SRMO roads, road side drains and construction of 3 Nos. culverts phase-I and II at Industrial Growth Centre Sansarpur Terrace Distt.Kangar (HP).

Amount

Excavation in foundation trenches etc.in earth work in all kind of soil lift upto 1.50mtr.stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating, dewatering each deposited layer by ramming,watering and then disposing of all surplus excavated earth as directed in all leads all leads and lifts.

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling not exceeding 4mtrs and removal of the same in:- (a) Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pillasters buttresses, plinth and string courses and the like.

(b) Flat surfaces such as soffits or suspended floors, roofs,landings and the like floor etc.upto 200mm in thickness.

Providing and laying cement concrete 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.

Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- (a)suspended floors, roofs, Lintels, beams, girders, bressumers and cantilevers upto floor two level.

Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels.

Excavation in earth work and filling in 15cm layers in foundation and plinths including ramming, watering and consolidating upto all leads and lifts complete.

Providing, laying,spreading and compacting grade stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer( Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub- base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density i/c lightining, barricading and maintenance of diversions,etc. as per technical specifications Clause 406. By mechanical means.

Providing and applying primer coat with bittumen emulsion(SS-I)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of :- (i) 0.70 to 1.0kg /sqm.

Providing and applying tack coat with bittumen emulsion(RS-I)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of :- (i) 0.20 to 0.25kg /sqm.

Providing and laying bituminous macadam with hot mix plant using crushed aggregate of grading as per table 500.4 premixed with bituminous binder, transported to site upto lead as specified Laid over a previously prepared surface with paver finisher to required grade , level and alingment and rolled to achieve the desired compaction and as per technical specification clause 504. VG-10 @72.43 kg/cum.

Providing and laying of hot mix bituminous concrete with batch type HMP producing an average output of 75 tonnes per hour using crushed agreegate of specify grading premixed with bituminous binder @ 5.5 % of mix with bitumen of grade VG-30 and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to thye required grade, level and allignmenmt, rolling with wheeled vibratory and tendom rollers to achieve the desired compaction as per specification clause no. 507 complete in all respect.

Providing and laying of hot thermoplastic compound 2.5mm thick i/c reflectorishing glass beads @250gm/sqm thickness of 2.50mm each exclusive of surface applied glassbeads as per IRC35 the finished surface to be levelled uniform and free from stick and holes.

Supply and fixing of 3M-290 series road stud (cat eye) with double moulded shank mad eof poly carbonate and ABS moulded body and reflected panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg in sizes of 90x110x17 mm . further, for durable usage, the studs are constructed using flexible and UV protected material provided with suitable appoxy for fixing to roads including carriage with in all leads and lifts complete including entire satisfaction of engineer-in-charge (As per ASPM standard).

Excavation in dumped stone or mulba i/c stacking of serviceable and un-serviceable material separetely and disposal of un-serviceable material lead upto all leads and disposed material to be neatly dressed complete in all respect.

Dressing the ground including cutting and filling upto 15cm. Including carriage of mateials in all leads and lifts.

Cement concrete flooring 1:6:12 (1cement:6sand:12grasded crushed stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth .

Plain cement concrete M-10(1:3:6 nominal mix) in levelling course below open foundation of head walls as per drawing and specification clause 1109.I/c form work complete.

Providing and laying Cement concrete flooring 1:2:4 (1cement:2sand:4grasded stone agg.20mm nominal size) and curing complete excluding cost of form work in foundation and plinth .

Providing and laying of interlocking concrete paver block ISI mark pavements as per drawings and technical specification Clause 1504 including carriage of material within all leads and lifts. Coloured blocks red, yellow and grey. 80mm thick

Sanjay Gaur

SUBHASH CHAND