REPAIRS/ MAINT OF INTERNAL ELECTRIFICATION SERVICES, WATER SUPPLY INSTALLATIONS AND ALLIED WORKS AT SEC-09, SEC-17 GNR AND COMN FLT AHMEDABAD UNDER GE (AF) CHILODA

Amount

Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder, regulators, sockets light fittings etc, removing material to store for keeping in safe custody or for taking credit, and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100 V grade drawn through and incl PVC casing in capping/ conduit with accessories like bends tees, junction boxes etc. fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLS cable 1100 V grade as earth continuity wire incl sunken type pressed steel terminal boxes of size with 3.0 mm thick bakelite steel white/ coloured top cover for one light point controlled by one switch complete all as specified and as directed.

All as per Item No. 2 above but one fan point controlled by one switch complete.

All as per Item No. 2 above but one 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 2 above but one 3 Pin socket out let 5 Amps on the same board.

All as per Item No. 2 above but one bell point controlled by one switch.

All as per Item No. 2 above but with cable of size 2.5 Sqmm PVC insulated on independent board for power plug 15 Amps.

S&F switch piano type 230 Volts, 5 Amps, single pole complete all as specified and as directed.

S&F socket out let 2 in 1, 3 pin, 5 Amps flush type 230 Volts complete all as specified and as directed.

S&F switch socket combination (Box type) universal 2 in 1, 6 pin, 5 and 15 Amps flush type complete all as specified and as directed.

S&F switch socket combination (Box type) universal 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F bell push, 5 Amps, flush type complete all as specified and as directed.

S&F ding dong bell, AC, 230 V complete all as specified and as directed.

S&F coard less bell of different music, AC, 230 V complete all as specified and as directed.

S&F ceiling rose, 3 terminal/ poly carbonate, isolated body complete all as specified and as directed.

S&F lamp holder, insulated body with back plate for battern fitting complete all as specified and as directed.

S&F 3 pin plug top 6 A, 240 V complete all as specified and as directed.

S&F 3 pin plug top 16 A, 240 V complete all as specified and as directed.

S&F modular switch one way 6 A,1 module complete all as specified and as directed.

S&F modular switch one way 16 A,1 Module complete all as specified and as directed.

S&F modular bell push 6 A,1 Module complete all as specified and as directed.

S&F modular socket 6/10 A, 2/ 3 pin combined 2 module complete all as specified and as directed.

S&F modular socket 16/15 A, 2/3 pin combined 2 module complete all as specified and as directed.

S&F modular fan regulator, 120 W, 2 module complete all as specified and as directed.

S&F white cover plate with frame, 1 module complete all as specified and as directed.

S&F white cover plate with frame, 2 module complete all as specified and as directed.

S&F white cover plate with frame, 3 module complete all as specified and as directed.

S&F white cover plate with frame, 4 module complete all as specified and as directed.

S&F white cover plate with frame, 6 module complete all as specified and as directed.

S&F white cover plate with frame, 8 module complete all as specified and as directed.

S&F modular metal flush box, 3 module complete all as specified and as directed.

S&F modular metal flush box, 4 module complete all as specified and as directed.

S&F modular metal flush box, 6 module complete all as specified and as directed.

S&F modular switch socket combination (Box type) 6 A, 5 pin, 3 module complete all as specified and as directed.

S&F modular switch socket combination (Box type) 16 A, 6 pin, 3 module complete all as specified and as directed.

M&L in repair/ replacement for sub main wiring complete with two run of 6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/ casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and including sunken type pressed steel terminal boxes with 3mm thick bakelite white/ coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly complete all as specified and as directed. Note:- Two run of 6 Sqmm cable including one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length.

M&L in repair/ replacement for submain wiring complete with PVC insulated cable of single core 4.0 Sqmm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing - capping with accessories including 4.0 Sqmm unsheathed multi stranded copper conductor as on earth wire complete all as specified and as directed. Note:- Two runs of single core cable with one run of earth continuity cable including PVC casing-capping and its accessories will be measured and paid as one length.

S&F PVC insulated unsheathed multi stranded copper conductor single core of capacity 1.5 Sqmm FRLS cable complete all as specified and as directed.

S&F PVC insulated unsheathed multi stranded copper conductor single core of capacity 2.5 Sqmm FRLS cable complete all as specified and as directed.

S&F casing capping patti suitable for 3 Core, 1.5 Sqmm/ 2.5 Sqmm wire complete all as specified and as directed.

Taking down old unserviceable sheet metal enclosure and S&F sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links (without MCB's) 4 ways TPN complete all as specified and as directed.

S&F in repairs sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links (without MCB's) 12 ways SPN complete all as specified and as directed.

All as per Item No. 42 above but 8 way.

All as per Item No. 42 above but 4 way.

All as per Item No. 42 above but 2 way, single door.

Taking down old unserviceable sheet metal enclosure and S&F factory made single pole and neutral sheet metal enclosure with a two pin socket plug and socket with one single pole MCB 240 Volts, 20 Amps, capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, TPN, 240 Volts, 63 Amps capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, TPN, 240 Volts, 40 Amps capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, SPN, 240 Volts, 40 Amps capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, SPN, 240 Volts, 5-32 Amps capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, single pole, 240 Volts capacity, 5 Amps to 32 Amps current rating, 10 KA breaking capacity complete all as specified and as directed by Engineer-in-Charge.

S&F blanking plate complete all as specified and as directed by Engineer-in-Charge.

S&F residual current circuit breaker (RCCB)/ ELCB of DP of capacity 63 Amps complete all as specified and as directed by Engineer-in-Charge.

S&F residual current circuit breaker (RCCB)/ ELCB of DP of capacity 32 Amps complete all as specified and as directed by Engineer-in-Charge.

S&F isoator 4 pole, 100 Amps, 415 Volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

S&F Isolator 4 pole, 63 Amps, 415 Volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

S&F LED tube light fittings 1x9 Watts, 230 Volts surface and wall mounted LED type and including connection up with twin core twisted flexible copper conductior cable of size 1.5 Sqmm complete all as specified and as directed.

S&F LED tube light fittings 1x22 Watts, 230 Volts surface and wall mounted LED type and including connection up with twin core twisted flexible copper conductior cable of size 1.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F Maxo LED batten for T8 LED Retro lamp 20 Watts, single side connection 230 Volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F MAXO LED (Tube) T8 LED Retro lamp 20 Watts, single side connection 230 Volts complete all as specified and as directed by Engineer-in-Charge.

S&F 36 W, LED 2x2 size new generation, aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LED as light source, suitable Armstrong/ Grid ceiling complete with separate electronic driver complete all as specified and as directed by Engineer-in-Charge.

S&F new generation, IP-65, energy saving, long life aesthetically designed aluminium landscape luminaire for diffuser lighting with high power LED bollard lights 8/ 9W including fittings and all connection complete all as specified and as directed by Engineer-in-Charge.

S&F mustroom type LED bollard light 13 W, IP-54, 5700K energy saving, long life, landscape luminaire for diffuser lighting with high power LED bollard lights including fittings and all connection complete all as specified and as directed by Engineer-in-Charge.

S&F inverted pyramid tripod type LED bollard lights with soft 360 degree light distribution including fittings and all connection complete all as specified and as directed by Engineer-in-Charge.

S&F recess mounted circular LED slim fit low profile down lighter of capacity 6 Watt with all connection complete all as specified and as directed by Engineer-in-Charge.

S&F recess mounted 6 W LED new innova neo swivel spotlight round shaped downlighter low ceiling height cool white Ecco light with all connection complete all as specified and as directed.

S&F recess mounted 15 W LED slim compact aluminium die cast edge lit octane LED panel round shaped downlighter low ceiling height Ecco light with driver and all connection complete all as specified and as directed.

S&F recess mounted LED sparkle pro snoot, wall washer light, tilted 70 digree out word and swivels 360 digree, energy saving, with all connection complete all as specified and as directed.

S&F energy saving IP 65 flood light luminaire 30 Watt with high power COB LED as light source complete all as specified and as directed.

S&F energy saving IP 65 flood light luminaire 50 Watt with high power COB LED as light source complete all as specified and as directed.

S&F ruby (clear) IP-65 15 Watts Post Top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and as directed.

S&F ruby (clear) IP-65 70 Watts Post Top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and as directed.

S&F flexion LED strip suitable for decorative 50 meter LED rope light, water proof, colour blue, white, yellow with adaptor, suitable for 180 Volt to 280 Volt complete all as specified and as directed.

S&F tube rod of cap 36 Watt suitable for existing fittings complete all as specified and as directed.

S&F tube rod of cap 28 Watt, T-5 type, 230 Volts complete all as specified and as directed.

S&F bulb retrofit type 10 Watt LED bulb minimum lumens 900, suitable for 180 Volt to 280 Volt complete all as specified and as directed.

S&F bulb retrofit type 15 Watt LED bulb minimum lumens 900, suitable for 180 Volt to 280 Volt complete all as specified and as directed.

S&F bulb retrofit type 20 Watt LED bulb minimum lumens 600, suitable for 180 Volt to 280 Volt complete all as specified and as directed.

S&F electronic ballast suitable for 1x28 Watts complete all as specified and as directed.

S&F electronic ballast suitable for 1x36 Watts complete all as specified and as directed.

Taking down ceiling fan/ cabin fan and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/ bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete (rewinding, bush, bearing, capacitor, twin core, flexible cable will be paid under relevant items) reassembling the ceiling fan complete after greasing, oiling, testing the same and making the fan serviceable of any sweep and re-hanging and connecting up to the ceiling rose complete all as specified and as directed.

All as per Item No. 81 above but for exhaust fan 300mm/ 380mm/ 450mm sweep, any type complete all as specified and as directed.

All as per Item No. 81 above but for wall fan 250mm/ 400mm sweep, any type complete all as specified and as directed.

M&L for re-winding of ceiling fan motor of any type and size including removing old burnt wire copper wire as per existing gauge and insulated paper, varnishing including cleaning/ greasing complete all as specified and as directed. Note:- Taking down and refixing of ceiling fan for winding, painting, replacement of bearing, bush, capacitor and alike will be measured and paid separately.

M&L for re-winding only of exhaust fan with required guage super enameled wire including varnishing, insulation, taping complete of 450mm sweep complete all as specified and as directed.

M&L for rewinding only of wall fan with required guage super enameled copper wire including varnishing, insulation, taping complete of 250mm/ 350mm sweep complete all as specified and as directed.

S&F in repair/ replacement of exhaust fan of size 250mm sweep silint type in PVC body as required at site complete all as specified and as directed by Engr-in-Charge.

S&F in repair/ replacement wall fan of size 400mm/ 450mm sweep in PVC body as required at site complete all as specified and as directed by Engr-in-Charge.

S&F capacitor for fan 2.5 MFD complete all as specified and as directed.

S&F capacitor for fan 3.15 MFD complete all as specified and as directed.

S&F electronic regulator switch type complete all as specified and as directed.

S&F electronic regulator socket type complete all as specified and as directed.

S&F cabin/ wall/ exhaust fan blade any sweep as existing complete all as specified and as directed.

S&F down rod 12mm dia made out of high density mild steel 600mm long as per approved sample complete all as specified and as directed.

All as per Item No. 94 above but 900mm long.

S&F capacitor of cap 50 MFD (+/-) 5% (YASHADA-4), suitable for submersible/ CG motor complete all as specified and as directed.

S&F in replacement of looping box (enclosures) made of PVC of size 300mm x 200mm x 155mm comprising of 02 Nos aluminium bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6/ 16 Amp with enclosure complete all as specified and as directed.

Supply only FR PVC electrical insulation tape of size 18mm x 9.0mtr x 0.125mm complete all as specified and as directed.

S&F in repairs MCCB 4 pole, 415 V, 100 Amps with breaking capacity 35 KA complete all as specified and as directed.

S&F in repairs MCCB 4 pole, 415 V, 63 Amps with breaking capacity 25 KA complete all as specified and as directed.

S&F in repairs thermostat of water heater for 25/ 50 Ltrs capacity, AC, 230 V complete all as specified and as directed. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repairs water heater heating element for 25/ 50 Ltrs capacity 1.5 KW/ 2.0 KW/ 2.5 KW/ 3.0 KW complete all as specified and as directed. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repairs flexible hot water pipe steel cover wire of length not less than 6 fit with washer for hot and cold water for geyser connection complete all as specified and as directed.

S&F in repairs flexible hot water pipe of length not less than 60 cm with washer for hot and cold water for geyser connection complete all as specified and as directed.

S&F Indicator lamp (red, green) including necessary connection in geyser capacity of 25/ 50 Ltrs complete all as specified and as directed by Engr-in-Charge. Note:- Rate quoted by tenderer is for each neon lamp.

S&F in repair/ replacement of geyser assembly 6 hole/ 9 hole of water heater for 25 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of geyser assembly 6 hole/ 9 hole of water heater for 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of geyser cover top/ bottom of water heater for 25/ 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of outer body of water heater for 25 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of outer body of water heater for 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of lower body of water heater for 25 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of lower body of water heater for 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of upper body of water heater for 25 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement of upper body of water heater for 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

S&F in repair/ replacement acoustic insulation wool of water heater for 25/ 50 Ltrs capacity AC 230 V complete all as specified and as directed by Eng-in-Charge. Make:- Theta/ Bajaj/ Danfoss as approved by GE.

M&L for cutting of existing steel tubing for alternations or additions of 15mm dia pipe line complete all as specified and as directed by Eng-in-Charge.

M&L for cutting of existing steel tubing for alternations or additions of 20mm dia pipe line complete all as specified and as directed by Eng-in-Charge.

M&L for cutting of existing steel tubing for alternations or additions of 25mm dia pipe line complete all as specified and as directed by Eng-in-Charge.

M&L for cutting of existing steel tubing for alternations or additions of 40/ 50mm dia pipe line complete all as specified and as directed by Eng-in-Charge.

Taking up or down from trenches/ wall/ floor/ ceiling, steel tubing of 80mm dia bore and connections, including for re-fixing or removing complete all as specified and as directed by Eng-in-Charge.

All as per Item No. 120 above but 50mm dia bore.

All as per Item No. 120 above but 40mm dia bore.

All as per Item No. 120 above but 25mm dia bore.

All as per Item No. 120 above but 20mm dia bore.

Supply and laying GI tubing 80mm dia bore, medium grade including GI fittings like sockets, elbows, bends, tees, unions, short pieces etc. laid in trench complete all as specified and as directed.

All as per Item No. 125 above but 50mm dia bore.

All as per Item No. 125 above but 40mm dia bore.

All as per Item No. 125 above but 25mm dia bore.

All as per Item No. 125 above but 20mm dia bore.

Supply and laying UPVC tubing of 40mm dia bore, medium grade, including UPVC fittings like sockets, elbows, bends, tees, unions, short pieces etc. laid in trench complete all as specified and as directed.

All as per Item No. 130 above but 25mm dia bore.

All as per Item No. 130 above but 20mm dia bore.

S&F in repair gun metal gate/ globe valve 15mm dia, heavy duty (ISI marked) with iron wheel head screwed both ends for iron pipe for the following bore of pipe including testing complete all as specified and as directed.

All as per Item No. 133 above but 20mm dia.

All as per Item No. 133 above but 25mm dia.

All as per Item No. 133 above but 40mm dia.

M&L for cleaning of UG sump of 20,000 gallons capacity by removing sludge/ sand/ dirt by means of manual/ by sludge removing pump, cleaning the sump with bleaching powder, drying and applying one coat of lime wash internally after washing with sodium hypochlorite solution complete all as specified and as directed by Engr-in-Charge. Note:- Date of cleaning should be marked on sump with suitable stencil.

All as per Item No. 137 above but 50,000 gallons capacity sump.

S&F in repair/ replacement of sluice valve of 100mm bore, class PN-1 type, duly ISI marked with iron wheel and head non raising spindle stainless steel conforming to IS : 14846 flanged ends including rubber joints and jointing material all as required at site complete all as specified and as directed by Engr-in-Charge.

S&F in repair/ replacement of sluice valve of 80mm bore, class PN-1 type, duly ISI marked with iron wheel and head non raising spindle stainless steel conforming to IS : 14846 flanged ends including rubber joints and jointing material all as required at site complete all as specified and as directed by Engr-in-Charge.

S&F in repair/ replacement of gun metal foot valve 100mm size with all accessary complete all as specified and as directed by Engr-in-Charge.

M&L for cast iron fittings for flanged pipes like bends, tapers, tee pieces (single & double branch) any type and angle/ radius and straight connecting pieces but all ends flanged upto dia 150mm bore complete all as specified and as directed.

S&F in replacement of old existing single phase preventer, 3 phase of type ESP-2, 415 Volt complete all as specified and as directed. Make:- Ellice or equivalent of Havells/ MDS/ CG/ L&T as approved by GE.

M&L for construction of 3.0mm thick MS sheet cover fixed on 40mm x 40mm x 6mm thick angle iron frame embedded in PCC coping with locking arrangement and mild steel surface with two coats of red oxide primer etc. complete all as shown on drawing complete all as specified and as directed.

M&L in repair for valve chamber type ‘C’ of inner size 900mm x 600mm x 1000mm with brick masonry built in CM (1:6) with MS cover 1.60mm thick and locking arrangement including excavation and earthwork in any type of soil, PCC (1:4:8) type D2 size for foundation, PCC coping in cement concrete (1:2:4) type B1, plastering 10mm thick in CM mortar (1:4) and applying one coat or red oxide primer and two coats of synthetic enamel paint on all steel surfaces complete all as specified and as directed and shown on drawing No. CEAA/TD/57 sheet No.1/1.

M&L for preparation of old painted surface of 80/ 100mm dia iron pipe and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for servicing of pressure pump 1 HP at site including taking down from existing place, checking of NRV, impeller, pressure switch, rubber diaphram, capacitor and bolt etc and refixing the same position and connecting complete all as specified and as directed by Engr-in-Charge. Note:- Spare parts as above mentioned shall be measured and paid separately.

S&F pressure switch PS-98 range 2.5-9.5 auto suitable to operation on 230 V, AC supply complete all as specified and as directed. Make:- Venus/ Bajaj/ Recold/ Havells/ L&T as approved by GE.

S&F in repairs non return valve of suitable size for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F in repairs tank 25/ 35 Ltr suitable for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F repairs impeller of suitable size for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F in repairs mechanical seal of suitable size for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F in repairs capacitor of suitable size for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F in repairs 5 way connector of suitable size for pressure pump of capacity 1.0 HP complete all as specified and as directed.

S&F in repairs non return gun metal valve 15mm brass both side threaded complete all as specified and as directed.

Dismantling, cleaning and over hauling centrifugal mono block pump set of 0.5 HP capacities including re-winding of motor with appropriate super enameled copper wire of existing gauge, replacement of bearing including all connection and testing complete all as directed and as specified.

All as per Item No. 156 above but 1.0 HP/ 2.0 HP.

M&L for preparation of old painted surface of mono block pump set of capacity 0.5 to 1.0 HP and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L in repair/ replacement of electric driven motor (mono block) 0.5 HP capacity up to 15.00 meter head single phase 230 V including necessary connection complete with suction/ delivery pipe of 15mm x 15mm bore complete all as specified and as directed. Make:- CG/ Kirloskar/ CRI as approved by GE.

All as per Item No. 159 above but 1.0 HP.

M&L for dismantling of centrifugal pump set 30 HP of make - Kirloskar at 42 Mtr head opening and replacement of following items including transporting of pump set to work shop all as directed. (a) Replacement of CI impeller as per existing size. (b) Replacement of EN-8 pump shaft complete with check put key. (c) Replacement of type C-40 pump casing bottom. (d) Replacement of gland packing plate. (e) Replacement of bearing housing CI complete. (f) Replacement of ball bearing 5309. (g) Replacement of planter ring. (h) Replacement of liquid deflector. (i) Replacement of shaft sleeve SS 410. (j) Replacement of set of key. (k) Replacement of lock washer for support foot. (l) Replacement of lock washer for impeller foot. (m) Replacement of grease nipple.

(n) Replacement of oil level sight glass. (o) Replacement of oil seal. (p) Replacement of gas kit set. (q) Replacement of plug set. (r) Replacement of fasteners. (s) Assembling of pump set complete and fixing in foundation and connecting with motor coupling and testing on full load complete all as specified and as directed by Engr-in-Charge. Note:- (i) The contractor will be responsible for maintaining the centrifugal pump in serviceable state for the entire contract period. (ii) Since the job involves major overhauling, no additional payment will be made to the contractor if servicing is required more than once during the currency of contract.

All as per Item No. 161 above, but of cap 25 HP complete.

All as per Item No. 161 above, but of cap 20 HP complete.

M&L for dismantaling and step opening to complete motor of cap 30 HP and segregated all serviceable parts and kept at site for resue including re-winding with supper enamled wire of suitable gauge complete and replaceing bushes, bearing check nut, and other required parts and barnishing the same including painting of motor, making serviceable to the motor complete and servicing, cleaning, greasing, overhauling, re-alingment with lock, key, nut, bolts, washers and reassembling the same with centrifugal pump after testing complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The contractor will be responsible for maintaining the centrifugal pump in serviceable state for the entire contract period. (ii) Since the job involves major overhauling, no additional payment will be made to the contractor if servicing is required more than once during the currency of contract.

All as per Item No. 164 above, but of cap 25 HP complete.

All as per Item No. 164 above, but of size 20 HP complete .

Dismantling and repair of centrifugal Monoblock pump set 15 HP of Make - Kirloskar, 44 Mtr head and opening and replacement of following items including transporting of pump set to work shop all as directed:- 1. Replacement of CI impeller as per existing size. 2. Replacement of EN-8 pump shaft complete with check put key. 3. Replacement of type C-40 pump casing bottom. 4. Replacement of gland packing plate. 5. Replacement of bearing housing CI complete. 6. Replacement of ball bearing Nos 5309. 7. Replacement of planter ring. 8. Replacement of liquid deflector. 9. Replacement of shaft sleeve SS 410.

10. Replacement of set of key. 11. Replacement of lock washer for support foot. 12. Replacement of lock washer for impeller foot. 13. Replacement of grease nipple. 14. Replacement of oil level sight glass. 15. Replacement of oil seal.16.Replacement of gasket set. 17. Replacement of plug set.18.Replacement of fasteners. Note:- (i) The contractor will be responsible for maintaining the centrifugal pump in serviceable state for the entire contract period. (ii) Since the job involves major overhauling, no additional payment will be made to the contractor if servicing is required more than once during the currency of contract.

M&L repair to submersible pumping set capacity 25 HP, 440 V, 3 Phase, discharged 510 LPM at 123 Metre head consisting of following:- Opening of submersible motor and cutting to burnt winding and cleaning to slots by cleaning and repair to damage starter etc. re-winding to submersible motor with suitable size of superior quality copper winding wire insulating materials all as directed by Engineer-in-Charge, replacement of thrust bearing – 01 No, replacement of bush – 02 Nos, Re-assembling and transporting to Pump House, lowering pump and testing complete.

Dismantling of submersible pump set all as directed and replacement of the following items - (i) Replacement of neck ring – 05 Nos, Replacement of brass bushes – 05 Nos, Replacement of shaft bush - 02 Nos, Replacement of impeller - 05 Nos complete all as specified and as directed. Note:- (i) The contractor will be responsible for maintaining the submersible pump in serviceable state for the entire contract period. (ii) Since the job involves major overhauling, no additional payment will be made to the contractor if servicing is required more than once during the currency of contract.

All as per Item No. 168 above but 20 HP capacity.

All as per Item No. 168 above but 15 HP capacity.

M&L for preparation of old painted surface of centrifugal pump set of capacity 20 HP and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling and repair of submersible monoblock pump set 5 HP/ 3.75 KW of Make:- Microprotect, 10 Mtr head and opening and replacement of following items including transporting of pump set to work shop all as directed:- 1. Replacement of CI impeller as per existing size. 2. Replacement of pump shaft complete with check put key. 3. Replacement of type C-40 pump casing bottom. 4. Replacement of gland packing plate. 5. Replacement of bearing housing CI complete. 6. Replacement of planter ring. 7. Replacement of shaft sleeve SS 410. 8. Replacement of oil seal. 9.Replacement of gasket set complete all as specified and as directed.

Note:- (i) The contractor will be responsible for maintaining the submerssible pump in serviceable state for the entire contract period. (ii) Since the job involves major overhauling, no additional payment will be made to the contractor if servicing is required more than once during the currency of contract.

Lowering and lifting of existing pump set and repaired pump set with taking out carefully of 18 Nos. column pipe of 80/ 150mm size each length of 3 mtr with flange joints repairing/ welding all as required at site to column pipe and including cable proper fixing with pump set and column pipe and making connection with existing starter all as required at site complete all as specified and as directed by Engr-in-Charge. Note:- Cost of flange type with jointing material like nuts, bolts, gasket sheet etc. shall be included in item rate quoted.

Supply and connect in repairs flat 3 Core copper conductor PVC insulated and PVC sheathed cable 1100 Volts grade of size 10 Sqmm laid in and including 40mm dia PVC conduit fixed to wall/ in duct laid in floor/ trench etc. complete all as specified and as directed.

Taking down old unserviceable float valve and S&F 25mm dia float valve complete all as directed by Engr-in-Charge.

M&L for installation sign/display board flex board type outdoor complete mounted on 20 mm size MS square tubing 6 mm thick marine plywood incl flat iron clamps & angle iron supports for grouting/fixing on walls complete including computer printing/inject printing of words/diagrams/emblems etc all as directed by Engr-in-Charge. Note:- The rate quoted for the above item is deemed to inclusive of fixing arrangements such as clamps, GI tubing etc complete to illuminate the sign board. The rate quoted for the above item is deemed to inclusive of fixing arrangements such as clamps, GI tubing etc complete to illuminate the sign board.

M&L for collection of water sample from borewell & getting then tested from Govt laboratry & furnishing test report, indicating chemical & bactrological analysis incl presrence of floride, TDS, LEAD contents if any complete all as specified and as directed by Engr-in-Charge.

S&F in repairs MS column pipe 100mm dia medium grade (heavy duty) flanged type including necessary fixing MS nut, bolt, washer & gaskets etc including groove for cable entry system of 3.0 mtr in length complete all as specified and as directed.

Supply only Calcium Hypochlorite 65% to 70% chlorine content in granular form (Calcium based Granular disinfectant for water treatment (Drinking water) for packed in 45 kg each drum complete all as specified and as directed. Note:- (i) The make of product shall be from approved list of E-in-Cs Branch/ Command approval list or any equivalent make subject to satisfactory test report. (ii) The contractor/ suppliers must submit the COC (Certificate of Compliance) in original from manufactures by All India Authorised MES Distributor for each batch of product delivered indicating including chemical analysis report by all India authorised MES Distributor.

ARTI CONSTRUCTION

Electromech Engineers

ALBA AC AND REF SERVICES

Bidder Name

Jinendra Chemicals