Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.3 L+₹2.1 L (5.78%)Rejected-AOC KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L2 | Rejected-AOC Not Being L1 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(CG)KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENTS TO BUILDING NO P-05 OF CGAE KOCHI.
2023_MES_594561_1
8873/E8
Open Tender
Civil Works
Item Rate
180 days
NEDUMBASSERY
As per NIT/Tender documents
8 documents required · 8 mandatory
₹500
GE(I)(CG)KOCHI
₹78,000
Yes
13 Jul 2023
11 May 2023
24 Jun 2023
11 May 2023
17 Jun 2023
29 May 2023
11 May 2023 - 18 May 2023
Amount
Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed.
Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) complete all as specified and as directed.
Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed.
Material and labour for Plain cement concrete 1:4:8 type C2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in foundations including raft, footings , plinth beam, bases for columns, basement slabs and mass concrete and similar work complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.
Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed
Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.
Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.
Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.
Use and waste of formwork to sides of foundation footing, for rough finished surfaces, flat complete all as specified and as directed.
Material and Labour for 0.8mm thk GI deck shest confirming to IS-277-1992 as in permanent shuttering over which MS wire mesh shall be laid at 100x100mm grid including egde trim covered with concrete. This metak deck will be supported on structural steel beam with shear stuck (Structural steel like Beam, column, Joist etc and concrete of different grade as per design complete all as specified and as directed by Engr in Charge
Supply and fix rolled mild steel in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding, grinding ect), and laid over in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 15 mm thick backing coat in CM 1:4 and pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately.
Material and Labour for Mangalore pattern roofing tile of any direction and in any position fixed with self tapping screws over top of MS /Structural steel purlin etc complete all as specified and as directed
Supply and fix aluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.
Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.
Supply and fix Aluminium Powder coated sliding window shutter using aluminium section weighing 0.55kg/m, 20mm thick using standard vertical handle section, interlocking section, top and bottom rails, U channels for all -around for gauge shutters. All sections are of medium weight series of approved make in three track sliding window in which two shutters of with and including of 4mm thick Modi guard or equivalent float glass and one shutter fixed with inclusive of stainless steel wire mesh of size 0.30mm nominal dia and average with of aperture 1.40mm, including necessary jointing cleats, glazing clips , good quality bearing rollers, Neoprene rubber Gasket and rubber beading of any type, screws , aluminium fitting such as Gasket, handle (01 Nos on each shutter), interlocking arrangements complete all as specified and asdirected by Engr in Charge. Note: The quoted rate shall be inclusive of 4mm thick float glass and Stainless steel wire cloth.
Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed.
Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:4 all as specified and as directed.
Material and Labour for Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks laid with special adhesive as recommended by manufatures in steel structures of any description and in any position complete all as specified and as directed by Engr in Charge
Material and labour for 15 mm thick rendering on brick/concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for rendering 5 mm thick in cement mortar 1: 3 on fair faces of concrete surfaces of ceiling finished even and smooth with out using extra cement, complete all as specified.
Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.
Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.
Material and Labour for Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete for stays foundation/ filling and mass concrete and removing and depositing surplus concrete to clear off the site complete all as specified and as directed.
Supply and fix mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 15 cm and not exceeding 22.5 cm and dia 11 to 15 mm complete all as specified and as directed.
Supply and fix Mild steel flat iron section as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Excavation over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.
Material and Labour for 100mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork, complete all as specified and as directed.
Material and Labour for vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile exceeding 1 sqm and not exceeding 1.5 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:4 complete all as specified and as directed.
Material and Labour for glazed ceramic coloured Digital wall tiles (including Digital Highlighters etc) in vertical surfaces of size 450x300x7 to 8 mm thick including and with matching highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10 mm thick in CM 1:3 as backing of wall tiles complete all as specified and as directed.
Material and labour for second class hard wood(indian teak wood) plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed.
Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed.
Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.
Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.
Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.
Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed.
Supply and fixing 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified
Supply and fix waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.
Supply and fix Bib tap cast copper alloy CP , with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete all as specified and as directed
Supply and fix Single lever 3 inlet Divertor Exposed parts kit Cat part No Jaquar ALI 85193K Consisting of Operting lever, wall flange & buttonf only suilatbe for ALD 193 complete all as specified and as directed
Supply and fix Conceled Body for 3 inlet Single lever diverter cat part No ALD 193 with button assembly cartridge sleeve but withoutor Exposed parts complete all as specified and as directed
Supply and fix Overhead shower dia 180mm round shape single flow with air effect (ABS body & Face plate Chrome Plated) with Rubit Cleanign System) cat part No OHS-1755 complete all as specified and as directed
Supply and fix Bowl with cistern for extended wall hung WC with PP soft close seat cover, hinges, Dual flush cistern, fitting, acesseries set Size 380x630x770mm Jaquar Cat part- CNS WHT-353SPPZ complete all as specified and as directed
Supply and fix wall to wall enclosure with 2 fixed glass and 1 openable door in between with suqare hardware and profile of ht 2000mm, width 1200-1600mm of 8mm thk galss of Jaquar cat part No JSE-CHR-S830G1216H20X complete all as specified and as directed
Supply and fix single lever basin mixer without popup waste system with 450 mm long braided hoses of Jaquar cat part No VGP-81051B complete all as specified and as directed
Supply and fix wall hung Intergrated basin with fixing acessseries sixe 490x430x390m Jaquar cat part No KUS-WHT-35803 complete all as specified and as directed
Supply and fix Hand shower ( Health faucet) with 8mm dia 1.2 mtr long flexible tube and wall hook of Cat part No Jaquar ALD 573 complete all as specified and as directed
Supply and fix Angular Stop cock with wall flange of Jaquar cat part No FUS-29053 complete all as specified and as directed
Supply and fix Soap dish holder of Jaquar cat part No ACN-1131N complete all as specified and as directed
Supply and fix Corner glass Shelf with bracket of Jaquar cat part No ACN-1173 complete all as specified and as directed
Supply and fix Glass Shelf 550 mm long of Jaquar cat part No AQN 7771 complete all as specified and as directed
Supply and fix Toilet Roll Holder of Jaquar cat part No AKP-35751P complete all as specified and as directed
Supply and fix Bath tub spout with button attachment for hand shower with wall flange of Jaquar cat part No SPJ-463PM complete all as specified and as directed
Supply and fix Hand shower of dia 105mmm round shape single flow with air effcet (ABS body and face palte chrome plated) with rubit cleanaing system of Jaquar cat part No HSH -1717 complete all as specified and as directed
Supply and fix Flexible tube 8mm dia and 1.5m long with nuts of Jaquar cat part No SHA-549D8 complete all as specified and as directed
Supply and fix in repair sinks made of stainless steel 1 mm thick kitchen or laboratary with plugs, washers and wastes incl bedding in CM on to dwarf walls, or incl fixing cantelever brackets & connecting union to pipe overall size 458 mm x 410 mm x 420mm without drain board and bowl size, 405 mm x 355 mm x 160 mm including waste Pipe all as specified and as directed. Make: Blue Star/Nirali/Diamond/ Pheonix.
Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 metre away and depositing where as directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.
Material and Labour for 19mm thick plywood, grade BWR, type BB, fixed with adhesive and nails as in working table of any shape and design etc to the required size and pattern and fixed in position as directed by Engineer-in-charge complete all as specified and as directed.
Material and Labour for 12mm thick plywood, grade BWR, type BB, fixed with adhesive and nails as in working table of any shape and design etc to the required size and pattern and fixed in position as directed by Engineer-in-charge complete all as specified and as directed.
Material and Labour for 9mm thick plywood, grade BWR, type BB, fixed with adhesive and nails as in working table of any shape and design etc to the required size and pattern and fixed in position as directed by Engineer-in-charge complete all as specified and as directed.
Material and Labour for 0.9mm thick decorative laminate type - I of surface finish(colour & pattern as approved) fixed with approved adhesive as per manufacturers instruction as in finishing of plywood surface of working table of any pattern and design complete all as specified and as directed.
Supply and fix Cast brass powder coated automatic lock and release butt hinges of size 100mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 75mm complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular, clean swan of sectional area exc. 6 sqcm and not exc. 13 Sqcm fixed with nails or brads complete all as specified and as directed.
Material and labour for two or more coats of French polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.
Material and labour for preparation of old plastered/concrete surfaces of walls and applying texture design by using royale play (Basecoat , top coat and clear coat) of approved shade/tint over a coat of compactable primer, over 1mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed.
Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including PVC profile ceiling of surface laminated any pattern and any shade of 7 to 10 mm thickness and any colour completely all as specified and as directed.
Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.
Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia fixed to wall complete all as specified and as directed.
Supply and fix PVC (SWR) bends 110mm with access door complete all as specified and as directed.
Supply and fix PVC (SWR) bends 75mm with access door complete all as specified and as directed.
Supply and fix in repairs 110mm PVC (SWR) branch piece , single (Single Y) equal or unequal all as specified and as directed.
Supply and fix in repairs 75mm PVC (SWR) branch piece , single (Single Y) equal or unequal all as specified and as directed.
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps
(b ) one fan point point controlled by one switch 5 Amps
(c) One 3 pin socket outlet 5 Amps on Independent board
(d ) One 3 pin socket outlet 5 Amps on same board
All as per Item No. 89 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.
Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.
Supply and fix Modular socket outlet, 6 Amps, 2 and 3 pin combined complete all as specified and directed.
Supply and Fix switch socket combination 3 pin, 5 Amps, 230 volt AC with ISI marked flush type complete all as specified and as directed.
Supply ans fix Modular switch socket combination 16 A 6 pin complete all as specified and directed.
Supply and fix Ceiling rose in poly carbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed.
Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells /Philips/Bajaj.
Supply and fixing LED light liner suspended made from aluminium extruded housing ,opaque polymer diffuser with provision os suspension wire gear for modern suspended lighting 40w 4ft complete with driver, holders & LED lamp including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells /Philips/Bajaj/Crompton.
Supply and fixing LED light decorative and aesthetically designed ceiling suspended disk lighting made from aluminium extruded housing ,opaque polymer diffuser with provision of suspension wire gear for modern suspended lighting 30w circular PS type complete with driver, holders & LED lamp including connecting up with driver three core flexible copper Conductor cases of suitable size complete all as specified and directed. Make: Havells /Philips/Bajaj/Crompton.
Supply and fix wall mounting fan 450mm sweep single phase 230 volt connecting complete all as specified and as directed. Make:Havells /Usha/Crompton/Bajaj
Supply and fix Exhaust Fan of size 200 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed.
Supply and fix MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.
Supply and fix MCB SPN, 240 Volts, 40 to 63 Amps rating 240 V, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.
Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FR) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .
Schedule of Credit (Minus) Rs.1250.00 NOTE: Bidder shall insert credit amount of Rs. 1250.00 as rate in Green field under Col-13.
K.V.GEORGE AND COMPANY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .