Family Court Building (Old Civil Court) at Anand. (Supplying, Erecting, Testing & Commissioning the Passenger Lift & Civil Work)

Name of Work :- Family Court Building (Old Civil Court) at Anand. (Supplying, Erecting, Testing &

Commissioning the Passenger Lift & Civil work)

Memorandum Showing Items of works to be carried out :

Quantities Estimated Rates

Item Estimated Description of Item Unit according to

No. but may be In Figures

In Words estimated quantities

3.00 Demolition of brick work and stone masonry, 562.89 Rupees Five Cum

including stacking of serviceable materials and hundred

disposal of unserviceable materials with all lead and Sixty Two

lift. (ii) in cement mortar

2. 238.00 Dismantling tiled or stone floors laid in mortar 49.12 Rupees Sqm

including stacking of serviceable andmaterials Forty Nine

disposal of unserviceable materials with all lead and

Excavation for foundation

up to 1.5 m depth,

3. 38.00 122.94 Rupees One Cum

including sorting out and stacking of useful materials hundred

and disposing off the excavated stuff with all lead and Twenty Two

lift. (A) Loose or soft soil.

4. 25.00 Excavation for foundation for depth from 1.5 m to 3.0 136.30 Rupees One Cum

m, including sorting out and stacking of useful hundred

materials and disposing off the excavated stuff with all Thirty Six

lead and lift. (A) Loose or soft soil.

5. 37.00 Filling available excavated earth (excluding rock) in 136.92 Rupees One Cum

trenches, plinth, sides of foundations etc. in layers not hundred

exceeding 20 cm in depth consolidating each

deposited layer by ramming and watering.

6. 23.00 Providing and laying cement concrete 1:2:4 (I 3,757.61 Rupees Cum

cement : 2 coarse sand : 4 graded stone aggregate 20 Three

mm nominal size) and curing complete excluding cost Thousand

of formwork in foundation and plinth. Seven

20.00 Providing and laying controlled cement concrete M- 4,566.01 Rupees Four Cum

250 and curing complete, including the cost of Thousand

formwork but excluding the cost of reinforcement for

reinforced concrete work in Foundations, footings, hundred

base of columns and mass concrete like raft etc.

Quantities Estimated Rates

Item Estimated Description of Item Unit according to

In Words estimated quantities

8. 40.00 Providing and laying controlled cement concrete M- 7,322.95 Rupees Cum

250 and curing complete, including the cost of Seven

formwork but excluding the cost of reinforcement for Thousand

reinforced concrete work in walls from top of

foundation level up to floor two level, i.e. all floor

9. 3.20 Providing and laying controlled cement concrete M- 6,335.51 Rupees Six Cum

250 and curing complete, including the cost of Thousand

formwork but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, shelves, hundred

Balconies up to floor two level, for all floor level.

10. 11,984.00 Providing T.M.T. Bar FE-550D reinforcement for 95.36 Rupees

R.C.C. work, including bending, binding and placing in Ninety Five

position etc. complete up to floor two level, for all

11. 120.00 Shear connectors: Drilling holes into existing 550.45 Rupees Five No

concrete substrate for anchoring of new anchoring hundred

rebars with 16 dia shear connectors at 1.5 m c/c

as per drawing and for

additional rebar provision in

repair area and fixing with chemical anchor Lokfix of

Fosroc make Master flow 935 of BASF make / Hilti

Hy200 / Fischer. Drilling hole diameter: 4 mm larger to

rebar dia drilling depth: min 10 times the rebar dia

including cleaning, cutting, fabricating, chemical,

tools, tackles etc. complete as directed by Engineer in

charge. (Material: chemical anchor Lokfix E77 of

Fosroc make / Master flow 935 of BASF make / Hilti

Hy200 / Fischer or equivalent).

12. 18.00 Providing Brick work using common burnt clay 4,596.11 Rupees Four Cum

building brick having crushing strength not less than Thousand

35 Kg / Sqcm in superstructure above plinth Five

to floor two level in mortar 1:6 (I :

fine sand) (B) Conventional brick etc. complete for all Ninety Six

13. 20.00 Providing IO mm thick cement plaster in single coat 282.80 Rupees Two Sqm

on ceiling and soffits of stairs for interior plastering hundred

for all floor, and finished Eighty Two

even and smooth in cement

cement : 3 sand) including finishing

with floating coat of neat cement slurry etc. complete only

for all floor level.

Quantities Estimated Rates

Item Estimated Description of Item In Figures Unit according to

No. but may be In Words estimated quantities

14. 160.00 Providing 20 mm thick double coat mala cement 458.96 Rupees Four Sqm

plaster on interior brick / concrete work for plastering hundred

comprising of base coat of 12 mm thick cement

plaster in cement mortar 1:4 (I cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 cement : 2 coarse sand) finished

with trowel, including scaffolding curing etc. complete

for all floor level.

15. 150.00 Providing 20 mm thick sand faced cement plaster 352.44 Rupees Sqm

on walls up to height IO metres above ground level

consisting of 12 mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8 mm thick finishing coat of C.M.

1:1 (I cement : I sand) etc. complete.

16. 20.00 Wall painting (two coats) with plastic emulsion 88.38 Rupees Sqm

paint approved brand and manufacture on

undecorated ceilings and sloping roofs surfaces to

give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign

matter and sand papered smooth etc. complete for all

17. 160.00 Wall painting (three coats) with plastic emulsion 123.44 Rupees One Sqm

paint of approved brand and manufacture including hundred

applying two coats of acrylic Iapy (putty) and two Twenty

coats of primer of approved brand and manufacture

on undecorated wall surfaces to give an even shade,

including thoroughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth etc. complete as directed by

Engineer in charge.

18. 300.00 Finishing wall with weather proof exterior emulsion 120.26 Rupees One Sqm

paint on wall surface (two coats) to give an required hundred

(7 shape even shade after thoroughly brushing the Twenty

surface to remove all and remains

powdered materials etc. complete.

1,047.00 Steel work, welded in built up sections framed work, 93.39 Rupees

including cutting, hoisting, fixing in position and Ninety

applying a priming coat of read lead paint and two

beams and joists, Thirty Nine

coats of enamel paint. (A) In

channels angles tees, with connecting plates or

angle cleats as in main and cross beams, hip and jack

rafters, purlins connected to common rafters and the

like MS door window work etc. complete as directed

by Engineer in charge.

Estimated Rates

Quantities Total Amount

Quantities Total Amount

Item Estimated Description of Item In Figures Unit according to

No. but may be In Words

Ps. estimated quantities

20. 335.00 Providing and laying water proofing treatment with 1,043.10 Rupees One Sqm

broken China mosaic tiles flooring over average 40 Thousand

mm C.C. 1:2:4 bedding for maintaining slope for plain

and curve surface & 12 mm to 20 mm of broken piece

of ceramic / glazed tiles (one for more colour as

directed) to be laid over cement mortar bedding of C.

M. 1:3 (I cement : 3 sand) contain one KG of water

proofing materials per bag of OPC at plain or / and

slops and to be tempered to bring mortar ceramic up

to surface with using white cement and colour

pigment, including rounding of junctions and

extending them up to 15 cm along the wall and curing

with bends any patterns or design as per drawing and

cleaning by using oxalic acid etc. complete.

21. 141.00 Providing and laying polished Kota stone slab 1,019.39 Rupees One Sqm

flooring over 20 mm (average) thick base of cement Thousand

mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1.1.5 (1

lime putty : 1.5 coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the

shade of slab, including rubbing and polishing

complete. (A) 25mm thick

22. 42.40 Providing and fixing 18 mm thick mirror polished 2, 72127 Rupees Two Sqm

Granite stone of machine cut & full round edge and

polished of approved Seven

quality in cladding on sill and

/ windows / ventilation with 20 hundred

around the Doors

mm thick cement plaster 1:3 and jointed with white

matching pigment cement slurty & adhesive,

including polishing & moulding of exposed edges etc.

complete for all floor level as directed by Engineer-in-

23. 141.00 Providing and fixing pre-cast Rubber Dye / Steel dye 706.93 Rupees Sqm

inter locking concrete block 60 mm thick with grade

of concrete M-300 pneumatic compressed / vibrated hundred Six

by mechanically and as per approved design

confirming to IS: 15658-2006, including 35 mm sand

layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC SP: 63-

2018 etc. complete.

24. 20.00 Providing and fixing 90 cm high Stainless-steel 2,493.16 Rupees Two Rmt

railing made from anti-corrosive 304 grade S.S. pipe Thousand

of 50 mm diameter (16 gauge) as hand rail with S.S. Four

304 grade Baluster of 38 or 40 mm dia (16 gauge) as a

fixed slab at 1.2 m c/c, Ninety Three

vertical support in R.C.C.

including three horizontal S.S. pipes of 16 mm dia (16

gauge) at equal distance fixed by 18.75 mm dia (16

gauge) S.S. pipe with baluster, including accessories as

per detailed drawing etc. complete as directed for all

Quantities Estimated Rates

Item Estimated Description of Item Unit according to

Rs. Ps. estimated quantities

25. 50.00 Providing and fixing to wall ceiling and floor IO Kgf / 339.05 Rupees Rmt

cm2 working pressure polyethylene pipes of the Three

following outside diameter Iow density, complete with hundred

special flange compression type fittings, wall clips etc.,

including making good the wall ceiling and floor. (G)

110 mm diameter

26. 19.00 Providing and fixing special type clamping made out 353.50 Rupees No

from C-Patti, Z-Patti, L-Clamp, U-CIamp with nut / bolt Three

and washers as suitable arrangement for water supply hundred

and plumbing like drainage line, rain water line &

supply for hot & cold water, including line fixing from

ground floor to terrace as per site condition for fixing

etc. complete for all dia as directed by Engineer-in-

27. 1.00 Providing and erecting Approved make Four pole moulded 6,790.43 Rupees Six No

case circuit breaker having breaking capacity ICU of 25 KA. Thousand

at 415 V, having normal current rating up to 25 A to IOOA Seven

with fixed thermal & magnetic release suitable to work on hundred

A.C. supply 50 c/s. with all internal connections, spreader Ninety Paise

tinned copper & complete erected in existing 16 G.M.S. Forty Three

housing. of ICU only Cat III (with Enclosure) only

28. 85.00 Providing and erecting XLPE (IS: 7098) (1)-88 ISI armoured 153.52 Rupees One Mtr

cable multistrand Aluminum conductor for 1.1 KV to be hundred

laid on wall with necessary clamps or in existing trench / Fifty Three

pipe of following size of cables (A) 4 core 16 Sqmm Paise Fifty

29. 8.00 Solder less crimping type Aluminium lugs conforming to IS 15.15 Rupees No

suitable for cable of following size evenly crimped with Fifteen Paise

high pressure tool & connected to switchgear terminals Fifteen Only

with brass / cadmium plated nut bolts in an approved

manner. (C) 16/25 Sqmm.

30. 2.00 Providing and fixing heavy duty flange type brass cable 47.47 Rupees No

gland with rubber ring for PVC insulated armoured cable Forty Seven

complete with out going tails, insulating tape etc for Paise Forty

following size of cables. (D) 2 to 4 core 16 Sqmm Seven Only

Quantities Estimated Rates

Description of Item In Figures

Unit according to

Rs. Ps. estimated quantities

31. Supplying, Erecting, Testing & Commissioning the

passenger stretcher lift having following main features:

(A) General Description of Lifts. [1] Gear Less Lift Drive

(MRL) comprising of High Starting torque Lift 3 phase

V AC Permanent Magnet Synchronous motor of proper

rating with high efficiency shall be used [2] Micro-

processor based PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift

car and door operation which shall be full collective

selective operation hall call demand response, UP / DOWN

hall stops, Main, Up/Down

Contactor with overload and

phase reversal relay and safety controls. [3] Car with M S

platform with bracings of adequate size and to sustain the

impact load cabin + passenger with safety factor of fire for

steel and side panels of Stainless steel of sheet of grade

304 duty. Car ceiling will be S.S. finishes with aesthetic

lights. Car flooring shall be of

appearance with LED ceiling

s/s 304 chaker plate design suggested of Engineer in

charge. Car doors shall be of stainless steel grade

hairline finish with center opening

telescopic automatic

doors. Car panel will also be S.S. finished with

emergency device, mechanical door safety device,

facility of auto/ attended mode. All car panel buttons and

all floor switches must be with brail language as per lift act.

[4] Alllanding doors must be fire rated for 2 hour shall be

fully automatic center

opening/telescopic opening made of

hairline finish steel grade of 304 with key holes and

infrared curtains with Unlocking facility from outside [5]

Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails. [6] Digital scrolling indicator

system for up-down arrow along with floor position

indicator shall be provided inside the car and at all floors.

[7] Full height infrared curtain with multiple cross / crossing

light beams shall be provided. [8] Automatic Rescue Device

(ARD) shall be provided accordingly of passenger capacity

with Manual Rescue Operation (Manual Cranking Facility).

visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed. [IO] Spring buffers/PU Buffers shall

be provided. [II] Car fan as per passenger capacity with

automatic sleep timer shall be provided. [12] Voice

annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel. [14]

Mechanical over speed governor with governor calibration

as parameters and submission

Estimated Rates

Quantities Total Amount

Quantities Total Amount

Item Estimated Description of Item Unit according to

but may be In Figures

No. In Words estimated quantities

of calibration certificate submission, door key holes in the

floor doors, fireman switch shall be provided. [151 Lift

machine hoisting arrangement in the lift machine room

and monkey ladder for lift pit should be provided by the

lift agency, along with the other steel structure works,

foundations for the machine etc. [16] In the hoist way

fascia plate shall be provided without any extra cost, where

ever required as by Engineer in charge. [17]

Permanent wiring with necessary safety devices like RCCB

in all circuit, Over

Voltage Under Voltage protection and

THD eliminator in circuit for lift machine room and lift well

with proper numbers of light points, with fixtures, exhaust

fan and plug points shall be provided by the

3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per

Lift Act/Rules shall be arranged by Lift Agency. [18] Any

civil/ electrical works for additional and alteration in lift

shaft and machine room related to erection of lift shall be

made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift

agency's scope.) [19] Agency has to provide all working

drawings and documents and liaison services for obtaining

all necessary permission from lift inspector and other

authorities. [20] acrylic transparent license/display A4 size

holder in lift car [20AJ As per statutory requirement of

Govt. of Gujarat lift & escalator act 2000, lift agency has to

provide I. Car top safety barricade 2. Push & talk

communication system. 3. Fireman's switch operation at

Ground Floor. 4.carrying out third party lift inspection

during/after lift erection and provide report by third party

authorized by concern licensing authority 5. agency has to

provide third party insurance up to completion of free

maintenance period and submit the document for the

same. [21] Car Panel Operating Buttons with floor position

indicator / buttons must be of Auto Glow type clearly

visible when view from inside cabin. [22] For Physically

Handicapped Person Full Length Handrails of hairline finish

steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car. [23] With

Necessary KVA rating voltage-controlled Stabilizer suitable

for your controller, drive and all equipments of lift. [24]

Necessary rating of DP ELCB/RCCB and FP ELCB/RCCB

scope of work which rating is

suggested by CEICED Department (Electrical Inspector)

(B) Special Features Description of Lifts for Premium

Quantities Estimated Rates

Item Estimated Description of Item Unit according to

but may be In Words estimated quantities

1.00 I. Advanced control system dual 64-bit embedded Rupees No

microprocessor with CANBUS Serial Communication mode Fourteen

including Regenerative power efficient operation, on site Lakh

programming facility, Anti nuisance, Pre-opening, Seventy

BMS/RMS with necessary online real time monitoring Four

system having necessary connectivity for remote thousand

monitoring & other suitable supporting hardware & Seven

software devices to fulfil the

2. Floor Indication hundred

LCD Display with call registration & brail mark with arrival Seventy

& TFT Screen in the car with MP3 Nine Paise

Voice Announcer. 3. CAR Panel should be Scratch resistive Seventy

SS Moonrock finish / Hair Line / Honeycomb for car and all Eight Only

Doors, all landing doors must have fire rating up to 2 hours

and car door must have multi-level crisscross beam door

protection. 4. To & for communication system & wiring (i.e.

car, control room & guard room) and Each elevator are

equipped with remote monitoring system agency has to

provide mobile app and user id and password for

monitoring 8 / 10 Passengers, Ground plus I upper floor

with Rated Speed of 1.0 m/sec., (C) with General PLUS

ADDITIONAL SPECIAL FEATURES attached herewith Prem.

i.e., Rupees Forty Three Lakh Seventy Two thousand Nine hundred Sixty Nine Paise Seventy Two Only

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division, R & B Division,