SPECIAL REPAIR TO WELDING SHOP (P-47) AND FIRE OFFICE (T-17) AT NSRY KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light/ dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No 2 above but in skirting over 5mm thick backing coat in cement mortar 1:3 complete all as specified and directed.

M&L for non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed

All as per item No 4 above but in skirting over 5mm thick backing coat in cement mortar 1:3 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured, as in vertical surfaces, size 450 x 350 x 7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 16-18mm thick in riser of steps, skirting, dado over 10mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down the existing water proofing treatment from the roof including cement mortar, removing debris off the premises and cleaning the roof complete all as specified

M&L for RCC surface shall be made dry, clean, even and checked for soundness. Removal of oil, dirt, laitance and other contaminants by manually and surface shall be fairly smooth finish. Plastering the floor, floor and wall junction with 10mm thick cement mortar 1:4 admixed with Nitobond SBR of Fosroc or equivalent of Sika/ STP @ 1 litre per 50 kg bag of cement. Down take rain water pipe Annuar space packing using Conbextra GP2 or equivalent mixed water and filling as per manufacturer's specifications. Water ponding for minimum for 48 hours to be done and injection grouting of construction joints, leaking spot and honey combs with cement atious pressure grouting with 40 psi pump using Cebex 100 or equivalent of Sika/ STP @225 gms mixed to 50kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent of Sika/ STP, over dry surfaces and 1.5mm thick with 2 coats with interval period of 6 hrs over substrate at a coverage rate of 2kg/sqm using spray/squeegee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21 KN/m (ASTM D624-00) and tensile strength of >1.9N/nm2(ASTM D412-90). Termination to be done on wall extending the coating to min 300mm height above the finalized floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete. Screed to slope: Providing, batching, mixing transporting through transit mixers, pumping and laying controlled screed concrete of M20 grade of average 75 mm thickness with a minimum thickness of 50 mm at drain points and slope of 1:150 or required as per the site condition at all levels by admixing necessary admixtures conplast WL or equivalent @ 150ml per bag or cement and mixing graded fibrillated 100% virgin poly propylene fibres in concrete at the rate of 0.90kg/cum as per manufactures specification. Treatment to continue along the vertical surface of 300mm height in shape of round water, curing of 60mm x 100mm shall be provided in every 5m x 5m area, the joints shall be treated with elastomeric sealants Nitoseal PU 40 or equivalent.

Supply only Liquid water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L for junction of RCC chaijja and wall surface shall be made dry, clean, removal of oil, dirt, laitance and other contaminants by manually and surface shall be applied with Sika emaco 348 or equivalent. Coving at junction of wall chaijja shall be of 100mm radius with PCC type B0 using 12.5mm graded aggregate and 10mm thick rendering with CM 1:3 mixed with WPC and above this treatment apply two coat of Sika lastic 379 or equivalent and finished even and smooth complete all as specified and directed. .

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.55 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating Gl based Plain steel sheet 0.55 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr in Charge.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in leveling sourse in foor and mass concrete complete all as specifeid and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20 mm graded aggregate), exc. 10 cm in width and setting in 1:6 cement mortar, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for cement plaster in two coat 8 mm thick in cement mortar 1:4 using WPC over 12mm in cm 1:6 on external surfaces finished even & smooth without using extra cement all as directed. (WPC shall be measured and paid separately)

M&L for rendering cement plaster 1:6,10 mm thick incl finishing the surface even and smooth without using extra cement on internal faces complete all as specified and directed.

M&L for cement plaster 1:3, 5 mm thick incl finishing even and smooth without using extra cement on ceiling/ chajja complete all as specified and directed.

Taking down Chowkats with shutters of area exc 1.5 Sqm but n.exc 4.00 Sqm each without taking off shutters from frame complete all as specified and directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters(without taking off shutters from the frame) including 1 dismantling of PCC bed blocks for hold fasts complete all as specified and directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each complete all as specified and directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing. adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paintcomplete all as spefied and as directed.

S&F extruded aluminium anodised handle 125 mm fabricated type polished and fixed with stainless steel screws complete all as specified and directed.

Supply and fix stainless steel butt hinges medium weight size 100mm size complete all as specified and as directed.

M&L for 100 mm Aluminium anodised barrel tower bolts of extruded section rolled and fixed with stainless steel screws.complete all as specified and directed

S&F in repairs for Vitreous China wash down water closet pan (pedestal pattern), with jet spray white with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make: Hindware/Cera

S&F in repair Vitreous China Urinal, Half stall type, white all as specified excluding flushing pipe and waste pipe in repairs complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 580x400 including pedestal excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

S&F 32 mm waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms/40mm-60 gms) complete all as specified and directed.

S&F 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply only10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. Make: Hindware/Cera

S&F PVC connection 15 mm bore 450 mm long with PTMT Nuts complete all as specified and directed.

Complete removal of existing treatment of exterior surface including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of old surface by complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over 1.5mm to 2mm thick wall putty complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer over 1.5mm to 2mm thick wall putty complete all as specified and directed

M&L for preparation of new surfaces of ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

S&F for powder coated aluminium anodised frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron), complete shall as specified, and as directed.

S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified

S&F for powder coated aluminium sliding window and ventilator frame without sash bar including all necessary jointing cleat, hold fasts, rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium handle, locking arrangement etc based on HINDALCO catalog No. 1. 4087-92.36x29.70x1.20 mm = 3 Track Bottom 2. 4099 92.36x29.70x1.20 mm = 3 Track Side and Top 3.9395-39.00x20.00x1.10 mm Shutter Vertical 4.3994 41.00x20.00x1.20 mm = Shutter top & Bottom. 5.9779 39.00x20.00x1.16xmm Shutter Vertical Inter Lock complete all as directed by the Engineer- in Charge.

Supply and fix aluminum powder coated deco grill 75mm aperture, made out of 7.5mm width and 6mm thick with rubber beading & hooks or aluminum 'F' channel etc complete all as specified and directed by Engr-in-Charge

S&F for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S & F 4mm thick sheet glass ordinary quality and glazing with rubber beading or aluminium snap heading in square or rectangular n. exc. 0.5 sqm in each pane complete all as specified and directed.

S & F for 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in table top, cup board shutters, partitions, shelves etc. complete lete all as specified and diercted

S & F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading or aluminum snap beading in square or rectangular n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F Door closer cast iron body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Dismantling of wall and ceiling boards (fiber, pulp insulation etc.) or insulation boards / slabs / blankets, any thickness including fillet complete all as specified and directed.

S & F 605 x 605 mm size at any height Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S & F Hangers at any height6 mm dia G.l (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long complete all as specified and directed.

S & F 4 mm thick Non asbestos fibre cement buliding boards fixed or laid / inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M & L for preparation of new celing board surfaces and applying two coats of oil bound distemper over a coat of primer complete on ceilings complete all as specified and directed.

S&F for GI frame work for decorative false ceiling (in Steps) seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 & 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approximate 900 mm centre to centre with Gl cleat and steel expansion fastner with and including ceiling section (not exc. 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with clips of 10.50 mm fixed to intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Dismantling ceiling boards any thickness, including cover fillets, complete all as specified and directed.

M & L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacture's instruction complete all as specified and directed.

M&L for preparation of new ceiling surfaces and applying two coats of distemper of oil emulsion over one coat of primer over 1.5 to 2mm thick putty on ceiling complete all as specified and as directed by Engr -in Charge.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work complete all as specified and directed.

Same as per item No 67 above but In fillests, rails, posts, rafters and purlins etc under 40 sqcm in section unframed work

M&L 2nd class HW in scantling fixed clean swan in framed and fixed work all as specified and directed

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails complete all as specified and directed.

Dismanting timber boarding of any description fixed in any position complete all as specified and directed.

M&L for 40mm thick second class hard wood boarding fixed with nails; planned, both sides, as in floor etc complete all as specified and directed.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed.

Supply and Fix 2nd class hard wood 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed.

S&F Aluminium anodised sliding door bolts of size 250mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and directed.

Dismantling and breakingup drain pipes AC/CI/PVC set in cement mortar 100mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 110mm bore complete all as specified and directed.

Same as item No. 79 but 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm single socketed in any length with rubberring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

S& in repair PVC (SWR) junction single (single "T") equal or unequal 110mm bore complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed.

M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection/Path and finishing surfaces of concrete even and smooth without using extra cement complete all as specified and as directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair Steel rolling shutters, (lath thickness 1.25mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Supply and fix in repair stainless steel curtain rail bright finished 25 mm dia decorative type complete all as specified and as directed by Engr- in-Charge.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire complete all as specified and as directed. and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20 mm dia CPVC pipes SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Rotational moulded polyethylene water storage tanks of capacity 2000 Litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F of CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F of CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F of Ball brass valves of size 25 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm dia or for brass ferrule and fixed complete all as specified amd as directed by Engineer-in-Charge.

S&F Angle stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm and taking down old one, complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed.

S&F in replacement of CP angle cock, self closers Pressmatic with wall flange and 200mm connection pipe for urinal posts to fixed in 15/20 mm pipe complete all as specified. Make-Cera, Cat Part No. F9020203 or equivalent in Prayag/ Hindware.

S&F in replacement of Swivel overhead shower (minimum weight 40grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195mm long with bend of 45 degree with flange for fixing with CPVC pipe, complete and all as specified and as directed by the Engineer-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

S&F point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 112 above but for one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board complete all as specified and directed.

All as per Item No. 112 above but for one 3 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per Item No. 112 above but for one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, sheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, sheathed, stranded copper conductor cable complete all as specified and directed.

M&L Modular Switch 1 way 6A, 1 module duly ISI marked, complete all as specified and directed. Make- Anchor

M&L Modular Switch 1 way 16A, 1 module duly ISI marked, complete all as specified and directed. Make- Anchor

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. Make- Anchor

S&F Modular Socket 6A/16A, 2/3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Make- Anchor

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

S&F Modular fan step regulator, 120W - 2 module complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

S&F in replacement of LED bulb of 9 Watt, B22 base all as specified and directed. Make- Gold Medal, cat part No. GL 91033 or equivalent in Crompton/ Wipro/ Surya/ Havells

S&F in replacement of LED light fitting 1 x 20 Watt 120 Lumem/ Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in replacement of LED light fitting mirror type with high output diffuser 2 feet 10 Watt 110 Lumen/ Watt, 220V, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 120 Lumen/ Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection ete complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of LED luminaire 600mm x 600mm, 40W 120 Lumen/ Watt, 240 Volts, single phase Surface type with high efficiency PMMA diffuser soft glare light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor of size 23/00.0076 all as specified and directed. Make-Gold medal, Cat Part No. GL91824 or any other make in the approved manufactures list.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt 120 Lumen/ Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed by Engineer-in-charge. Note- Old fans to be deposite at AGE E/M (NW) store yard.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-Charge. Note- Old fans to be deposite at AGE E/M (NW) store yard.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-Charge. Note- Old fans to be deposite at AGE E/M (NW) store yard.

S&F in replacement of ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection ete all as specified and directed by Engineer-in-Charge. Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard.

M&L for cutting hole making good, the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 20 Amps, 240 Volts ete all as specified and directed by Engineer-in-Charge

S&F triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB of 32 Amps 415 Volt including taking down old unserviceable eath plug complete all as specified.

S&F factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

Material & Labour for submain wiring with 4 runs of 10 sqmm single core, PVC insulated, unsheated, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC consealed conduit with all accessories on surface, one run of 10 sqmm cable single core PVC inslated, unsheathed, 1100 volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed by Engr-in-Charge. Note: Four runs of 10 sqmm size PVC copper cable, one run of 10 sqmm earth conductor and one run of PVC conduit shall be masured as one unit length

All as per item No. 139 but 2 single core 10 sqmm PVC copper conductor including 1 runs of 10 sqm copper conductor as earth wire complete all as specified and as directed by Enge-in-charg Note: two run of 10 sqmm size PVC copper cable , one run of 10 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length

All items as per 139 but 2 single core 6 Sqmm pvc copper conductor includig 1 runs of 6 sqmm copper conductor as earth wire complete all as specified and as directed by Engr-in-Charge. Note: Two runs of 6 sqmm size PVC copper cable, one run of 6 sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M&L in repair of Indoor type LT Panel by replacement of front door and shutter, made out of CRCA sheet 3.15mm thickness with necessary fabrication work like replacement of hinges, locking knob with welding and painting with two coats of enamel paints over a coat of red oxide matching with existing panel color, including disconnet/refixed old UG cables and replacement of MCCB and MCB's as required, testing complete all as specified and directed.

MS BUILDERS (BID ID -3213906)

LAKSHMI BUILDERS (BID ID -3213821)

Aarjay Tech Engineering (BID ID -3218389)

SUKU CONSTRUCTIONS (BID ID -3218393)

Anaswara Constructions (BID ID -3220749)

Classic Builders (BID ID -3220753)

M/s ANTONY THOMAS AND CO (BID ID -3214073)

AMRITH ENGINEERS (BID ID -3214210)

M.J.JOY AND COMPANY (BID ID -3213845)

K THOMAS AND COMPANY (BID ID -3213938)