Repair and Renovation of Zonal Hospital at Dharmashala, Distt. Kangra HP (Deposit work)

Amount

Providing and fixing anodised aluminium work for door, window, ventilators and partitions aluminium frame extrusion sections (No 14081) 127X44.45X3.00mm (one hundred twenty seven into forty four deciman four five into three millimetre) of Jindal / Hindalco aluminium extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work of Hindalko, Jindal for door, window, ventilators and partitions with extruded built up standard tubular and other sections as required of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle,aluminium, snap beading for glazinge/panelling C.P. brass/ stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors window and ventilator including providing and fixing hinges / pivots and making provisions for fixing of fittings wherever required including cost of PVC / neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 12 mm (twelve millimetre) thick both side prelaminated water proof particle board of Action Tesa / Centuary / Kitlam / Kitply /Greenlam / Merinolam as per ISI and approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 6mm (six milimertres) thickness of Modiguard / Sant gobind (weight not less than 13.75 kg/sqm (Thirteen decimal Seventy five kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings, specification and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into milimetres) size Pilot/sheel anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 200x10mm (Two hundred into Ten milimetres) size aluminium Pilot/sheel anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm ( one hundred fifty milimetre) thick M.S. single acting spring hinges bright finished with necessary screws etc. complete, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Demolition of brick masonry below G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 ( twenty ) metres lead Dressed stone in cement mortar, within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers etc; within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting, straighting and placing in position including cost of binding wires complete up to all floors levels within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (One cement isto Four sand) and curing complete within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

White glazed tiles 6mm (Six milimetres) thick in skirting risers of steps and dado 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20mm ( Twenty millimetres) thick granite stone in flooring 20mm ( Twenty millimetres) (average) thickness base of cement mortar 1:3 (one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete, within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20 mm nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Tata/Jindal tube fitting and clamps including making good the wall, ceiling and floor complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No.10010 of Cera / Hindware 55x40 CM (fifty five into forty centimetre) with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittingswithin all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal waste for wash basin or sink complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screw within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per approved drawing and design directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe with brass unions ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore complete. within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing spout with Aerator Swinging 15mm size within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink complete. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm X 75 mm. (One hundred ten into Seventy five milimetre) P.V.C. I.S.I. marked floor trap ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) diametres high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C. Supreme/ Kishan/ Astral or equivalent pipe fittings and accessories single for sewerage pipe plain bend complete including fixing with approved adhesive as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. (Chromium plated) Grating ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Jal/ESS or its equivalent for gully floor or Nahni trap within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint In gratings framed guard bars, ladders, railling, brackets and similar works within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. B.P. sheet TATA/SAIL/JINDAL 2.00 mm (Two decimal zero millimeter) thick fixed in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/ electric welding in position complete (frame work is to be measured and paid for separately) within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint Nerolac/Asian or equivalent brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata / sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 10mm (Ten milimetrees) thick antiskid water proof stain resistant and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600x10mm (Six hundred into Six hundred into Ten milimetres) size manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm nominal (One hundred fifty milimetres) diameter.P.V.C Plain bend of Supreme/Finolex/Prince including fixing with approved adhesive complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten milimetres) diametres PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts complete including fixing with approved adhesive etc. complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick Tata Dura shine prepainted steel sheet ISI marked - Z 120 of approved make in ridges of sail / relience / Jindal Sakti with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Naveen Kumar