R/m of various WSS under GP Banethi in JSV section Banethi Tehsil Nahan Distt Sirmour HP

Amount

Excavation in drains and channels etc.in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock & hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.

Demolition above ground level upto floor two level including stacking the serviceable materials and disposal of uniserviceable materials within 20 mtr lead and I/C cutting the necessary reinforcement and separting our from RCC work as per the directed by the Engineer Incharge.

Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0.10 mtr) thickness atteched pillaster, buttresses plinth and string courses etc. from top of foundation level up to floor two level.

Providing form work with steel plates 3.15 mm thick and welded with angle iron frame of 30x30x5 mm so as to give a frame of fair finish including centring , shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu reinforced concrete and plain concrete work in :-

a) Flat surface such as soffits of suspended floors, roofs, landing and the like floorsetc. 200 mm in thickness.

b) Vertical surface such as such as wall ( any thickness parttions & the like i/c attached pillars buttresses plinth & string courses & the like.

Prov. in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1 cement: 3 sand) including all leads,lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:2:4 ( 1cement: 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor. Roofs, landings shelves and cantilevers upto floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.

Relaying of Existing filter media in horizontal layer after washing graded screening as directed by the Engineer Incharge

Broken stone

Bajri 20 t0 25 mm

Bajri 6 to 20 mm

Coarsed sand

Fine sand

Wire crates of GI wire filled with boulders with square cut facesagainst the wire (wire crates is to be measured & paid for separately)

Wire crates made GI wire filled with boulders with square cut faces agains the wire (Boulder filling is to be measured & paid for separataly) GI wire 5 mm thick corresponding to SWG - 6 , 15 cms x 15 cms mesh including all leads,lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing mild/tor steel reinforcement for R.C.C. work including bending and binding and placing in position complete up to floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.

Steel work in built up section, trusses and framed work including cutting hoisting and fixing in position and applying a priming coat of read lead paint in grating framed guard bars ladders railing brackets and similar works including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.

Providing and fixing man hole cover with frame (Light duty single seal pattern 500 mm internal dia, total weight of cover and frame to be lessthan 38 Kg including all leads,lifts nad carriage of material at site and as directed by the Enegineer in Charge.

Providing and Fixing 50 mm dia C.I control/sluice valve PN 1.0 Kirloskar/Leader make as per direction and to the entire satisfaction of the Engineer-in-charge .

Laying and jointing in trenches galvanised mild steel tube for In Let , Out Let and Scour pipe (light grade) tube fitting (earth work to be measured and paid for seperately) including all leads, lifts and carriage of material at site and as directed by tbe Engineer Inchargte.

i) 100 mm Dia ( Light Grade)

ii) 50 mm Dia ( Light Grade)

KUSHDEEP SINGH

Jawant Singh