Ambalappuzha devaswom in Ambalappuzha group- Repairs and maintenance to the west side malika reg. RETENDER

Labour charges for cleaning the site including cutting small trees near pond , removing grass & creepers on west side of Maalika and removing waste materials in first floor, ground floor rooms

Dismantling and removing Mangalore tiles over roofs including ridges, hips, valley sheet, wind ties and boardening but excluding roof timbers and stacking materials within a distance of 150m

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimeters

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and abov

Supplying and fixing teak wood wrought and put up for roof members including cost and conveyance of materials etc complete

Supplying and fixing teak wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc complete

Supplying new MP roofing tiles 410x235 mm or nearest available size

Supplying new hip and ridge tiles 400mm or nearest available size

Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats)

Resetting with old and newly supplied first class MP tiles 410x235 mm or nearest available size

Resetting department MP hip ridge tiles of the 400 mm nearest available size in CM 1:4

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead: With cement mortar 1:4 ( 1 cement : fine sand)

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Labour engaged for attending necessary repairs and maintenance to doors & windows - carpenter 2nd class

Labour engaged for attending necessary repairs and maintenance to roof members,wooden stairs, ceiling etc - carpenter 2nd class

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge. Second class teak wood Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)

Water washing and cleaning the old painted surface with pressure pump including hire charges of pump etc complete

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work