Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹9.2 LAdmitted-Fee/PreQual/Technical/Finance EAST CHANDMARI WARD NO 4 WEST TRIPURA PIN 799003 | WEST TRIPURA | TRIPURA | 799003 | L1 | Admitted-Fee/PreQual/Technical/Finance | ||
| 2 | L2₹9.4 L+₹13,686 (1.48%)Admitted-Fee/PreQual/Technical/Finance KALITILA TELIAMURA KHOWAI TRIPURA | TELIAMURA | KHOWAI | TRIPURA | L2 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹9.7 L
EMD Value
₹19,413
Closing Date
21 Sept 2026, 3:00 pmClosed
EE, CCD, Kunjaban Extension
o/o the EE, CCD, Kunjaban Extension
Providing making and installation of wardrobe in Government quarter complex at Bhallukya Tilla including other allied works , under the jurisdiction of Capital Complex Subdivision No-II under Capital complex Division building during the year 202
2026_CEPWD_76833_1
44/DNIT/EE/CCD/PWD/2026-27
Open Tender
Civil Works
Percentage
180 days
Capital Complex Extension, Agartala
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹19,413
25 Sept 2026
11 Sept 2026
21 Sept 2026
12 Sept 2026
21 Sept 2026
12 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 10 | Sqm | 156.4 | ₹1,564 |
| 2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
(i) Two or more coats on new work | 100 | Sqm | 115.6 | ₹11,560 |
| 3 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 50 | Sqm | 13.3 | ₹665 |
| 4 | Wall painting with acrylic exterior paint (one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. | 100 | Sqm | 97.5 | ₹9,750 |
| 5 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. | 50 | Sqm | 75.4 | ₹3,770 |
| 6 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :
20 mm dia. | 60 | Sqm | 501 | ₹30,060 |
| 7 | Providing and fixing fly proof galvanised M.S. wire
gauge to windows and clerestory windows using
galvanised M.S. wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia.
0.63 mm.
With 12 mm mild steel U beading. | 20 | Sqm | 792.7 | ₹15,854 |
| 8Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineer in charge. (Glazing and paneling and dash fasteners to be paid for separately) :- | |||||
| 8.01 | (A) For fixed portion of approved quality:- (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | 50 | kg | 474.1 | ₹23,705 |
| 8.02 | (B) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-
(i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | 50 | Kg | 555 | ₹27,750 |
stage.html
html • 0.02 MB
finance_78216.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.75 MB
fdnit.pdf
Tender Documents • 3.34 MB
BOQ_78216.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .