Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹2.0 L+₹4,322.46 (2.19%)Rejected-AOC | L2 | Rejected-AOC Higher rate | |
| 3 | L3₹2.1 L+₹10,335.80 (5.23%)Rejected-AOC | L3 | Rejected-AOC Higher Rate | |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance KUPPASSERIYIL VALARA P O ADIMALY GRAMA PANCHAYAT | - | Not Admitted-Fee/PreQual/Technical/Finance Others-License is not valid |
| Sl No | Description | Qty | Unit | Faizal K P L1 | Jayesh M L2 | M/s GREEN GRANULES L3 |
|---|---|---|---|---|---|---|
| 1.00Maintenance Works for Roof,Floor etc | ||||||
| 1.00 | OD71601/2026-2027:Steel work in built up tubular with GP pipes ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete using GP pipes and tubes | 149.98 | kg | 150 ₹22,497 Lowest | 177 ₹26,546.46 | 185 ₹27,746.3 |
| 1.00 | OD71600/2026-2027:Steel work for purlin/single section with G P pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 45 | kg | 135 ₹6,075 | 126 ₹5,670 Lowest | 205 ₹9,225 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 21.6 | sqm | 800 ₹17,280 | 745 ₹16,092 | 615 ₹13,284 Lowest |
| 1.00 | OD72966/2026-2027:Supplying and Fixing 200mm uPVC Gutter pipe square type fixing necessary G.I Clamp to line and levels as per the direction | 6 | metre | 400 ₹2,400 Lowest | 856 ₹5,136 | 550 ₹3,300 |
| 1.00 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 68.78 | sqm | 20 ₹1,375.6 Lowest | 66 ₹4,539.48 | 200 ₹13,756 |
| 1.01 | OD71605/2026-2027:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), excluding grouting the joints with white cement and matching pigments etc., complete. Grouting the joints using epoxy grout mix to be done seperately. Size of Tile 1200 x 600 mm. | 68.78 | sqm | 1,850 ₹1,27,243 | 1,861 ₹1,27,999.58 | 1,625 ₹1,11,767.5 Lowest |
| 1.01 | OD71603/2026-2027:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1200 x600 mm | 68.78 | sqm | 200 ₹13,756 | 123 ₹8,459.94 Lowest | 300 ₹20,634 |
| 1.01 | OD71602/2026-2027:Engaging man coolies for various works | 8 | each | 893.8 ₹7,150.4 Lowest | 957 ₹7,656 | 1,050 ₹8,400 |
Tender Value
₹2.3 L
EMD Value
₹5,719
Closing Date
24 Jul 2026, 3:00 pmClosed
Assistant Executive Engineer
Office of the Assistant Executive Engineer PWD Buildings Sub Division Thodupuzha
The estimate includes Providing and laying vitrified floor tiles with epoxy grouting Providing GI pipes for the roofing framework Supplying and fixing roofing sheets and allied accessories
2026_PWD_861124_1
14/AEE/e-tender/tdpa/2026-27
Open Tender
Civil Works - Buildings
Item Rate
90 days
Muttom Thodupuzha
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹5,719
Yes
29 Aug 2026
17 Jul 2026
27 Jul 2026
17 Jul 2026
24 Jul 2026
17 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance Works for Roof,Floor etc | |||||
| 1.001 | OD71601/2026-2027:Steel work in built up tubular with GP pipes ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete using GP pipes and tubes | 1 | kg | - | - |
| 1.002 | OD71600/2026-2027:Steel work for purlin/single section with G P pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.004 | OD72966/2026-2027:Supplying and Fixing 200mm uPVC Gutter pipe square type fixing necessary G.I Clamp to line and levels as per the direction | - | metre | - | - |
| 1.005 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | - | sqm | - | - |
| 1.006 | OD71605/2026-2027:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), excluding grouting the joints with white cement and matching pigments etc., complete. Grouting the joints using epoxy grout mix to be done seperately. Size of Tile 1200 x 600 mm. | - | sqm | - | - |
| 1.007 | OD71603/2026-2027:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1200 x600 mm | - | sqm | - | - |
| 1.008 | OD71602/2026-2027:Engaging man coolies for various works | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1456316.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1456316.xls
BOQ • 0.30 MB
sbd.pdf
Tender Documents • 1.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .