FOR THE EXECUTION OF CIVIL WORK INCLUDING ELECTRICAL FITTINGS AND PLUMBING UNDER THE WORK REFURBISHMENT OF PUBLIC AMENITIES AT TUGHLAQABAD FORT AND GHIYASUDDIN TUGHLAQ TOMB DELHI

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m - All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - All kinds of soil.

Dismantling and removing existing signages comprising of steel signages (SS frame, post, clamps, foundation bolts etc.) and stone signages (sandstone engraved slab including base), complete including cutting of anchor bolts, dismantling of foundation, stacking of serviceable materials at site and disposal of unserviceable materials within 50 metres lead, as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone- III) : 4 graded stone aggregate 20mm nominal size).

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in plain arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete.

Providing and laying 100mm thick lime concrete flooring & coping with brick aggregate 20 to 25 mm gauge n/s & 50% lime mortar 1:1:1 (1 lime : 1 Surkhi : 1 C. Sand) including ramming, beating & top finishing etc. complete including carriage of water & materials with in a lead upto 100 mtr approx.

Random rubble masonry with hard stone in superstructure above level, including levelling up with cement concrete 1:6:12 (cement : 6 course sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like - cement mortar 1:6 (1 cement : 6 coarse sand).

Random rubble stone masonry with required size of D.Q. Stone in the core in Lime mortar 1:1:1 (1 lime, 1 Surkhi, 1 C.sand) including binding materials such as belgiri, gur, gum and san including carriage of water and materials with in a lead upto 100 mtr approx.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone : Buff stone. (For red sandstone, the rates will apply as per DSR Code 11.29.2, but for buff stone, the rates will be as per the instructions issued by the competent authority of the Delhi Circle. Therefore, the stone regulations here will be based on market prices)

Providing and fixing 75 mm thick red sand stone cover over drain including cutting and carving of Jalie in geometrical hexagon approved pattern in red sand stone 18 cm dia for water out let as per matching to the monumnet pattern including supply of red sand stone and including supply of labour T & P etc. complete.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

CEMENT PLASTER (IN COARSE SAND) - 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand).

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red.

Cleaning the sand stone / Kota stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels : Granite stone slab of colour black, Cherry/Ruby red : Area of slab upto 0.50 sqm.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Provision for Purchase and installation at site of readymade Dustbins of Red Sand Stone of Cylindrical shape in single block having top molding and depression as per design on extra surface fully open top outer top dia 580mm and height 750mm of required shape & design.

Provision for Purchase & supply at site of inner bins of Heavy Duty Cylindrical Drum fully open top with separate lid outer top dia 460mm, bottom dia 410mm and height 705mm colour black/ white in hard PVC sintex or equivalent of removable nature to insert under the red sand stone dustbin of size 580mm dia and 750mm height.

Providing & fixing of red sand stone benches having 4 legs of size (0.26x0.26x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site.

Cleaning of existing surface / storm water drain including removal of silt, sludge, rubbish, vegetation and other foreign materials from bed and sides of drain, including lifting, loading, carriage within 100 metre lead and disposal as directed by Engineer-in-Charge, complete.

Providing and fixing PNB on MS sheet as per approved design, size and color mounted on an MS pole painting with approved color including the cost of grouting fixing etc complete.

Providing and fixing CNB as per required on 50 mm thick red sand stone slab of size 1050x750 mm with engraved/etched and colour filled as per approved texts and art work placed over brick masonry pier of size 350x350x1200 mm claded on all four sides with 25 mm thick red sand stone slabs including PCC base in 1:2:4 of size 600 x600 x100 mm including excavation of pit to be 250 mm deep and laying as per design and existing pattern (area to be measured only engraved slab).

Providing and fixing DNB signages as per required on 50 mm thick red sand stone slab of size 1050x750 mm with engraved/etched and colour filled as per approved texts and art work placed over brick masonry pier of size 350x350x1200 mm claded on all four sides with 25 mm thick red sand stone slabs including PCC base in 1:2:4 of size 600 x600 x100 mm including excavation of pit to be 250 mm deep and laying as per design and existing pattern.

Provision for purchase of esential articles which are required during the execution of work. First Aid Box with Materials [EACH]

Wooden Ladder 15 ft. long [EACH]

Green Agro Shade net Clothes 3M wide and 40M length [EACH]

Automatic Soap Dispensers, Soap Dispenser - Automatic capacity: 0.8L material: aluminium/ABS finish: chrome/black (Jaquar or eq) [EACH]

Wall mounted tissue paper dispenser [EACH]

Foot mat on floor area below washbasin (8 sqft) [EACH]

Dustbin Stainless Steel small size 6 ltr [EACH]

Automatic sanitizer dispenser [EACH]

Hand dryer automatic machine wall mounted [EACH]

Provision for purchase of sanitary articles which are required for toilet block etc. complete. Provision of providing and fixing of urinal including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) Jaquar URS white-13255, URS-WHT- 13263, URS-GRM -13253N, URS- WHT-13253N)(Any of the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes) [EACH] Tughlaqabad Fort - 4 Nos, Ghiyasuddin Tomb - 3 Nos

Provision for providing and fixing of Urinal Divider - Glass-Chamfer Shape including all fitting (The Urinal Divider - Glass-Chamfer Shape represents a cutting-edge approach to restroom design, combining sleek aesthetics with practical functionality. Crafted with precision and attention to detail, this urinal divider introduces a touch of sophistication to any restroom environment. Featuring a glass- chamfer shape, this divider boasts a contemporary and elegant design that sets it apart from traditional options. The smooth, angled edges create a visually striking appearance while maintaining a sense of refinement and modernity.)etc complete. [EACH] Tughlaqabad Fort - 3 Nos, Ghiyasuddin Tomb - 2 Nos

Provision of providing and fixing of European (W.C) of wall hanging/mounted including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) Jaquar OPS-WHT-15953BIUFPM, CNC-WHT-959NUF, CNC-WHT- 961NUF)(Any of the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes) [EACH] Tughlaqabad Fort - 2 Nos, Ghiyasuddin Tomb - 2 Nos

Provision of providing and fixing of Hindware White Ceramic Indian Toilet Seat, Height 23 inch with Modern Flush Tank 20 inch Indian Commode (WHITE)including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) J(Any of the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes) [EACH] Tughlaqabad Fort - 5 Nos, Ghiyasuddin Tomb - 2 Nos

Washbasin Tap (Jaquar or eq) for toilet block [EACH] Tughlaqabad Fort - 5 Nos, Ghiyasuddin Tomb - 5 Nos

Angle wall Tap (Jaquar or eq) For Urinal & WC [EACH] Tughlaqabad Fort - 3 Nos, Ghiyasuddin Tomb - 3 Nos

Toilet jet/Hand Shower(Jaquar or eq) For use European (WC) in toilet [EACH] Tughlaqabad Fort - 2 Nos, Ghiyasuddin Tomb - 2 Nos

Tap/Cock (Jaquar or eq) For Indian Toilet [EACH] Tughlaqabad Fort - 2 Nos, Ghiyasuddin Tomb - 2 Nos

Toilet roll holder(Jaquar or eq) For toilet Blosks [EACH] Tughlaqabad Fort - 4 Nos, Ghiyasuddin Tomb - 2 Nos

Long body bib cock (Jaquar or eq) For drinking water purpose [EACH] Tughlaqabad Fort - 4 Nos, Ghiyasuddin Tomb - 4 Nos

Providng and fixing1 hp booster pressure pump with 20ltr water tank including all necessary fitings etc complete (crompton or equavelent). [EACH] Tughlaqabad Fort - 1 No, Ghiyasuddin Tomb - 1 No

UPVC pipe 25mm (10ft) (Astral/Supreme or eq) [EACH]

UPVC elbow 25mm (Astral/Supreme or eq) [EACH]

UPVC Tee 25mm(Astral/Supreme or eq) [EACH]

Tank nipple 25mm (Astral/Supreme or eq) [EACH]

M Tee 25x25 [EACH]

UPVC pipe 20mm (10ft) [EACH]

UPVC elbow 20mm [EACH]

UPVC Tee 20mm [EACH]

B. Elbow 20X15mm [EACH]

M Tee 20x15mm [EACH]

PVC pipe 110mm dia (6mtr) [EACH]

PVC Y Tee 110mm [EACH]

45 degree angle elbow [EACH]

Ball valve 25mm [EACH]

Ball valve 20mm [EACH]

PVC pipe 50mm dia (10ft) [EACH]

PVC Elbow 50mm dia [EACH]

PVC F Tee 50mm [EACH]

PVC Tee 50mm [EACH]

Labour required for above fittings [LS]

Provision for purchase of electric articles which are required for C.A. office & toilet block etc. complete. 1.5 Sqmm copper wire (Havells or eq) [EACH]

2.5 Sqmm copper wire (Havells or eq) [EACH]

Exhaust fan 15 inch (silent) (Havells or eq) [EACH] Tughlaqabad Fort - 10 Nos, Ghiyasuddin Tomb - 4 Nos

PVC tape box [EACH]

Ceiling fan 48 inch (Havells or eq) [EACH] Tughlaqabad Fort - 2 Nos, Ghiyasuddin Tomb - 2 Nos

2x2 feet LED light ceiling (Havells or eq) [EACH] Tughlaqabad Fort - 16 Nos, Ghiyasuddin Tomb - 12 Nos

6 Amp Switch plain [EACH]

6 Amp socket plain [EACH]

16 Amp Switch plain [EACH]

16 Amp socket plain [EACH]

Wall fan Crompton/havells or equiv. [EACH]

Labour required for above fittings [LS]

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge : Nominal concrete 1:3:6 or richer mix (including equivalent design mix).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge : With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30.

Provision for re-fixing of heavy ashlar veneering stone (as per existing wall) below the platform area infront of main entrance of Ghiyasuddin Tomb (80% stone are available on site after dismantling and same to be use for fixing).

Providing and fixing waterproffing flex over the aluminium composite panel for cover area with cutting, pasting etc including all labour & material charges etc complete.

Providing and laying self levelling compound before laying the vinyle flooring (to prepare the equal levelling, approx 3mm to 4mm) RDX-compound-Sika Floor - 125 including labour & material charges etc. complete.

Providing and fixing Wonder floor/Sika/Somai/vinyl flooring, BRAAVO 4.5mm thick densely compacted Sports flooring, Glass Fiber tissue Impregnation for high dimensional stability, made in India, cushioned sports flooring in roll form and skirting in pattern in width of 2.0mtr and 15mtr length, solid, resilient, fully flexible, with PUR guard and protective wear layer of 500 microns, in approved shade, Installation and considering the wastage after cutting the rolls to fit the floor size and also providing thermal welding for a seamless floor providing uniformity and on a smooth and moisture free levelled floor surface using rubber based adhesive Fevicol SR 505 manufactured by Fevicol, all complete and as per the instruction of the engineer in charge. (For Floor)

Providing and fixing Wonder Skirting/Sika/Somai/ vinyl Skirting, BRAAVO 4.5mm thick densely compacted Sports skirting, Glass Fiber tissue Impregnation for high dimensional stability, made in India, cushioned sports flooring in roll form and skirting in pattern in width of 2.0mtr and 15mtr length, solid, resilient, fully flexible, with PUR guard and protective wear layer of 500 microns, in approved shade, Installation and considering the wastage after cutting the rolls to fit the floor size and also providing thermal welding for a seamless floor providing uniformity and on a smooth and moisture free levelled floor surface using rubber based adhesive Fevicol SR 505 manufactured by Fevicol, all complete and as per the instruction of the engineer in charge.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hard drawn steel wire fabric.

Providing and fixing other signages made up of stainless steel, brass plate, son board, ACP sheets where required and necessary as desired by higher authority including all the cost of fixing etc. complete.

Please Enable Macros to View BoQ information