Construction of Mehsana City & Rural Sub-Division Office Building, including water sump, septic tank, rainwater harvesting system, RCC road, electrification, furniture, and fire safety system at Mehsana Campus under UGVCL, Mehsana Circle Office.

Schedule-B (Price Bid)

Name of Work: Construction of Mehsana City & Rural Sub-Division Office Building, including water sump, septic tank, rainwater harvesting

system, RCC road, electrification, furniture, and fire safety system at Mehsana Campus under UGVCL, Mehsana Circle Office.

Item.No Description of Item Qty. Unit Rate Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking 876.00 Cumt. 121.77 ₹

of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 417.00 Cumt. 134.98 ₹

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

3 Excavation for foundation for depth from 3.0m to 5.0m Including sorting out 8.00 CMT 314.48 ₹

and stacking of useful materials and disposing of the excavated stuff up to

meter lead (B)Dense or Hard soil (Manual Labour)

4 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 1109.00 Cumt. 135.56 ₹

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

5 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 987.00 Cumt. 267.08 ₹

thickness including watering, ramming and consolidating etc. complete. (upto

6 Providing and applying anti termite treatment, as per IS 6313 (part II & part III 363.00 Sqmt 79.82 ₹

2001) for building works in pre construction & post construction stages, using

chemicals conforming to relevant IS in water emulsion and effective when

applied uniformly over the area to treated. The chemical to be used is chloro-

pyriphos 20% EC or its equivalent. The treatment is to be carried out as per the

procedure mentioned below and treated plinth surface area is to be taken for

measurement. For pre construction treatment: For plinth filling &

periphery holes in side plinth to be drilled 300mm C/C each having depth 1.5 M

and for inside plinth the holes are to be treated with diluted chemical solution,

1.5 Lit. per hole, in the ratio of 1:20. The entire surface area is to be treated

with diluted solution 2.25 M per Rmt. In the ratio 1:20. The entire surface area

is to e treated with diluted solution of dose 2.5 Litres per Smt. over and above

as a plinth surface treatment.

7 Filling in plinth with sand under floors including watering ramming, 127.00 Cumt. 395.98 ₹

consolidating and dressing complete

8 Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 209.00 Cumt. 2617.18 ₹

Machine crush metal aggregates 40 mm nomial size) and curing complete

excluding cost of form work in (A) Foundation and plinth

9 Providing and laying controlled cement concrete M.250 and curing complete 195.00 Cumt. 4141.73 ₹

excluding the cost of formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings, Base of columns and Mass concrete.

10 Providing formwork of ordinary timber planking so as to give a rough finish 291.00 Cumt. 180.05 ₹

including centering shuttering strutting and propping etc. Height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc. and Mass concrete.

11 Providing and laying controlled cement concrete M.250 and curing complete 36.00 Cumt. 4448.86 ₹

excluding the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto floor

Item.No Description of Item Qty. Unit Rate Amount

12 Providing and laying controlled cement concrete M.250 and curing complete 7.50 Cumt. 4487.88 ₹

excluding the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto two

13 Providing and laying controlled cement concrete M.250 and curing complete 9.00 Cumt. 4526.90 ₹

excluding the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto Three

14 Providing formwork of ordinary timber planking so as to give a rough finish 288.00 Sqm 255.72 ₹

including centering shuttering strutting and propping etc. height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work in.

(C) Vertical surface such as walls (any thickness) partitions and the like

including attached buttresses & string course & the like. (upto 10 ton)

15 Providing and laying controlled cement concrete M.250 exposed work with 48.00 Cumt. 10163.67 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M (upto floor two level)

16 Providing and laying controlled cement concrete M.250 exposed work with 16.00 Cumt. 12513.80 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.12 Sq.M (upto floor two

17 Providing and laying controlled cement concrete M.250 exposed work with 25.00 Cumt. 10202.69 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M ((Above floor two to three level)

18 Providing and laying controlled cement concrete M.250 exposed work with 11.00 Cumt. 10241.71 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M ((Above floor three to four level)

19 Providing and laying controlled cement concrete M.250 exposed work with 80.00 Cumt. 7971.98 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS :(iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M (upto floor two level)

20 Providing and laying controlled cement concrete M.250 exposed work with 14.00 Cumt. 10717.09 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS :(i) Having cross-sectional area

21 Providing and laying controlled cement concrete M.250 exposed work with 35.00 Cumt. 8011.00 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M ((Above floor two to three level)

22 Providing and laying controlled cement concrete M.250 exposed work with 3.00 Cumt. 8050.02 ₹

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M ((Above floor three to four level)

23 Providing & Laying C.C. (1:1.5:3) / M-20 for R.C.C. work for Road pavement, 50.00 Cumt. 4654.88 ₹

using 12mm. to 20mm. Size black trap machine crushed metal including

necessary centering for all sides as required , mixing the concrete in mixer

machine, ramming with Vibrator, including keeping the joints between road

panels & finishing the Honeycombed surface if any, immediate finishing of Top

layer of road with trowel & spunch to create anti skid hard surface with curing

etc.. complete as per drawing & specification, & as directed by E.I.C. with supply

of cement by the contractor. ( REINFORCEMENT IF ANY WILL BE PAID

Item.No Description of Item Qty. Unit Rate Amount

24 Providing and laying controlled cement concrete M.250 and curing complete 51.00 Cumt. 6175.64 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) , Slab upto floor two level.

25 Providing and laying controlled cement concrete M.250 and curing complete 56.00 Cumt. 6214.66 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) , Slab upto floor two to three level.

26 Providing and laying controlled cement concrete M.250 and curing complete 5.00 Cumt. 6253.68 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) , Slab upto floor three to four level.

27 Providing and laying controlled cement concrete M.250 COPING and curing 15.00 Cmt 6190.60 ₹

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in © Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor two level.

28 Providing and laying controlled cement concrete M.250 and curing complete 8.00 Cumt. 6190.60 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C)Lintels (upto floor two level)

29 Providing and laying controlled cement concrete M.250 and curing complete 8.00 Cumt. 6229.62 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C)Lintels ( Above floor two level)

30 Providing and laying controlled cement concrete M.250 and curing complete 1.00 Cumt. 6268.64 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C)Lintels (up to floor three to four level)

31 Providing and laying controlled cement concrete M.250 and curing 6.00 Cumt. 6048.20 ₹

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja upto floor two

32 Providing and laying controlled cement concrete M.250 and curing 6.00 Cumt. 6087.22 ₹

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja upto floor two to

33 Providing and laying controlled cement concrete M.250 and curing complete 2.00 Cumt. 6126.24 ₹

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) Chajja upto floor three to four level.

34 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including 71005.00 KG 76.52 ₹

bending, binding and placing in position complete upto floor two level

35 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including 17175.00 KG 77.56 ₹

bending, binding and placing in position complete upto floor Three level

36 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including 4090.00 KG 78.60 ₹

bending, binding and placing in position complete upto floor Four level

37 Brick work using common burnt clay building bricks having crushing strength 186.00 Cumt. 3669.48 ₹

not less than 35 Kg./ sq.cm. in Super structure above plinth level (upto floor

two level) in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B) Conventional

38 Brick work using common burnt clay building bricks having crushing strength 74.00 Cumt. 3703.67 ₹

not less than 35 Kg./ sq.cm. in Super structure (above floor two to three level)

in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B) Conventional

39 Brick work using common burnt clay building bricks having crushing strength 45.00 Cumt. 3737.86 ₹

not less than 35 Kg./ sq.cm. in Super structure (Above floor Three to Four

level) in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B) Conventional

40 Brick work using common burnt clay building bricks having crushing strength 30.00 CMT. 3390.61 ₹

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

Item.No Description of Item Qty. Unit Rate Amount

41 Half brick masonary in common burnt clay building bricks having crushing 421.00 Sqmt. 584.40 ₹

strength not less than 35 Kg./Sq.cm. in cement mortar 1:4 (1cement :4 coarse

sand) in super structure above plinth level (up to floor two level). With

CONVENTIONAL BRICKS

42 Half brick masonary in common burnt clay building bricks having crushing 490.00 Sqmt. 589.70 ₹

strength not less than 35 Kg./Sq.cm. in cement mortar 1:4 (1cement :4 coarse

sand) in super structure above plinth level (above floor two to three level)

With CONVENTIONAL BRICKS

43 Half brick masonary in common burnt clay building bricks having crushing 23.00 Sqmt. 595.00 ₹

strength not less than 35 Kg./Sq.cm. in cement mortar 1:4 (1cement :4 coarse

sand) in super structure (above floor three to four level). With

CONVENTIONAL BRICKS

44 Providing 10mm thick cement plaster in single coat on brick/concrete ceiling 430.00 SQMT 149.88 ₹

for interior plastering upto two floor level and finished even and smooth in (ii)

Cement mortar 1:4 (1 cement : 4 Sand)

45 Providing 10mm thick cement plaster in single coat on brick/concrete ceiling 430.00 SQMT 173.59 ₹

for interior plastering (above floor two to three level) and finished even and

smooth in (ii) Cement mortar 1:4 (1 cement : 4 Sand)

46 Providing 10mm thick cement plaster in single coat on brick/concrete ceiling 50.00 SQMT 197.30 ₹

for interior plastering (above floor three to four level) and finished even and

smooth in (ii) Cement mortar 1:4 (1 cement : 4 Sand)

47 Providing 20 mm thick double coat mala cement plaster on interior brick / 3220.00 Sqm 281.51 ₹

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.Up To Floor Two Level

48 Providing 20mm. Thick double coat mala cement plaster on interior brick / 2250.00 SQMT 308.51 ₹

concrate work for plastering comprising of base coat of 12mm thick cement

plaster in (i) Cement mortar 1:4 ( 1 cement :4 coarse sand)in rough finishing

and 8mm thick top coat of cement mortar 1:2 (1 cement :2 coarse sand)

finished with trovel incl. scafolding, curing etc complete. up to floor two to

49 Providing 20mm. Thick double coat mala cement plaster on interior brick / 620.00 SQMT 335.51 ₹

concrate work for plastering comprising of base coat of 12mm thick cement

plaster in (i) Cement mortar 1:4 ( 1 cement :4 coarse sand)in rough finishing

and 8mm thick top coat of cement mortar 1:2 (1 cement :2 coarse sand)

finished with trovel incl. scafolding, curing etc complete.up to floor three to

50 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 190.00 RMT 42.62 ₹

51 Provinding Cement Vata ( 10cm x 10cm )size quarter round in cement mortar 1 : 259.00 RMT 24.04 ₹

1 including neat cement finishing, watering etc. Complete.

52 Providing & Laying Water Proofing Treatment in Sunken Portion of W.C., 23.00 SQMT 395.00 ₹

Bathroom, Terrace etc. by applying Cement Slurry mixed with water proofing

chemical ,as per manufacturer's specifications of approved make as under.

53 Providing & fixing china mosaic tiles flooring as water proofing treatment 525.00 SQMT 771.98 ₹

including (a ) Applying cement slurry of cement admixed with water proofing

compound after cleaning the surface properly. (b) Cracks in slab shall be open in

' V ' groove & all loose materials shall be removed & crack filling shall be done

with special & approved type of expanding crack fillet material . ( c )

Depressions in slab if any be filled up with C.C.(1:2:4 ) I.P.S.flooring. ( d ) P / L

20 mm thick plaster layer in C.M. ( 1:4 ) with cement admixed with water

proofing compound including rounding of junction of walls and slab by making

cement vata. ( e ) Finishing the surface with china mosaic tiles (pieces )

flooring incl.fixing the same in cement mortar (1:2) setting with ready made tile

adhesive as recommended by manufacturer’s including fillings of joints mixed

with pigmented white cement slurry of matching shade & finally finishing the

surface with trowel with white cement slurry etc., complete ( f ) After finishing,

the whole terrace shall be flooded with water to check the performence of

Item.No Description of Item Qty. Unit Rate Amount

54 Providing & laying GVT Vitrified tiles flooring & skirting over 20 mm (average) 685.00 SQMT 2340.00 ₹

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including Making 3 mm spacer at

joint of tiles and fill the spacer with epoxy jointing material ,finised with flush

pointing & cleaning the surface etc complete selection as directed by

Architect/E.IC ( Size -1.20 Mt. X 0.60 Mt.)make:Sommany,Nitco,Kajariya or

equivalent (Double Charge)

55 Providing and laying polished Kota stone slab flooring over 20mm (Average) 60.00 SQMT 1008.91 ₹

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

56 Providing and laying 18mm thick polished GRANITE STONE SLAB flooring ,trade 340.00 SQMT 4454.67 ₹

of step ,Landing , door sill (umra) on 20mm (average) thick base of cement

mortar 1:5 (1 cement : 5 course sand) laid over and jointed with coloured

cement slurry including rubbing and polishing and including making half round

moulding to toe of treads etc.. complete as directed by E.I.C. (any colour) .for all

57 Proving and fixing 18mm th. Both side Mirror Polished black granite of 14.00 SQMT 2158.06 ₹

approved quality full molded round front edge as urinal partition and wash

basin counter fixed with wall in cement mortar 1:3 including rubbing and

polishing with necessary bonding with adhesive etc. complete. (Both edges are

round in shape with polishing)

58 Providing and laying Ceramic tiles 6 mm thick in flooring and landing laid on a 85.00 SQMT 984.52 ₹

bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement at all floor level

59 Providing and laying Ceramic tiles 6 mm thick in dedo on 10mm thick cement 385.00 SQMT 1079.52 ₹

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry at

all floor level

60 Providing and fixing standared extruded of alluminium section of size 63.50 x 10.00 SQMT 1509.90 ₹

38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour

anodized alluminium frame with 5 mm thick transparent bronze colour tinted

float glass with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete (work for all the floors)

61 Providing and fixing window having extruded aluminum Colour anodized 105.00 SQMT 1696.73 ₹

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical

member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @

wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

62 Providing and fixing FRP FRAME size 125x 65 mm and 36mm thick FRP shutter 22.00 SQMT 2589.15 ₹

with wood grain raised panel design finish shutter having extra reinforcement

on sides and edges and in Gel coat finish. The core of the shutter is to be filled

up with injected fire retardant grade polyurethane foam done in situ along with

embedded wooden pieces for stiffening and also for taking hinges and fixtures.

The whole FRP frame and shutter is to be water proof, weather proof, termite

proof and resistance to mld acid/Alkali, Rates are to be inclusive of S.S. hinges

with necessary screws and alluminium fixtures and fastening. Product should

have 3 years performance guarantee and complete have ISO 9001-2000

Item.No Description of Item Qty. Unit Rate Amount

63 Wall painting two coats with weather proof acralic emulsion APEX type paint 1090.00 SQMT 73.02 ₹

of approved brand & manufacture and of required shade on exterior wall

surface to give an even shade over and including a primery coat with alkaly

resistance primer of approved brand after throughly brushing surface to

remove all dirt and remains of loose powdered materials etc comp. for all

64 Texture paint :Wall/ Ceiling painting two coats (1 base plus 1 texture) with low 1850.00 SQMT 473.00 ₹

VOC as per approved brand (Like Asian, Burger, nerolac etc.) in any shades and

colour as directed on wall surface to give an even shade including applying coat

of putty, Penetrating primer or equivalent and two coats of paint, scaffolding to

at any height with all labour and material thoroughly brushing the surface free

from mortar droppings and other foreign matter and sand prepared smooth

etc. complete. The substrate must be sound, clean, dry, free from dust, oil,

grease and laitance etc. All traces of release agents must be removed. On chalky

and dusty surfaces, all loose material must be removed by stiff bristle brushing.

The primer/ paint application is to be done with the rollers. Rate shall be

including crack filling and levelling as per manufacturers specfication. Top coat

should have. 1) Low VOC content. 2) Crack Bridging ability upto 2.6 mm. 3)

100% pure weather proof exterior emulsion. 4) Anti-Carbonation concrete

protection. 5) Very Low Flame spread. 6) Superior Washability.

65 Wall painting with (two coat) plastic emulsion paint of approved brand and 4920.00 SQMT 122.34 ₹

manufacture on undecorated wall / Ceiling surfaces to give an even shade

including thoroughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth including two coat birla putty & two

coat Primer of approved brand. (work for all the floors)

66 Providing and fixing in position S.S. hand rail in main stair case, landing 100.00 Rmt 3035.10 ₹

,balconies etc. inHorizontal 2"(50mm) dia S.S. pipe & Four horizontal 3/4"(

mm) S.S. pipesize S.S.Resting by Round bars 1.5" dia of clear height 90cms

placed at 3feet c/c including making necessary hold fast fixture taircase

concrete for resting the S.S 304 grade . vertical posts with holding etc. as per

approved design and as required for the work including bending hand rail pipe

to proper shape in curves with specials etc. complete . Railing height is 0.9M.

67 Providing and fixing M.S. grills of required pattern to wooden frames of 1890.00 KG 105.24 ₹

windows etc. with M.S. flats at required spacings and frame alround, square or

round bars with round headed bolts and nuts or by screws (A) Plain Grill

68 Providing and laying KITCHEN PLAT FORM CONSIDERING HEIGHT =0.75MT 12.00 SQMT 3000.00 ₹

(sandwich type) with machine cut single side polished 18 to 20mm thick

GRANITESTONE (Green / approved colour) & 25mm thick KOTAH STONE

including making gissi in brick wall and fixing the sized polished kotah stone

pieces sandwitch type in vertical position ,single polished granite stone

horizontal and vertical facia ,facia patti,making hole for gas piping ,and at top

sandwich type including half round moulding filling gap with cement putty and

cement mortar etc,complete in true line and level as per detail drawing and

directed by E.I.C..

69 Constructing brick masonry chamber for underground C.I. Inspection chamber 6.00 No 8398.83 ₹

and bends with briocks having croshing strength not less than 35Kg. Cm2 in

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(ii) Inside

dimensions and 450mm deep for pipe line with one or two inlets. (upto

ton)inside dimension 600 mm x 850 mm and 450 mm deep for three or more

inlet pipe line + Extra over items Above for every additional depth of

0.1M. (4 Times) of part thereof beyond 450mm depth for Brick

masonry chamber.(iii) for 600mm x 850mm size.

70 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 12.00 No 1234.57 ₹

water tight (i) Square mouth traps.(B) 150mm x 100mm size P or R type.

Item.No Description of Item Qty. Unit Rate Amount

71 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 60.00 RMT 671.19 ₹

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete.(D)

300mm (upto 10 ton)

72 Providing & Fixing 75 mm dPVC -U SWR COWL VENT of (FiINOLEX / SUPREME) 12.00 No 389.15 ₹

brand of working pressure 4 kg/sq.cm including jointing with adhesive solvent

cement including fixing thensame in true line and level etc complete as directed

73 Providing & Fixing 110 mm dPVC -U SWR COWL VENT of (FiINOLEX / SUPREME) 18.00 No 500.17 ₹

brand of working pressure 4 kg/sq.cm including jointing with adhesive solvent

cement including fixing thensame in true line and level etc complete as directed

74 Providing and fixing to wall ceiling and floor 10 Kg. F/Cm2 working pressure 60.00 Rmt 277.46 ₹

polythene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(F) 75mm

75 Providing and fixing to wall ceiling and floor 10 Kg. F/Cm2 working pressure 136.00 Rmt 335.69 ₹

polythene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(F) 110mm

76 Providing, laying and jointing (to level or slopes) 110mm diameter PVC-U SWR 80.00 Rmt 1109.00 ₹

pipes (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI 14735-1999 of ISI (PRINCE

/ SUPREME / ASTRAL / FINOLEX / Equivalent) for drainage-line fitted in trenches

including excavation for trenches & refilling, Pipe shall be jointed with each

other with rubber lubricant, including necessary fittings such as bends, shoes

etc. including testing of pipe & joints and jointed with adhessive solvent cement

including the cost of all materials etc... completed as directed by E.I.C.(110mm

77 Providing, laying and jointing (to level or slopes) 160mm diameter PVC-U SWR 80.00 Rmt 1064.00 ₹

pipes (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI 14735-1999 of ISI (PRINCE

/ SUPREME / ASTRAL / FINOLEX / Equivalent) or approved brand for drainage-

line fitted in trenches including excavation for trenches & refilling, Pipe shall be

jointed with each other with rubber lubricant, including necessary fittings such

as bends, shoes etc. including testing of pipe & joints and jointed with

adhessive solvent cement including the cost of all materials etc... completed as

directed by E.I.C.

78 Providing and fixing to wall ceiling and floor 10.0 kg. F/cm2 working pressure 80.00 Rmt 335.69 ₹

polythylene pipes of the following outside dia. special density, complete with

special flange compression type fittings, wall clips etc. including making good

the wall ceiling and floor. b) 110mm.dia.pipe. (Rain water Pipe)

79 Providing, laying and jointing in true line nand level 15 mm dia. UPVC Pipe (SCh- 60.00 Rmt 71.93 ₹

40) for cold water including fittings make prince / SUPREME / ASTRAl / FINOLEX

or equivalent as aprooved by SIC. Pipe shall be fixed on the wall with the help of

clamp at every 2 m c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adesive

sovent, includung cost of all materials

80 Providing, laying and jointing in true line nand level 25 mm dia. UPVC Pipe (SCh- 90.00 Rmt 90.93 ₹

40) for cold water including fittings make prince/SUPREME/ASTRAl/FINOLEX or

equivalent as aprooved by SIC. Pipe shall be fixed on the wall with the help of

clamp at every 2 m c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adesive

sovent, includung cost of all materials

81 Providing, laying and jointing in true line nand level 32 mm dia. UPVC Pipe (SCh- 50.00 Rmt 117.97 ₹

40) for cold water including fittings make prince/SUPREME/ASTRAl/FINOLEX or

equivalent as aprooved by SIC. Pipe shall be fixed on the wall with the help of

clamp at every 2 m c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adesive

sovent, includung cost of all materials

Item.No Description of Item Qty. Unit Rate Amount

82 Providing, laying and jointing in true line nand level 40 mm dia. UPVC Pipe (SCh- 60.00 Rmt 146.65 ₹

40) for cold water including fittings make prince/SUPREME/ASTRAl/FINOLEX or

equivalent as aprooved by SIC. Pipe shall be fixed on the wall with the help of

clamp at every 2 m c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adesive

sovent, includung cost of all materials

83 Providing, laying and jointing in true line nand level 50 mm dia. UPVC Pipe (SCh- 155.00 Rmt 193.73 ₹

40) for cold water including fittings make prince/SUPREME/ASTRAl/FINOLEX or

equivalent as aprooved by SIC. Pipe shall be fixed on the wall with the help of

clamp at every 2 m c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adesive

sovent, includung cost of all materials (excavation of earth in trenches and

filling will be paid separately)

84 Providing & fixing stainless steel sink with drain board of approved make & size 2.00 No. 1575.00 ₹

of 1'-6" *1'-5" * 0'-7" incl. Waste couplin & waste pipe for water stand as

85 Providing and fixing screw down bib taps of following size.(A) Brass screw down 16.00 NOS 184.98 ₹

bib tap polished bright. (i) 15mm dia.

86 Providing and fixing PVC SWR Nahni trap IS14735 for drain-100mm diameter 16.00 NOS 580.79 ₹

with jali of the following nominal diameter of self clean sing design with C.I

scread down or hinged grating including the cost of cutting and making good

87 Providing & Fixing EUROPEON TYPE W.C. commode of CERA make including 8.00 NOS 3502.39 ₹

necessary `P' or `S' trap, bends & having plastic `ARAM' seat with cover fixing

with screws with fixtures & connection for flush cock etc., complete including

C.I. Pipe connection up to manhole chamber for G.F. & up to outside wall for

other floors with bends etc., complete in working condition as directed by

E.I.C.(with 12.5 liter PVC flush Tank incl. all accessories) Providing & fixing

plastic seat cover for wash down water closet with C.P brass hinges and rubber

buffers.(B) Black plastic seat and coverProviding and fixing 12.5 litres low level

flushing cistren with a pair of C.L.I. Or Mild Brakets, complete with fittings such

as symphonic arrangements, 15 mm. nominal size brass ball valve with plythene

float lever, G.I.chain (60 cm.) and pull union and couplings for connections with

inlet, outlet and over flow, pipes etc. including cutting holes in walls and making

good the same (over flow pipe to be measured and paid for seperately) Item

including providing & fixing jet spray.(Including MR for Jet Spray Rs. 361.00)

88 Providing and fixing Wash Basin vitreous china table top wash basin size 2.00 NOS 10550.00 ₹

425x340x175MM in white colour with single hole for pillar tape with CP or MS

brackets painted white including cutting holes and making good the same

including (1) Providing and fixing SS waste coupling of 32 mm dia size half

theread with 80mm height for wash basin with rubber plug (2) Providing and

fixing SS bottle trap with internal partition of 32mm size with 250mm &190mm

long wall flange connection pipes and wall flange of approved quality with

necessary fitting for wash basin (3) Providing and fixing SS Pillar cock with

extention body with necessary fittings etc. complete (4) Providing and fixing SS

finish Angular Stop Cock quarter turn with necessary fittings (5) Providing and

fixing SS finish soap dispenser with metallic bottle ,Towel ring etc. complete

make: SOMANY,CERA.

89 Providing and fixing ball cock of approved. quality as directed. 2.00 NOS 131.57 ₹

(A) Copper Metal (i) 25mm dia.

90 Providing erecting and fixing double coated Syntex PVC. (ISI) Water Tank of 5000.00 LITRE 3.91 ₹

required capacity each with all necessary fitting and connection etc. complete

91 Provinding and fixing 600mm x 450mm bevelled edge MIRROR of superior glass 8.00 NOS 850.90 ₹

mounted on 6mm thick A.C. sheet or plywood sheet fixed to wooden plugs with

C.P. brass screws & washers.

92 Providing & Fixing & functioning of UPVC ball Valve as approved make as 12.00 NOS 349.00 ₹

directed by EIC(25mm)

Item.No Description of Item Qty. Unit Rate Amount

93 Providing & Fixing & functioning of UPVC ball Valve as approved make as 8.00 NOS 997.65 ₹

directed by EIC(40mm)

94 Providing & Fixing 50 mm.dia. UPVC valve. 2.00 No. 779.00 ₹

95 Providing & laying 20 to 25mm thick, both faces polished kotah stone with all 180.00 SMT 1008.91 ₹

edges machine cut up to 450mm width and of required length (only one piece

to be used ) of approved quality for cupboard shelves including fixing the same

in masonry wall/ RCC work.

96 Providing & Fixing white / coloured porcelain flat back wall type URINAL PAN of 6.00 NO. 2508.00 ₹

CERA make having size 590 * 375 *390 mm of approved quality & make

including waste coupling bends & necessary outlet of 25mm.dia. G.I. Pipe

connections including providing brass stop cock ( pillar cock type ), PVC

connection,spreader & spreader pipes,brackets etc., completed as directed by

97 Providing & fixing CERA make wash basin with single hole for pillar tap with C.I. 6.00 NO. 1504.46 ₹

or M.S. brackets painted white including cutting holes & making good the same

but excluding fittings. Vitreous China Flat back of size 550mm. X 400mm. Colour

as directed by EIC

98 Providing & Fixing hinged type 40mm. square. M.S. Pipe gate as per drawing & 17.00 Sqm 2394.00 ₹

design incl.erection of gate with necessary hinges supported to vertical girders,

locking arrangement by providing & fixing aldrop on both sides, with 3 coats

of oil painting of approved shade & make with one coat of red oxide

primer etc., complete as directed by E.I.C. (COST DOES NOT INCLUDE THE

COST OF COLUMNS, STEEL/JOISTS, CONCRETE, MASONRY ETC.)

99 PROVIDING AND FIXING IN POSITION 72 +-3 SPIRAL TURNS IN EACH 9 MTR OF 163.40 RMT 375.00 ₹

RECOMMENDED STRETCHED (LAID) LENGTH & 750 MM EFFCTIVE DIA (AFTER

LAYING) HOT DEEP GALVANIZED CROSS SPIRE TYPE RAZOR TAPE CONCERTINA

COIL WIRE USING A CENTRAL CORE WIRE HIGH CARBON SPRING STEEL (HIGH

TENSILE WIRE) MADE UP OF 2.6 MM DIA AS PER IS: 4454, PART-1, GRADE-II

HAVING MINIMUM GALVANIZING OF 230 - 250 GMS PER mm2. AROUND

WHICH A TAPE OF RAZOR SHARP BARBS STRIP OF 0.5 MM THICK & 19 MM

WIDTH CONFORMING TO IS: 513 DD QUALITY HAVING MINIMUM GALVANIZING

COATING OF 12 MICRONS WITH SERIES OF BARBS PUNCHED ALONG THE

LENGTH AT REGULAR INTERVAL.(APPROXIMATELY 160 BARBS PER RUNNING

METER OF CONCERTINA COIL IS MACHINE CRIMPED WITH 4 TO 5 NO OF CLIPS

PER EACH SPIRE MADE UP OF STEEL(SS304). INCLUDING FIXING OF

CONCERTINA COIL ON 4 RUNS OF SUPPORT FIXED THROUGH OUT THE

COMPOUND WALL WITH THE HELP OF REQUIRED GI U-NAILS / SPLIT PIN,

SCAFFOLDING ETC; COMPLETED AS PER DETAILD SPECIFICATION & AS

DIRECTED BY ENGINEER IN CHARGE. 4 Nos. of runs of support of RBT will be

paid in seperate item.

100 PROVIDING AND FIXING IN POSITION SUPPORT OF RBT (RAZOR BARBED TAPE) 653.60 RMT 24.00 ₹

MADE OF 2.6 MM DIA AS PER IS: 4454, PART-1, GRADE-II HAVING MINIMUM

GALVANIZING OF 230-250 GMS PER SQMM. FIXED ON ANGLE SUPPORT OF

COMPOUND WALL WITH THE HELP OF GI U-NAILS / SPLIT PIN INCLUDING

SCAFFOLDING ETC; COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.

101 Steel work welded in built up sections,framed work including cutting, histing, 31.50 Quintel 9018.30 ₹

fixing in position and applying a priming coat of red lead paint :- (A) In beams

and joints channels angles, tees, flats with connecting cleats as in main and

cross beems, hip and jack reffers, purlins connected to common raffers and the

102 Painting two coats (including priming coat) on new steel and other metal 90.00 Sqm 127.76 ₹

surfaces with enamel paint, brushing interior to give an even shade including

cleaning the surface of all dirt, dust and othr foreign matter.

103 P/F corrugated colour coated GI sheet roofing of Jindal or Equivalent make 155.00 Sqm 600.00 ₹

having width of 1050mm ( effective 1000mm) and fixed with colour coated

galvenized iron 'J' or 'L' hooks, bolts & nuts 8mm diameter , with bitumen and

G. I. Limpet washers filled with white lead complete excluding the cost of

Purlins , Rafters and trusses .(0.60 mm. Thick Sheet.)

Item.No Description of Item Qty. Unit Rate Amount

104 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 225.00 SQMT 692.91 ₹

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

105 Providing & fixing precast concrete kerb stone of grey cement based concrete 155.00 RMT 185.61 ₹

block having size 30 cm length *30 cm height *7.5 cm thick of M-250 grade

concrete as per approved design & including excavation for fixing in proper line

and level, filling the joints with C.M. 1 : 3 ( 1 Cement : 3 fine sand ) etc complete

106 P&F Carpet Lawn Levelling and planting the same at required place and 225.00 SMT 247.00 ₹

maintaining the same till well established by regular watering, weeding,

cleaning, lawn moving four times in a month, Applying Fertilizer, Pesticides & all

other garden related work should be done ( about 60 days ). Company will

supply only water free of cost.

107 Providing plantation & development of plants, but for following plants. 10.00 No 940.00 ₹

Spethodia, Bottle Brush, Bahunia, Bakul, Black Ficus, Bottle Palm, Arica Palm,

Sampion Palm, Terminalia Etc Bag Size Of (21 x 21) & maintaining till well

established OR as approved by EIC.

108 Providing plantation & development of plants , but for following plants Red 10.00 No 150.00 ₹

Machera OR as approved by EIC.

109 Providing plantation & development of plants , but for following plants Vidhya 100.00 No 250.00 ₹

Golden OR as approved by EIC.

110 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with 9.00 No 6633.00 ₹

excavation of size 1.66x1.66x m 1.05& 0.15m thick c.c.1:2:4 bed concrete

including brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with

15mm thick cement plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of

thickness 0.15m with CRS steel and 0.60mx0.45m cast iron manhole cover with

frame weight not less than 35 kg as per directed by Engineer-in-charge.

111 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m 9.00 No 20342.00 ₹

& excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete

of 0.15m thick including brick work in c.m 1:6 for 23cm thick wall including

15mm thick cement plaster inside & outside with cement slurry & 10cm thick

RCC 1:2:4 top cover with frame of minimum weight of 35 kg & filling filter

material kapchi in layers (25-40mm & 10-20mm) & BT metal 40mm & sand as

per directed by Engineer-in-charge.

112 Drilling in soil with lowering of pipes concrete sealing including gravel packing 20.00 Rmt 400.00 ₹

clay breaking and development of bore with air compressor by required

capacity vertical test etc. complete including the cost of benimeter 250mm dia.

113 Supplying slotted PVC pipes of approved quality at site of work confirming to IS. 20.00 Rmt 570.00 ₹

114 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 50.00 Rmt 714.00 ₹

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(G)160 mm

115 Providing & Laying C.C. (1:1.5:3) / M-20 or for plain or R.C.C. work for Road 93.00 CMT. 4654.88 ₹

pavement, using 12mm. To 20mm. Size black trap machine crushed metal

including necessary centering for all sides as required , mixing the concrete in

mixer machine, ramming with Vibrator, including keeping the joints between

road panels & finishing the Honeycombed surface if any, immediate finishing of

Top layer of road with Trowel & spunch to create anti skid hard surface with

curing etc.. complete as per drawing & specification, & as directed by E.I.C. with

supply of cement by the contractor. ( REINFORCEMENT IF ANY WILL BE PAID

116 Compaction and finishing of cement concrete road by trimix M.250 with Trimix 914.00 SQMT 51.87 ₹

Vacumm dewatering system with power trowling sheet form work with M.S.

channels, srinking of fair hardness, with 10 mm x 10 mm size groove cutting in

concrete as constructution joint and 12 mm thick premix expansion joint at

every 20 Meter length. Providing and pouring sealent of FOSROC or equivalent

with necessary equipments, labors etc. Complete.

Item.No Description of Item Qty. Unit Rate Amount

117 20mm. Thick sand faced (Tipani) cement plaster on walls up to height 10 meters 1020.00 SMT. 317.92 ₹

above ground level consisting of 12mm. Thick backing coat of C.M. 1:3 (

cement : 3 sand ) and 8 mm. thick finishing coat of C.M. 1:1 ( ! Cement :1 sand)

etc.. Complete.

118 Providing and fixing C.I. Manhole cover 0.60 mm x 0.45 size having weight not 5.00 No. 948.68 ₹

less than 35 kg.

119 Providing & applying Dr.fixit( pidilite)LW+ OR equivalent, In RCC Work using 184.00 Ltr 78.00 ₹

200ml per bag as directed & instructed by E.I.C

120 Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 5.00 SMT. 296.98 ₹

4 graded stone aggregate 20 mm. Nominal size) laid in one layer finished with a

floating coat of neat cement.( 40 mm thick IPS flooring )

121 Providing and construction SOAK WELL of 3.0 mt internal dia & 6 mt internal 1.00 Nos. 88682.99 ₹

clear depth including the cost of excavation, foundation, honeycombed

masonary, full brick masonary in CM (1:6), RCC M25 grade for top slab, RCC top

MH Cover 650 X 550 mm filling with dry brick bats up to 1 mt depth, curing,

reinforcement, and 75mm dia cowl vent etc. complete as per detailed drawing

and directed by EIC.

122 Supplying, installing, testing and commissioning of fire authority approved 1.00 Set 153500.00 ₹

Electric motor Driven Horizontal Monoblok Pump Set suitable for automatic

operation and consisting of following: complete in all respect as

required.70MTR head & 1250 & Above LPM with suitable HP (make-

LUBI,CRI,DUKE) and construct a support base of cement for a fire pump and

install shock /vibration observation pad for helps to reduce vibrations and

protect the motor also include Fire Pump Cover Box for Protect from the Rain.

123 Supplying, installing, testing and commissioning of Control Panel/Fire panle 1.00 Set 32000.00 ₹

suitable for auto start and stop of fire pump with the provision of push buttons

for manual & with Labour work(make-L&T)

124 Providing and fixing of dial type Pressure Guage having 100 mm dial & range of 3.00 Each 1650.00 ₹

0-15 Kg/cm2 with syphon and cock.& with labour work

125 Providing and fixing of dial type Pressure Switch range of 0-8 Kg/cm2 with 3.00 Each 3700.00 ₹

syphon and cock. For Auto Pump - off & with labour work.

Providing, fixing, testing and commissioning of above ground M.S "C" class

heavy duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm

dia. And above) including cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers, clamps, hangers, angles,

channels, anchor fastners etc. including cutting holes and chases in brick / RCC

walls / slabs complete with painting of one coat of primer and 2 or more coats

of synthetic enamel paint of approved make / shade complete as per

specification. All core cutting or holes made in wall or slab are refixed as it is

earlier and as instruction of EIC. MAKE-TATA,ASIAN,JINDAL

Providing and fixing, testing and commissioning of CI Buterfly valve (PN 1.6)

with integrally moulded linear of nitrile or EPDM. Stainless steel Disc & Steam

Lever operated with ISI Marked as required. Make-KARTAR ,SANT,ZOLOTO

Providing, fixing, testing and commissioning of dual plate non-return valve of

following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts,

nuts, washers etc. as required.

Providing, fixing, testing and comissioning of S.S Ball valve of sizes: MAKE-

KARTAR ,SANT,ZOLOTO

Providing, fixing, testing and comissioning of FUTVALVE of sizes:

Item.No Description of Item Qty. Unit Rate Amount

135 Providing, fixing, testing and commissioning of SS single headed ISI marked 3.00 Each 6500.00 ₹

oblique pattern hydrant landing valves as per IS: 5290 with 80 mm dia flanged

inlet & 63 mm dia female outlet complete with PVC cap. MAKE-. NEWAGE,

WINCO,SWATI,PROTECTO

136 Providing, fixing, testing and commissioning of 63 mm dia 15m long RRL hose 3.00 Each 5800.00 ₹

pipe with 63 mm dia. Male and female SS couplings duly binded with GI wire,

rivets etc. conforming to IS 636 (type-A) as required.

137 Supplying and fixing First Aid hose reel with MS construction spray painted in 3.00 Each 7800.00 ₹

post office red, conforming to IS 884 with upto date amendments, complete

with the following as required.25 MM DIA HOSEREEL WITH S. SBALL VALVE

ANDS. S SUTUP NOZZEL WITH RUBBER PIPE 30 MTR LENGTH... MAKE NEWAGE,

138 Providing, fixing, testing and commissioning of Weather proof standard fire 3.00 Each 2500.00 ₹

hose cabinet stand mounting type (750 mm x 600 mm x 250 mm deep) having

single or double opening with M.S. Fabricated Stand, necessary locking

arrangement by allan key suitable for housing 2 nos. hose pipe, 1no. Branch

pipe & nozzle spaner. MAKE- Safelife / Swati

139 Supplying, fixing, testing and commissioning of 2 way fire brigade connection 2.00 Each 6500.00 ₹

of cast iron body with 2 nos. gun metal instanteneous inlet couplings complete

with cap and chain as required for 100 mm dia MS pipe connection, conforming

to IS 904as required.

140 Providing, fixing, testing and commissioning of Standard SS branch pipe 3.00 Each 1300.00 ₹

with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to fit

with standard instanteneous type 63 mm dia

Providing and fixing,testing and commissioning of fire alarm and pump trigger

system as per requirement and specification consisting of following items

MAKE-SEPTAP,AGNI

141 Manual call point 3.00 Each 750.00 ₹

142 Hooters 3.00 Each 750.00 ₹

143 Pump On / Off switch 3.00 Each 650.00 ₹

144 CABLE 1 SQMM 3 CODE WITH CONDUIT PVC 80.00 RMT 240.00 ₹

145 CABLE 1 SQMM 2 CODE WITH CONDIT PVC 80.00 RMT 220.00 ₹

146 4-core 4sqmm 80.00 RMT 171.00 ₹

147 smoke detector 65.00 Each 974.58 ₹

148 Providing and fixing,testing and commissioning of Fire Alarm Panel- 2 Zone as 1.00 Each 5000.00 ₹

instruction by EIC make-AGNI

149 Core Cutting 3.00 Nos 762.71 ₹

150 Supply & Installation of 8 ZONE panal for smoke detector 3.00 Nos 5254.24 ₹

151 Providing and fixing,testing and commissioning 2000 litre tripal layer white PVC 1.00 Each 11500.00 ₹

water tank on terrace. As instruction of EIC

152 APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY 1.00 Each 21186.44 ₹

Getting of Fire Fighting System Approval from local fire authority with all other

charges and documentations for getting No Objection Certificate. (including

FSPA,FSCA,FSCR) (inlcuding 3 year maintenace with aggrement)

153 NOC Receipt Fee as per government rules & regulation guideline. 600.00 SMT 10.00 ₹

154 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following 6.00 Nos 6167.00 ₹

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [A] ABC dry powder stored pressure type 6 kg

capacity (IS:15683).

155 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following 6.00 Nos 10130.00 ₹

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [B] For 6.5 KG Capacity

Item.No Description of Item Qty. Unit Rate Amount

156 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 280.00 Pt. 445.00 ₹

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC

pipe and accessoriesCat. III

157 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both 24.00 Pt. 632.00 ₹

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME four or more step

type electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and

accessoriesCat. III

158 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are 16.00 Pt. 782.00 ₹

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.[II] For 16A Plug with 2-4

159 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket 280.00 Pt. 255.00 ₹

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessoriesCat. III

160 Providing following type of Modular Type Accessories mounted with pvc / 22.00 Nos. 208.00 ₹

metallic box, single mounting base frame covered with textured / metallic front

plate , modules erected with necessary connection. As desired by Engineer In

charge3) Two Pin/ RJ-11 Telephone Socket, [B] For Two Gang, Cat.III

161 (7) Blank Plate Single 200.00 Nos. 25.00 ₹

162 (8) Modem Jack for Computer Open RJ-45, Cat.III 54.00 Nos. 159.00 ₹

163 (9) 16 Amp. SP one way switch, Cat.III 110.00 Nos. 171.00 ₹

164 (10) 6/16Amp. Universal socket, Cat.III 110.00 Nos. 179.00 ₹

165 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 560.00 Mtr. 62.00 ₹

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and accessoriesb) 2 wire 1.5 sq. mm

166 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 5530.00 Mtr. 82.00 ₹

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and accessoriesb) 2 wire 2.5 sq. mm

167 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 240.00 Mtr. 111.00 ₹

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size(a) with medium class

Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Item.No Description of Item Qty. Unit Rate Amount

168 Supplying & erecting approved make Telephone Cable electrolytic copper 400.00 Mtr. 20.00 ₹

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured2) Two Pairs

169 Supplying & erecting approved make LAN cable of following size in existing pipe 900.00 Mtr. 47.00 ₹

as per direction.[C] CAT -

170 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 1000.00 Mtr. 33.00 ₹

complete to be erected on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

171 Providing and erecting Decorative call bell Ting-tong box type 250 volts 4.00 Nos. 71.00 ₹

complete erected

172 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of 100.00 Rmt 21.00 ₹

coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm

173 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 90.00 Mtr. 27.00 ₹

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.(a)

One wire 2.5 sq. mm.

174 (a) One wire 6.00 sq. mm. 60.00 Mtr. 56.00 ₹

175 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv 300.00 Mtr. 46.00 ₹

grade ISI marked copper wires of following size to be erected as directed.e)

1.50 Sq.mm 3 core round PVC sheathed

176 Providing and erecting Miniature circuit breaker single pole 6A to 32A suitable 30.00 Nos. 111.00 ₹

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

177 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 2.00 Nos. 662.00 ₹

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (a) 40 Amp. Cat.III

178 Providing and erecting Sheet Steel powder coated MCB distribution board - 6.00 Nos. 1893.00 ₹

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used (L)

Three phase 6 way SS Double door for single phase outgoing horizontal box

179 Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 2.00 Nos. 3010.00 ₹

and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed

.(ii)63 Amps. FP Cat III

180 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 2.00 Rn.Mtr 1942.00 ₹

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

Item.No Description of Item Qty. Unit Rate Amount

181 Providing & erecting weather proof, dust & vermin proof, floor mounted front 4.00 Sq.Mtr 16230.00 ₹

operated indoor type cubical panel board having IP-64 protection made from

14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary supporting angles, flats

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, with suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size(A) The

standard companies switch gear shall be used and only manufacturers at CPRI

approved factory and shall be certified by that company whose switch gears are

used after fabrication for beneficial use (i) with 350 mm depth board

182 Providing , erecting , fabricating the M.S. structure as per requirement on site 120.00 Kg. 77.00 ₹

incorporating proper size of M.S. angles, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted with one coat of red

oxide with erection on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing complete.

183 Supplying and erecting approved make panel mounting type Digital Voltmeter 2.00 Nos. 1263.00 ₹

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

184 Supplying and erecting approved make panel mounting type Digital Ammeter 2.00 Nos. 1543.00 ₹

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC , erected on existing panel board with

all connection, wiring etc .with manufacturers calibration certificate.

185 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 4.00 Nos. 314.00 ₹

Supply 500 V on existing panel board with necessary connections.

186 Supplying and erecting approved make set of indicator lamps of LED type lamp, 6.00 Nos. 43.00 ₹

lens cover, Bakelite holder complete erected with necessary connections.

187 Cable Terminal ( ‘Plain" Type)Set of Four for (i)32 / 12.00 EA 383.00 ₹

189 Supplying & erecting following spare parts for panel mounting Switch 2.00 EA 416.00 ₹

Disconnector Fuse Units Operational Handle Assembly Complete for(i) 32 / 63 /

190 Operating Shaft (Extensible) for (i) 32 / 63 / 125 Amps 2.00 EA 111.00 ₹

191 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. 10.00 Nos. 365.00 ₹

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire.

192 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 30.00 Kg. 787.00 ₹

193 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 40.00 Kg. 77.00 ₹

194 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 300.00 Mtr. 125.00 ₹

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables(i)4 core 6 Sq. mm

195 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 100.00 Mtr. 218.00 ₹

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A-1) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core)

Item.No Description of Item Qty. Unit Rate Amount

196 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 4.00 Nos. 75.00 ₹

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm

197 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 60.00 Nos. 38.00 ₹

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.(c) 2 to 4 core 6 Sq. mm

198 Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 480.00 Nos. 6.00 ₹

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

200 Providing & laying approved make Double walled corrugated pipes (DWC) of 400.00 Mtr. 62.00 ₹

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to make ground as per

original.(a)50 mm dia.

201 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 12.00 Nos. 1929.00 ₹

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make

shall be approved by Engineer in charge))

202 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 24.00 Mtr. 107.00 ₹

down rod erected duly painted for fan complete with necessary 24/ O.20,

core flexible wire with earthing.

203 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 24.00 Nos. 107.00 ₹

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary

204 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 24.00 Ea. 18.00 ₹

205 Supplying & erecting approved make low noise decorative exhaust fan having 8.00 Nos. 1687.00 ₹

size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers &

206 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 54.00 Nos 751.00 ₹

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics

with company mark/name 120 to 300 V, Power Factor more than 0.9, THD <

%, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency>

lumens/watt, LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(A) Tube

Light with integral/ non-integral driver (d) 22-24 Watts, Surge - 2KV,IP-20,

207 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 80.00 Nos 751.00 ₹

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics

with company mark/name 120 to 300 V, Power Factor more than 0.9, THD <

%, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency>

lumens/watt, LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(C) LED

Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete, (C) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20(C)

22-24 watts, Surge-2 KVCat-III

208 (F) Spot Light 425 Lumens, Surge-2KV(b) 8 to 11 WattsCat III 34.00 Nos 1354.00 ₹

Item.No Description of Item Qty. Unit Rate Amount

209 Supplying and erecting LED street light / Flood light fittings with High power 12.00 Nos 4948.00 ₹

White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and 10 kv non integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for 440VAC line supply.(e) above

to 60 WattsCat-III

210 Providing and erecting street light pole bracket comprising main B Class MS 16.00 Ea. 556.00 ₹

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size

pole top having sufficient fasteners for fixing the brackets and having spread of

1 mtr. length with suitable rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint. paint with following

nos of arms.[A] Single Arm bracket 1 Mtr

211 [B] Double Arm Bracket 1 Mtr 10.00 Ea. 751.00 ₹

212 Supplying and erecting approved make Octagonal pole made from HR sheet 26.00 Ea. 6806.00 ₹

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633 /4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected on foundation

as per details given by manufacturer considering site requirement.( C ) 5 Mtr.

Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long J-Bolt.

213 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom 26.00 Ea. 801.00 ₹

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Item.No Description of Item Qty. Unit Rate Amount

214 Supplying & erecting approved make Digital time switch having lithium cell 6 2.00 Ea. 3137.00 ₹

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

215 Supplying & erecting power contactor ,AC3 duty for time switch complete 2.00 Ea. 2755.00 ₹

erected as per direction Cat III [D] 4 pole 440V 40 Amp.

216 Making trench in soft soil of suitable width of 90 cms deep for laying cable or 1200.00 Mtr. 55.00 ₹

locating the fault all over the run and backfilling the same and making the

surface as normal ground.

217 Supplying & erecting approved make motor control cubical panel [Star delta] 4.00 EA 7179.00 ₹

made from 16G CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)

main fuses. Digital volt and current meter (in a single unit) with micro controller

based control unit and current sensing single phasing preventer electronic

overload protection, over voltage (Programmable) protection and under voltage

(Programmable) protection, prod less dry run protection programming facility

for setting of all parameter like overload current, high voltage limit, low voltage

limit, dry run limit with digital indication on seven segment LED display for any

fault like over load, high voltage, low voltage, dry running single crimped,

electronic star delta timer, feather touch start / stop push buttons to be erected

on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens,

BCH make only) (a) DOL up to 5.0 H.P.

218 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 400.00 Mtr. 145.00 ₹

Submersible copper cable approved make of following Size. (c) 3 Core x 4 Sq.

219 Providing & Erecting 3mm thick acrylic Sheet with grooving as directed 5000.00 Sq. Inch. 3.00 ₹

220 Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or 20.00 EA 111.00 ₹

Heavy duty PVC box erected flushed on wall or concealed in wall with

necessary plastering & finishing as directed of following size.(d) 250 mm x

221 Supply, Installation, Testing And Commissioning of 12U RACK with FAN, PDU (- 2.00 EA 5500.00 ₹

NWR-9U-5045-GR)

222 Supply, Installation, Testing And Commissioning of 24 port Patch Panel 2.00 EA 3100.00 ₹

223 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift 1.00 Ea. 1036486.00 ₹

having following main features:[1] GEAR LESS LIFT DRIVE comprising of High

Starting torque Lift 3 phase 440 V

A. C. Permanent Magnet Synchronous motor of proper rating with high

efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN

hall stops, Main, Up/ Down Contactor with overload and phase reversal relay

and safety controls.[3] Car with M S platform with bracings of adequate size

and to sustain the impact load cabin + passenger with safety factor of fire for

steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling

will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car

flooring shall be of anti skid PVC with choice of colour of engineer in charge. Car

doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with

emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail

language as per lift act.[4] All landing doors must be fire rated for 2 hour shall

be fully automatic centre opening/ telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared curtains with Unlocking facility

Item.No Description of Item Qty. Unit Rate Amount

[5] Appropriate battery operated emergency light in the car along with alarm

switch shall be provided. Also, Emergency Light & Fan should start immediately

without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger

capacity with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided

such that doors kept open till excess load is removed.[10] Spring buffers/PU

Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be

provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual

site parameters and submission of calibration certificate submission, door key

holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey

ladder for lift pit should be provided by the lift agency, along with the other

steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost,

where ever required as / if directed by engineer in charge.[17] Permanent

wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug

points shall be provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room. Necessary Earthing as per

Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without

any extra cost. (granite/marble fixing around all landing door openings are not

in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison

services for obtaining all necessary permission from lift inspector and other

Item.No Description of Item Qty. Unit Rate Amount

[20] acrylic transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act

lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and provide

report by third party authorized by concern licensing authority 5.agency has

to provide third party insurance upto completion of free maintenance period

and submit the document for the same.[21] Car Panel Operating Buttons with

floor position indicator/buttons must be of Auto Glow type clearly visible when

view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish

steel grade of 304 should be provided at appropriate height on the Rear & Side

Wall Panels in Lift Car.

4/5/6 Passengers, Ground plus 2 upper floors with Rated Speed of 1.0 m/sec.

(B) With General Specification attached herewith. Cat.III

224 Supplying & erecting approved make Lift Announcing solid state system in the 1.00 Ea. 16950.00 ₹

Passenger/ Stretcher lifts having AC2/ACVV/ACVF drives & automatic doors

only. The system comprising following features & facilities.

(i) Announcing floor message, message to close period.(ii) Announcing

‘Emergency Message’ when lift is stuck between floors due to power failure or

any other reason.

(iii) Instrumental Music between floor announcing.(iv) Announcement in English

/ Hindi & Gujarati Languages..

(v) Flexible to accommodate special per-programmed message such as name of

the building /office.(vi)Volume adjustment control

225 Providing & erecting approved make overload non-start feature & overload 1.00 Ea. 32205.00 ₹

warning Indicator system in the lift with making use of sound isolated floating

platform & micro switches on SI frame to get sensation of live load inside lift

cage at any given moment, with provides new fixtures of overload warning

inside lift cage with new relay in the existing control panel to activate ‘Overload

Non-Start Function with carrying out additional wiring including laying of new

travelling cable, include minor civil work & without changing the existing

capacity speed stops, travel & operation of the desired lift

226 Providing fitting & fixing fully glazed/ partly glazed double leaf anodised 17.00 Sq Mt 11150.00 ₹

aluminium entrance door using extruded section fabricated by standard

manufactures with framing 10.15cm x4.45cm rectangular section & door

shutter made from 10.15 cm x 4.45cm aluminium bottom section top & vertical

section 6.35x3.80cm size using 5.5mm thick "Triveni"or HB4 smoke glass with

glazing deep rubber gasket with locking arrangement(Godrej type) with all

fixtures & fastenings of anodised section with aluminium bedding floor spring

mounted double door closer with all labours & materials etc. Complete as per

drawing and as directed by E.I.C..Item also includes powder coating to

alluminium sections of approved colour / shade incl. all materials,labour,tools &

tackles etc. complete.

227 FULL HEIGHT PARTITIONS above 2100mm. height. 40.00 Sq Mt 4650.85 ₹

'Providing and fixing Aluminum partitions of minimum 80mmthickness

having framework of 1.2mm thick aluminium extruded section and

removable tile base system including necessary wire management system as

per specification & as directed by E-I-C.

Item.No Description of Item Qty. Unit Rate Amount

228 Providing and fixing 35mm thick both side laminated water proof flush door 55.00 Sq Mt 4596.00 ₹

shuttersof archid/anchor/green ply make including firstclass hardwood and

cross band,block board core with plywood face panels,12mm thick batten

pattiall around the shutter,1mm thick. Door skin laminate sheet on both side

including (A) SS finish fixtures1) S.S. Hinges (4" x 1")-4NO (2) SS stoper 20 cm

long -1no (3) S.S. Aldrops 25 cm long -1nos (4) fancy SS Handle 15 cm-2nos .

(All nos of fixtures are for one shutter )& Fevicol, screw, nail, tap,including

providing and applying prime coat Asian /Berger make and two coats of oil

painting of Asian /Berger make to the edges etc.complete as per detail drawings

and as directed by E.I.C

229 Providing fitting & fixing fully glazed/ partly glazed double leaf anodised 30.00 Sq Mt 7800.00 ₹

aluminium entrance door using extruded section fabricated by standard

manufactures with framing 10.15cm x4.45cm rectangular section with

minimum Thickness 1.95mm & door shutter made from 10.15 cm x 4.45cm

aluminium top / bottom section,Lock rail mimimum 15.0cmx4.45cm & vertical

section 4.70 x 4.45 cm size with minimum Thickness 1.95mm using 5.5mm

thick "Triveni"or HB4 smoke glass with glazing deep rubber gasket with locking

arrangement(Godrej type) with all fixtures & fastenings of anodised section

with aluminium bedding, hydraulic door closer with all labours & materials etc.

Complete as per drawing and as directed by E.I.C..Item also includes powder

coating to alluminium sections of approved colour / shade incl. all

materials,labour,tools & tackles etc. complete.

230 Supplying, Providing & fixing work surface for staff tables made of 32.00 Sq Mt 4401.69 ₹

25mm Pre-laminated MDF Board with one side Pre-lamination and on other

side 0.7mm thick lamination as per specification & as directed by E-I-C. The top

is provided and fitted with all KD joinery and fittings complete. The table

tops in workstations/ cubicles should be mounted with necessary brackets like

end support, corner, cantilevered as per the requirement of layout. The

entire table top should be provided with gable ends & the gable ends should

be attached to the partitions and table with the help of necessary brackets as

directed by EIC.

231 Supplying, Providing & fixing Keyboard tray as per specification and directed by E-I-C.36.00 Nos 1550.00 ₹

232 LOW HEIGHT PARTITIONS OF 1200 MM TO 1650MM HEIGHT. Providing and 90.00 Sq Mt 4650.85 ₹

fixing Aluminum partitions of minimum 80mm thickness having framework of

1.2 mm thick aluminium extruded section and removable tile base system

including necessary wire management system as per specification & as directed

233 Supplying, Providing and fixing in position standard table having top surface of 8.00 No 22348.70 ₹

minimum 25mm thick Pre-Laminated MDF Board with one side Pre-lamination

and on other side 0.7mm thick lamination as per specification & as directed by

E-I-C, having necessary provision for wire management data / computer /

telephone cabling. Table having drawer unit of size 400 x 450 X 600mm as per

the specification and design approved by Engineer-in-charge. All supporting

system should be matching with modular partition framing & final finish.

Rate is inclusive of KeyBoard tray & CPU trolley as required.. size 1500 x 750 x

234 GYPSUM CEILLING Pro.And single layer water proof gypsum board 12.5mm 450.00 Sq Mt 600.94 ₹

thick sections using waterproof board of size 1220mmx1830mmx8.0mm

suspended by GI suspender channel of size 25mmx3mm with intermediate

channel of size 18mmx40mmx0.8mm at 1220mm center to center ceiling

section of size 40mmx35mmx0.55mm at 457m c/c and perimeter channel A of

size 20mmx27mmx30mmx0.5mm at edges & drops incl. paper tapsands of it

cleat,anchor fastener, scoch bolt connecting cleat, joining compound to pcoat

on ceiling incl. making necy. opening for light fitting, diffuser etc. comp. as per

detail drawing as directed

Item.No Description of Item Qty. Unit Rate Amount

235 Supplying, Providing and fixing in position standard table having top surface of 2.00 No 23755.54 ₹

minimum 25mm thick Pre-Laminated MDF Board with one side Pre-lamination

and on other side 0.7mm thick lamination as per specification & as directed by

E-I-C, having necessary provision for wire management data / computer /

telephone cabling. Table having drawer unit of size 400 x 450 X 600mm as per

the specification and design approved by Engineer-in-charge. All supporting

system should be matching with modular partition framing & final finish.

Rate is inclusive of KeyBoard tray & CPU trolley as required.. size 1800 x 900 x

236 Supplying, Providing & fixing side & back Storage cabinet having Clear 75.00 Sq Mt 13977.97 ₹

inside storable space minimum of 380mm depth. It Should be made from

18mm Pre-Laminated MDF Board with one side Pre-lamination and on other

side 0.7mm thick Laminate as per specification and as directed by the E-I-C.

237 Providing and fixing curtain (Cotton fabrics + suppot cotton cloth) with 110.00 Sq Mt 1500.00 ₹

Aluminum rod of dia 40 to 50mm dia with SS rings.

238 P/F Mechanical double face movable unit of 900mm deep including all 110.00 smt 17663.00 ₹

materials by using 22 SWG mm thick C.R.C.A. steel sheet, 30mm solid round

guide channel press fit in to cold formed 'U' channel made from 14G Thick

material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms

with central hub, 10 lever central locking arrangement, Individual unit lock

system & stoppers, Indexing arrangement made of acrylic sheet for numbering

Powder coating on metal sheet for anti-rust treatment & finishing.

239 P/F Mechanical single faced fixed unit of 450mm deep including all materials 50.00 smt 10094.00 ₹

by using 22 SWG mm thick C.R.C.A. steel sheet, 30mm solid round guide

channel press fit in to cold formed 'U' channel made from 14G Thick material,

nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size, Anti tilt

arrangement on rear side of unit, driving wheel of 3 inseratble arms with

central hub, 10 lever central locking arrangement, Individual unit lock system &

stoppers, Indexing arrangement made of acrylic sheet for numbering and

Powder coating on metal sheet for anti-rust treatment & finishing.

240 P/F Mechanical single face mechanical unit of 450mm deep including all 50.00 Smt 12062.00 ₹

materials by using 22 SWG mm thick C.R.C.A. steel sheet, 30mm solid round

guide channel press fit in to cold formed 'U' channel made from 14G Thick

material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms

with central hub, 10 lever central locking arrangement, Individual unit lock

system & stoppers, Indexing arrangement made of acrylic sheet for numbering

Powder coating on metal sheet for anti-rust treatment & finishing.

Item.No Description of Item Qty. Unit Rate Amount

241 HIGH BACK CHAIR Providing & Fixing High Back Chair of Overall size- 2.00 No 15000.00 ₹

761W*761D*1127-1302H*431-531SH mm SYNTHETIC LEATHER SEAT/BACK

ASSEMBLY:The Cushioned seat is made of Injection molded Plastic outer &

inner. Plastic Inner is upholstered with leatherette and moulded High Resilience

(HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as

per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. The

Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube

of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette.*HIGH

BACK SIZE: 47.7 cm. (W) x 76.4 cm. The armrest top is moulded from

polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest

support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having

chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is

designed with the following features:• 360' revolving type. • Front-pivot for tilt

with feet resting on ground and continuous lumbar support ensuring more

comfort. • Tilt tension adjustment can be operated in seating position. • 5-

position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back

tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium

black powder coated. Seat depth adjustment is integrated in the seat through a

sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. Back Frame is

connected to the Up/Dn mechanism housed in Plastic T spine. It can be

adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit

individual need. The pneumatic ht adjustment has an adjustment stroke of

10.0±0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and

fitted with 5 nos. twin wheel castors.

Twin wheel castors are injection moulded in plastic having 6.0±0.1 cm wheel

Diameter and assembled to pedestal.The pedestal is 65.0 ± 0.5cm. pitch-center

dia.(75.0 ± 1.0cm. With castors.)Twin wheel castors are injection moulded in

plastic having 6.0±0.1 cm wheel Diameter and assembled to pedestal.The

rate shall include all materials, hardware and labour etc. complete as per

instruction of engineer-in charge and consultant. Approved Make: Godrej /

Herman Miller / Haworth / Knoll.

242 MEDIUM BACK CHAIR Providing & Fixing Mid Back Chair of Overall size- 48.00 No 10000.00 ₹

761W*761D*965-1140H*431-531SH mm SYNTHETIC LEATHER SEAT/BACK

ASSEMBLY:The Cushioned seat is made of Injection molded Plastic outer &

inner. Plastic Inner is upholstered with leatherette and moulded High Resilience

(HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as

per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. The

Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube

of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette.MID

BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) The armrest top is moulded from

polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest

support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having

chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is

designed with the following features:• 360' revolving type. • Front-pivot for tilt

with feet resting on ground and continuous lumbar support ensuring more

comfort. • Tilt tension adjustment can be operated in seating position. • 5-

position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back

tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium

black powder coated. Seat depth adjustment is integrated in the seat through a

sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. Back Frame is

connected to the Up/Dn mechanism housed in Plastic T spine. It can be

adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit

individual need. The pneumatic ht adjustment has an adjustment stroke of

10.0±0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and

fitted with 5 nos. twin wheel castors.

Item.No Description of Item Qty. Unit Rate Amount

Twin wheel castors are injection moulded in plastic having 6.0±0.1 cm wheel

Diameter and assembled to pedestal.The pedestal is 65.0 ± 0.5cm. pitch-center

dia.(75.0 ± 1.0cm. With castors.) Twin wheel castors are injection moulded in

plastic having 6.0±0.1 cm wheel Diameter and assembled to pedestal.The

rate shall include all materials, hardware and labour etc. complete as per

instruction of engineer-in charge and consultant. Approved Make: Godrej /

Herman Miller / Haworth / Knoll. Synchro mechanism with single,position

locking arrangement,Adjustable arms with PP pad, Powder coated black sigma

Item.No Description of Item Qty. Unit Rate Amount

243 LAW BACK CHAIR/NON REVOLVING VISITOR CHAIR. Providing & Fixing Visitor 21.00 No 6000.00 ₹

Back Chair of Overall size- 550W*580D*840H*450SH mm Cushion Chair :The

seat and back are made up of 1.2 ±0.1em. thick hot pressed plywood measured

as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric

and moulded Polyurethane foam with PVC lipping all around. The back foam is

designed with contoured lumbar support for extra comfort..(LOW BACK) SIZE:

49.5cm. (W) X 45.5cm. (H)*SEATSIZE: 49.5cm.(W)X 43.0cm. (D) The HR

polyurethane foam is moulded with density =4S+/-2 kg/m3and hardness load

16 ± 2 kgf as per IS:7888 for 2S% compression.The one-piece armrests made of

black integral skin polyurethane with SO-70Shore Hardness and reinforced with

M.S. insert. The armrests are scratch and weather resistant. The armrests are

fitted to the seat with seat armrest connecting bracket made of 0.3 ±0.022cm.

thk. HR steel.The understructure is made of 02.S4±0;03cm. x 0.2 ±0.016cm.thk.,

M.S;E.R.W. tube and black powder coated ( DFT 40-60 microns).The rate shall

include all materials, hardware and labour etc. complete as per instruction of

engineer-in charge and consultant.

244 36.00 & Providing

Supplying, Providing & fixing CPU trolley as per specification and directed by E-I-C.Supplying, No & fixing1400.00 ₹ specification

Keyboard tray as per 50,400.00 and di

245 Supplying, Providing & fixing Pedestal unit below work station top surface having 72.00 No

minimum size of 400mm x

height made up of eq

246 Providing & fixing steel cupboard shutter of 18 gauge with steel frame and 72.00 Sq Mt 3114.00 ₹

fixing the frame with brick masonry including locking arrangement with 3 coats

of approved oil paint etc., complete.

247 Supplying,providing and arranging in posio n wooden sofa made with minimum 3.00 No 17400.00 ₹

19mm.ply structure and internal frame work made of C.P teak/marandi wood

seat made with minimum 19 mm ply and cushion made with foam

100mm.thick,32 density on seat covered with 14mm.thick 18 density form,back

made with wooden frame of minimum 50mm*40mm with 4mm ply and

covered with foam 150mm,32 density with 18 density 14 mm thick foam for

back extra support to the shape all foam of seat and back covered with tapestry

etc.as per specic ao n and as approved by E-I-Charge.clear inside length of

running feet for three seater sofa.

248 Providing & fixing UGVCL LED logo consisting & using 3mm acrylic sheet letters 20.00 Sq. Feet 1200.00 ₹

as per design, letter back side of 3mm ACP sheet & 2.5" Channel Emboss'

Sunsign LED module with 5 years' warranty), waterproff power supply module

with 03 years' guarantee, 1.5 mm ISI company cable wiring.---For New UGVCL

Logo With LED Letter - Total - (5 x 4) = 20 Sq. Ft.

249 Supplying and Installing SS Letter "UTTAR GUJRAT VIJ COMPANY LIMITED' 1.00 No 101500.00 ₹

'MEHSANA TOWN & RULAR SUB DIVISION OFFICE'. having letter size 30" LED

Light letter, item consist of all material and labour charge.

250 Providing & fixing UGVCL Without LED logo consisting & using 3mm acrylic 15.00 Sq. Feet 1000.00 ₹

sheet letters as per design, letter back side of 3mm ACP sheet & 2.5" Channel

Emboss'---For New UGVCL Without LED LOGO Letter - Total - (5 x 4) = 20 Sq.

251 Diesel engine driven fire pump of verticale turbine type with mechanical seal, 1.00 No 429250.00 ₹

deisel engine of required capacity, diesel tank of 200 ltr (complete with level

indicator, diesel filling point, diesel overflow point, overflow tray with

collection arrangement, support etc.), battery, battery charger, foundation

for engine, fuel piping (copper), exhaust system, insulation for exhaust

system etc complete in all respect as per NBC/IS standard and

specification. Pump shall be supplied with strainer mess at suction. Capacity

:900LPM @ 65 Mtr head Depth of suction of pump from pump bottom :

3000 mm MAKE : LUBI/KIRLOSKAR/WILO

Item.No Description of Item Qty. Unit Rate Amount

252 Supply and installation, testing and commissioning of 1.00 No 111864.41 ₹

COMMON control panel for fire fighting system consisting of electrical mortar

driven 60HP main fire pump, Jokey pump and 12.5 Hp consisting of the

following. INCOMING: 1no. set of phase inducing lamps with SFU rate 350 A

1no set of 400 Amps. TPNE Ai, bus bars 1no. 0-400 Amps. Ammeter. 1no. 0-600

V voltmeter with phase selector switch, isolating switch 400 A outgoing for

main electrical pump: 1 no 200 amps MCB 1 no. S/D starter suitable for 60 hp

no. single phase preventer suitable for the pump described for 60HP 1 no.

single phase preventer suitable for the pump described above 1 no. set on./off

indicating lamps, 1 no. auto manual selector switch outgoing for jokey pump

1no. 50 amps MCB 1 no. dol starter suitable for 12.50 hp 1no, single phase

preventer suitable for the pump described above 1 no. set of on/off indicating

lamps 1 no. auto manual selector switch ENGINE control selection no.1 diesel

engine for stand by pump:a) Main switch 2 pole on/off -1 no.b) Battery charger

with transformer with rectifier resistance DC ammeter, DC voltmeter, T/B

selector switch -1 set

c) Indicating lamps for fault communication ( Battery charger supply on, control

on , engine running, low oil.

253 Providing & fixing submersible pump having 2.00 HP motor of ISI brand of 2.00 No 18800.00 ₹

CRI/Lubi or equivalent with all G.I. fittings for inlet & outlet connection with

electrical pannal, require cable etc complete as directed.

254 Supplying. Installatiuon , Testing& Commissioning of Jockey Fire Pump suitable 1.00 No 41400.00 ₹

for automatic operation & consisting Of Following Horizontal Type , centrifugal

end suction pump of cast iren body & CI impeller , mechnical seal to ensure a

minimun pressure of 3.5 kg/ sq. cm. at highest & fastest outlet aT specified flow

of 1620 LPM 554 M head conformin g to IS 1520 with M>S. febricated common

base plate , coupling, coupling Gaurd , foundation bolts etc. as required. MAKE :

Estimated Cost = A

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C

E Total including Welfare Cess ----- D = C + D -------------------------------

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by

UGVCL on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly,

I/We am/are willing to carry out the work at quated rate as above.

SIGNATURE OF CONTRACTOR Chief Engineer (Operation)

(With rubber stamp/seal of the company) UGVCL R.O. MEHSANA