BARODA MOR- AUGMENTATION OF WATER SUPPLY SCHEME BARODA MOR BY PROVIDING 2ND WATER WORKS, RAW WATER FOR 1ST WATER WORKS, HOUSEHOLD TAP CONNECTIONS AND LAYING OF BALANCE DISTRIBUTION LINES IN VILLAGE DISTRICT SONIPAT.

Amount

WATER TREATMENT PLANT (WTP) Design & construction of 1.00 MLD capacity Water treatment plant at 2nd Water Works Baroda Mor including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size DI pipe from S & S Tank to Pump chamber, raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) DI pipe for the work will be supplied by the PHE Deptt. free of cost at Reserve stock Gohana.

RAW WATER PUMPING MACHINERY-Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- (2.1.1)- WATER WORKS- 600 LPM X 20.00 M. Head

CLEAR WATER PUMPING MACHINERY- Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- (3.1.1)- WATER WORKS- 600 LPM X 25 M. Head

(3.2.1 ) -1200 LPM X 15 M. Head

PANEL BOARDS FOR MOTORS (4.1)- Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items For 2 no Pumping Sets of 600 LPM x 20 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 20 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.1.1

(4.2)- For 2 no Pumping Sets of 600 LPM x 25 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 25 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.1.1

(4.3)- For 2 no Pumping Sets of 1200 LPM x 15 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1200 LPM x 15 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.1

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc.- 10mm2 3core

25mm2 3core

Sluice Valves / NRV & specials for Pumping Machinery- Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar)- 100mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) - 100mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials- 100mm i/d

Sluice Valves/ Specials For Rising Mains - Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 7.1.1 -150mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 7.2.1- 150mm i/d

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect.- 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all respect.

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect.

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. - 2Ton Capacity at W/W

Supply erection, testing & commissioning of light fittings including complete wiring alon with all material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications. ( 5 no. pump chambers of Boosting Stations + 1 HT Meter Room)

Providing & fixing suitable size floating along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply erection, and commissioning electric operated dewatering pump of 3 HP Kirlosker make complete from priming with wiring starters switches etc. also the required GI pipe (B Class) valves etc complete in all respect.

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. (4 at ww + 2 at Boosting station)

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer or suitable capacity on higher side of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, alongwith APFC Panels for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 5 Years.- 63 KVA at 2nd Water Works

Design, Supply & Erection of 1 No. DG Sets of required KVA as mentioned below suitable capacity on higher side capacity with Acoustic Canopy, AMF Panel and Copper Earthing of suitable rate with change over switch & synchronizing panel complete as per DNIT including operation & Maintenance of 5 Years..- AT 2nd W/W = 75 KVA

Operation and maintenance for the complete scope of work meintioned in the DNIT ( Disinfection material supplied by the PHED) as per schedule –IV for a period of 5 years after 12 month during defect liability period 3 months trial run ( will be changed to the A/mtc Estimate)-(i)-Opertation an Maintenance during Defect liability period (Operation Only)

(ii) Operation and maintencance during 1st year after defect liability period

(iii) Operation and maintenance during 2nd year

(iii) Operation and maintenance during 3rd year

(v) Operation and maintenance during 4th year

(v) Operation and maintenance during 5th year

Bidder Name

Amount

Jai Shree Balaji Constn Co.

Surinder Singh Hooda

Jaiveer Singh Contractor

RAM PHAL SINGH CONT

NAFE SINGH CONTRACTOR

Jaiveer Singh Contractor

RAM PHAL SINGH CONT

NAFE SINGH CONTRACTOR

Jai Shree Balaji Constn Co.

Surinder Singh Hooda

Jaiveer Singh Contractor

RAM PHAL SINGH CONT

Jai Shree Balaji Constn Co.