PROVN OF PLASTERING AND CAMOUFLAGE PAINTING OF PERIMETER WALL (EXCEPT SEA SIDE WALL) AT OKHA UNDER GE NAVY PORBANDAR

Amount

Racking out joints / pointing rubble or polygonal rubble stone masonry built in cement mortar complete all as specified and directed.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of antifungal exterior emulsion paint over a coat of resin primer (100% Acraylic) in camouflage pattern as per approved design complete all specified and directed by Engineer-in-Charge.

2nd class hard wood Plain fillets square, rectangular or triangular in section exc 13 & n exc 25 sqcm clean sawn, secured with nails or brands but bull-nosed, splayed, chamfered or rounded on one edge or face, wrought and fixed with screws complete all as specified and directed.

2nd class hard wood Plain fillets square, rectangular or triangular in section exc 6 & n exc 13 sqcm clean sawn, secured with nails or brands but bull-nosed, splayed, chamfered or rounded on one edge or face, wrought and fixed with screws complete all as specified and directed.

35mm thick 2nd class hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauze etc. (without sash bars), edges of farming plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters shall be all as specified in clause 8.20 (a), section 8 of SSR 1991, Part I complete all as specified.

Preparation of newly or perviously untreated surfaces and wood based any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel complete all as specified.

Aluminium Alloy wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Cutting openings, through brick walls or cement concrete walls for door, window and other openings or enlarging existing openings. converting window into dooropenings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.to store and rubbish not exc. 50m complete all as specified and directed.

Pre-cast cement concrete block masonry with solid blocks in cement concrete 1:3:6 type C-1, exceeding 10cm in width and setting in CM 1:4 complete all as specified and directed

2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Factory made 35mm thick, 2nd class hard wood, plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Bands, Straps, supports or stays for rainwater ventilating pipes including bolts, if required hooks (stay) heavy for large gates hook and pintle hinges large hasps and staples chains hand made sliding bolts clamps hold fasts will ties hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar small articles confirming to Fe290, Gde-E-165 complete all as specified and as directed.

200 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil including removing of surplus soil complete all as specified and directed by Engr-in-charge.

PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Removing excavated material exc. 250 m and upto 500 m and depositing where directed at a level n. exc. 1.5 m above the starting point, complete all as specified and directed.

Rolled MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded ST 240 complete as specified and directed.

MS Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde E-250) Quality-A complete as specified and directed.

Mild steel work as in Roof trusses (framed) made of trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) distance pieces, cleats etc including balting, rivetting and welding complete all as specified and as directed.

Mild steel screw nut and bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 5cm long and dia of neck 5 to 10mm complete all as specified and directed by Engr-in-charge.

Preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of anti corrosive paint over a coat of anti corrosive primer complete all as specified and as directed.

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each all as specified and directed by Engineer- in - charge.

20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or floors complete all as specified and as directed.

15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or floors complete all as specified and as directed.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets, restoring all connections, complete all as specified.

PVC connection 600mm long, 15mm size with PTMT nuts complete all as specified and directed.

32mm bore waste coupling of PTMT studs (half of full threas) (Min weight 45 gms each) complete all as specified and directed.

15 mm bore fancy type pillar tap with swan neck , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

Stop cock (Angle cock) fancy type , cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, externally threaded, having weight @ 0.40 Kg/Each, ISI certification marked with IS : 881, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

Brass Chromium plated towel rail, 600mm long, min 20mm dia of superior quality, fancy type complete all as specified.

Preparation of newly plastered surfaces and applying three coats of white wash as in wall complete all specified and directed.

Glazed ceramic tiles, coloured (light colour as approved), of size 450 X 300 X 7 to 8mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete as specified and directed.

Granite of Ist quality 18 to 20 mm thick machine cut, table rubbed and polished as in flooring, steps tread, jambs, pillar, window-cills in single piece including nosing and two nos friction groove, laid over and including 20 mm thick screed bed in cement mortar (1:4) bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone complete all as specified and as directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil including cutting of bushes, saplings and cutting trees not exc. 30m girth etc complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in Soft/disintegrated rock complete as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soft / disintegrated rock complete as specified.

Hard core of broken stone or boulders of guage n exc. 63 mm, deposited, spread and levelled in layeres n exc. 150 mm thick, watered and rammed to a true surface, before concerting or otherwise complete all as specified and directed.

50mm thick sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed.

Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed by Engr-in-charge.

PCC 1:2:4 type B-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

75mm PVC (SWR) floor trap, plain including jointing with solvent cement and white cement complete all as specified and as directed.

Grating square 110 mm size of PTMT openable type (Minimum weight 100gms) complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

32mm bore and 75cm long PVC waste pipe for WHB complete all as specified and directed.

Fancy type stainless steel soap dish,fixed to plugs with chromium plated brass screw complete all as specified and directed.

PVC (SWR) pipes, 75mm bore, single socketed, 2.50 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

PVC (SWR) pipes, 110mm bore, single socketed, 4.00 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

Cutting into existing sewage line manholes for connecting new drains of any dia of pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 100mm dia complete all as specified.

Taking down carefully copper/aluminium point wiring (light/fan, buzzer, socket or power point etc) complete including all fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following:- One light or fan point controlled by one one way switch

All as per item No. 57 above but One 5 Amps 3/5 pin socket outlet on same board with other switches complete all as specified and directed.

All as per item No. 57 above but One 5 Amps 3/5 pin socket outlet on independent board complete all as specified and directed.

Ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified.

LED luminaire, 20W integral, sleek extruded polycarbonate LED channel, with inbuilt electronic driver / control gear, bi-pin holders, connector blocks, etc. with all connected accessories internally pre-wired, including 20W LED bulb connecting lead of 3 core 1.5sqmm flexible copper wire 1.5sqmm from ceiling rose to fitting complete all as specified and directed. Make: Bajaj Cat Part No. BCLSB 20WH or equivalent cat part of makes specified here-in-before.

Modular white cover plate suitable for 3 modules with frame complete all as specified and directed.

Modular white cover plate suitable for 6 modules with frame complete all as specified and directed.

Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 10000 Litre capacity, hoisted and fixed in position, with lid, tounge nipple for inlet, outlet connections complete all as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 5000 Litre capacity, hoisted and fixed in position, with lid, tounge nipple for inlet, outlet connections complete all as directed by Engr-in-Charge.

Construction of valve chambers 600 mmx600mmx600 mm with 15 cm thick solid concrete block masonary, block casted using PCC 1:3:6 type C-1 mix built in cement and sand mortar 1:4, 15 mm plaster to internal surfaces and external surfaces up to 15 cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement, 2 mm thick MS sheet cover including 40x40x6 mm MS angle frame embedded in 150 mm thick PCC 1:2:4 type B-1, with 25x6 mm flat iron hold fast, handles, hinges with locking arrangements, applying one coat of red oxide primer and two coat of synthetic enamel paint to all steel surface and earth work in soft /disintegrated rock disposal of surplus soil to a distance n.exc.50 m. complete all as specified and directed.

25mm bore ball brass valve, high pressure with epoxy coated aluminium rod and high density polythene float ball and fly nut screwed for iron pipe, complete all as specified and directed

Gun mental Ball valves (Disc type), with iron wheel head screwed both ends of iron pipes for 40 mm bore pipe fixed Complete all as specified and directed.

Cutting into existing water pipe line of size 50mm bore including necessary excavation & earthwork inserting GI Tee, Union & sockets for making connection complete all as specified and as directed.

40 mm long Low density polythene pipe (LDPE) of pressure rating 6 KG per Sq.cm suitable of 15 mm nominal bore GI pipe complete all as specified and directed.

25 mm long Low density polythene pipe (LDPE) of pressure rating 6 KG per Sq.cm suitable of 15 mm nominal bore GI pipe complete all as specified and directed.

shree chamunda enterprise

BABUBHAI BHIMABHAI PANDAVADRA