finished even and fair complete all as specified & directed .

M&L Glazed ceramic coloured tiles (300x450mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed .

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified & directed .

S&F vitreous china wash basin with vitreous white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand and including supply and fixing of waste coupling ,waste pipe 32mm bore and PVC bend complete all as specified & directed .

S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float, flush pipe and handle and connection to pipe complete all as specified & directed .

S&F vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement & grating and union for discharge pipe complete all as specified & directed .

S&F urinal spreader of CP any colour for fixing with 15 mm dia pipecomplete all as specified & directed .

S&F PVC waste pipe for urinal etc. complete all as specified & directed .

S&F Wash down water closet (Pedestal pattern), complete white (including fixing bolts, seat cover) complete all as specified & directed .

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc complete all as specified & directed .

S&F 15mm dia fancy type long body Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type etc. complete all as specified & directed .

S&F shelf of PTMT fixed with and including chromium plated brass screw wooden/ plastic cleats (minimum weight 300 gms) complete all as specified & directed .

S&F tubular towel rail, aluminium anodised 20mm dia, D type 60 cm long between flanges complete all as specified & directed .

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws. complete all as specified & directed .

S&F 15mm dia Chromium plated fancy type bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed complete all as specified & directed .

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc. complete all as specified & directed .

S&F 15mm bore stop valve/angle valve , fancy type with chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed .

S&F 15mm stop cock cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type) complete all as specified & directed .

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed .

S&F 110mm bore PVC (SWR) bends any radius complete all as specified & directed .

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed .

S&F 75mm bore PVC PVC (SWR) bend of any radius complete all as specified & directed .

S&F PVC P-Traps for water closets of 110mm bore complete all as specified & directed .

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc. complete all as specified & directed .

All as per item No 91 above but of size of 20mm borecomplete all as specified & directed .

S&F rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for HDPE water tanks including S&F ball Brass valves high pressure with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe complete all as specified & directed .

M&L for Box type steel window/ventilator 1.25 mm thick made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars,wire mess, sheet glass, and painting shall be measured and paid seperately.

Supply only 4mm thick figured glass, pinhead type in squares not exceeding 0.5 sqm each pane complete all as specified & directed .

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed .

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified & directed .

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed . .

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection finished even and smooth (without using extra cement) complete all as specified & directed .

M&L 50 mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base floor complete all as specified & directed .

M&L for formwork to sides of concrete of concrete and foundation, footing,bases of column, raft and raft beam sides and soffits (if any) of foundations and plinth beams, and similar work vertical to batter complete all as specified & directed .

M&L RCC (nominal mix) 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in foundations including raft footings, foundations beams, bases for columns etc, basement slab under reamed piles and mass concrete complete all as specified & directed .

All as per item No 07 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified & directed .

M&L 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound, finished even and fair complete all as specified & directed . Note water proofing compound will be measured and paid separately under other item.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) laid on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application including M&L cleaning the new plastered surfaces with wire brushes, brooms etc. complete all as specified & directed .

M&L for applying a two coats of water proofing paint with aluminium paint above APP based polymeric membrance complete all as specified & directed .

M&L for PCC type B1 (1:2:4) using 20mm graded crushed stone aggregate as in coping including necessary form work complete all as specified and directed.

M&L precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified & directed .

Supply only liquid water proofing compound ISI marked as approved complete all as specified & directed .

M&L PCC (1:2:4) type B-2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified & directed .

M&L cutting existing drain pipe in position including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 internal dia of pipe 150 mm bore etc complete all as specified & directed .

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed .

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed,multi stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through PVC conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box / modular junction box, bell mouth, reducer, bend and flexible conduit etc and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.2 to1.6mm thick with 2 to 3 mm thick plastic laminated sheet with modular plate and shutter fixed with steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLSH cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point/fan point controlled by one switch SP one way.

All as per srl item No. 118 here in before but for one socket outlet 5 Amps on independent board complete all as specified & directed .

All as per srl item No. 118 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified & directed .

All as per srl item No. 118 here in before but with 2.5 Sqmm (nominal area) FRLSH cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLSH cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified & directed .

S&F socket out let 5 Amp, 5 pin flush type complete all as specified & directed .

S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified & directed .

M&L Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified & directed .

S&F for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified & directed .

Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F not less then 0.95, having efficacy more than 110 lm/W, with extruded aluminium housing, higher energy saving, high quality pc diffuser, reliable and robust housing structure, slim Integrated design, easy to install LED lighting fixture energy efficient complete all as specified and directed.

M&L Sub main wiring with PVC insulated cable copper conductor FRLSH two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLSH copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified & directed . Note : PVC conduit shall be measured and paid separately, if required at site.

M&L PVC rigid non metallic conduit fire proof medium grade ISI mark 25mm dia surface or concealed including conduit accessories such as tee, elbow ,bend junction box complete all as specified & directed . Note : Cutting chases shall be measured and paid for separately.

M&L for DB's 4 way TPN double door with bus bar of 200 Amps rated per fitted with MCB,and MCBs SP 6-32 Amps 10KA (as per site requirement) in outgoing circuits complete pre fitted and prewired with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified & directed .

M&L for sheet metal DB for MCBs, SPN, 8 ways, double door,singal phase, IP-43 company painted with 200 Amps rated bus bar, neutral bar/ connectors, each bar/ connectors, prewired complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc complete all as specified & directed .

M&L TPN MCB, 415 Volts, 50 Hz, having rupturing capacity 10 KA, C Curve of rating 40 to 100 Amps complete all as specified & directed .

M&L MCB SP 6 to 32 Amps, 10 KA, C-curve complete all as specified & directed .

M&L MCB SPN 32 Amps, 10 KA, C-curve complete all as specified & directed .

M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etccomplete all as specified & directed .

Supply and fix SPN MCB DB 4 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified & directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified & directed .

M&L earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified & directed .

CHOUDHARY ENTERPRISES (BID ID -3499821)