07 Webel IDM BN4 Interior 20 21 19

Amount

Supplying providing & installing free standing modular work tables 750mm high along with all 25mm prelam MDF made 3 drawer pedestal(with locking arrangement) with hydraulic channel for smooth operation Key board tray , CPU trolley etc. The top fabricated out of 25 mm PF bonded MDF board with 0.7 mm high pressed laminate on top and 0.7 mm balancing laminate on bottom of wood fibre bonded with Urea formaldehyde for interior grade . The edges will be duly chamfered and finished with PVC lipping of 2.0 mm thickness. The top will be supported on 25 mm pre-laminated 2 Nos MDF boards side. All exposed surfaces will be finished with 2.0 mm PVC lipping, the board sides will be connected with Apron/Modesty panel of 25 mm thick pre-laminated MDF board with PVC edge binding. Suitable gromet to be provided for cables. The shape of the table will be rectangular, semi­circular or any other shape as approved by client. ABS wire manager would provide in the Worktop as per drawing.Leveller Button-Type Nylon/PVC level-adjustor. Key Board Trey - Width:600mm, Depth:270 ,Height:70mm,tray Slide on ebco Telescopic Channel, The tray hanged below the top by steel MS brackets. CPU Trolley with locking system wheel: Width:240mm Depth: 245mm, Height: 210mm Made up of press formed MS CRCA (I.S. 513 CR1 ) sheet 1.0mm thk. with width adjustable, Finish: All steel components should be powder coated with Epoxy polyester in Glossy finish to a thickness of 40 to 60 microns after 7-8 tanks anti rust treatment of surface. The rate shall include all design, any support (if required) for Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers, nut bolts, washer, Buffer plates, fastener, anchors, SS channel, laminated glass etc. complete in all respect. All floors & roof. The products should be tested as per BIFMA standards. The product should have ISO 9001:2000 and ISO 14001-2004, OHSAS 18001:2007 certifications, BIFMA SILVER or FIRA & IGBC Green GREENGUARD certified. The above modular Workstation should be as per specification and sample approved by client. Table Size: 1200mm X 600mm X 750mm Ht.

FULL HEIGHT STORAGE : Supplying, fitting, fixing and installation of Full Height Storage size 500mm (D) x 2100mm (H) made of Top & Bottom (25mm), Two Side & Front (Door) 18mm thk.& back 18mm thick Pre-Laminated MDF made MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF Multiple number adjustable shelf mounting holes provided on side panel for easy interchanging or fixed of shelf height as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative aluminium/stainless-steel door handle. The Skirting units are provided with 150mm high skirting made of 25mm thk. Pre-Laminated MDF The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

HALF HEIGHT STORAGE : Supplying, fitting, fixing and installation of half Height Storage size 450mm (D) x 1200mm (H) made of Top & bottom (25mm), Two Side & Front (Door) 18mm thk.& back 18mm thick Pre-Laminated MDF made MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF made MDF Multiple number adjustable shelf mounting holes provided on side panel for easy interchanging or fixed of shelf height as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative aluminium/stainless-steel door handle. The Skirting units are provided with 150mm high skirting made of 25mm thk. Pre-Laminated MDF. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

LOW HEIGHT STORAGE : Supplying, fitting, fixing and installation of Full Height Storage size 450mm (D) x 750mm (H) made of Top & bottom (25mm), Two Side & Front (Door) 18mm thk.& back 18mm thick Pre-Laminated MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF Multiple number adjustable shelf mounting holes provided on side panel for easy interchanging or fixed of shelf height as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative aluminium/stainless-steel door handle. The Skirting units are provided with 150mm high skirting made of 25mm thk. Pre-Laminated MDF. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

OVERHEAD STORAGE :- Supplying, fitting, fixing and installation Pre-Laminate overhead Storage size 450mm (D) x 450mm (H) made of Top, Two Side, back, Intermediate(if required) & Front (Door) 18mm thk. Pre-Laminated MDF (Both or side decorative laminate as per requirement, as per IS: 14587-1998 . Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. provide door hinge(Stainless steel) locking arrangement, decorative aluminium/stainless-steel door handle. The products should be tested as per BIFMA standards. The above storage should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Supplying and fixing panelling to wall, column upfo soffit of ceiling, beam and bulk head made of (MIN SIZE 25 x 37.5 x 2) mm aluminium hollow tube frame work for both horizontal and vertical members linked horizontally & vertically, top runner, bottom skirtring, end twin corner posis, complete as per drawing and direction with all labour & materials. Allow for cutting chase to walls, floors and ceiling and mending good damages to match with the adjacent surface. Frames are to be fitted to floor/masonry/RCC surface by means of approved metal expansion fastener. The outer face of the panelling is to be finished with decorative laminate/veneer over 8/9 mm thick PF bonded BWR & borer proof plywood with IS 303 mark.daminate/veneer shall be paid separately) The rate should include necessary approved quality hardware fittings and fixtures, adhesive etc required for the purpose and necessary arrangement shall be made to both vertical and horizontal members by cutting slots for drawingof raw power, UPS power, LAN connection, telephones etc and also making provision for fixing of power outlets switch etc. Special cover plates pierced for fittings of switch board should be fitted on the frame work.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]. complete. 4 mm thick.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]. complete. complete. 6 mm thick.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]. complete. 9 mm thick.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. complete.12 mm thick.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. . complete.16 mm thick.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. complete. 19 mm thick.

Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. 25mm

Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge.

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1 mm

Supplying and fixing 3.5 mm thick (approx) veneer of approved quality over plywood (plywood measured separately aganst respective item) to partition, column encasing, table, cabinets and for other surfaces etc as per drawings and directions includingTwo or more coat polishing of approved shade with malamine finish. The rate should include adhesive (Fevicol) nail, screws etc and other as required hardware fittings & fixture for proper fixing complete in all respects as per drawing and direction with all labour and materials (Payment shall be made for finished surface area).

Supplying, fitting, fixing of premium quality wall paper with textured effect including jointing, adhesive all labour and material complete to the satisfaction of enginer in charge

Supplying, fitting, fixing Key Board (inside security room & reception area) size 600x450mm using 18mm ply and having 30 nos hook fixing inside the box. The box made of 18mm thk ple wood & 5mm glass top shutter locking areagement. The box depth 150mm. complete to the satisfaction of enginer in charge

Supplying, fitting, fixing Notice Board size 600x450mm with 12mm ply upholstered with fabric and the Notice board box made of ply wood with 5mm glass top shutter locking arrangement. The box depth 150mm. complete to the satisfaction of enginer in charge

Providing fixing installation of curtain upward or side opening type with curtain , rails , rope, wire, pulley, runner with decorative cotton or Polyester cloth. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

supply fixing and installation window vertical blind best & premium quality prewith mechnical system in any sizes as per Direction of Engineer in charge. The products should be tested as per BIFMA standards for at least ten years. The product should have ISO-9001:2015, ISO-14001:2015, ISO-18001:2015, OHSAS 18001:2007 certifications. Energy management system as per ISO-50001-2011, in accordance with the TÜV NORD CERT auditing and -certification procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products and Provide Solutions for Home & Work Space and Should have Green Guard, FIRA Certification for few of its products. . The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary. services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. The rate shall include all design, any support (if required) above false ceiling for fixing the partition, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

supply and installation of lightweight and portable aluminium Self Supporting Extendable Ladder Heavy Duty. designed for use by one or two people, a single worker can easily set up, use, move, and take down the minimax system without assistance. it is designed to be mobile on the work site: its compact design means that it can fit through doors and down corridors without needing to be taken apart. locking castors allow for single person movement and for secure locking when in use. with a safe working height of up to 6 m using optional stabilisers and a maximum safe platform weight of 200kg, the minimax aluminium tower is perfect for most construction and industrial jobs. snap click fittings: designed for ease of assembly adjustable platform height: place the platforms where they’re needed for any job compact design: first through doorways and down corridors without the need for disassembly. locking castors: swivel castors allow for the tower to easily be moved around the worksite by a single labourer.

Supplying fitting & fixing 1000mm dia Flexible Polycarbonate Convex mirror with stand (ISI). The are not affected by any Type of light ray and will not produce toxic fumes if burnt. Convex mirror minimum weight 10kg. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary. services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 18 mm thick.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 25 mm thick.

Supplying fitting & fixing Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (including the cost of bolts, two coat primer & synthetic enamel paint, nails, screws etc.). seasoned Sal : Siliguri. complete in all respect. (Note: The sal wood frame work shall be fixed to the existing RCC slab with M.S. clamps 25 X 4mm. thick wood planks after filling wood filler and sand papering up to smooth finish in natural colour also including making necessary provision for fixing junction box in floors, all complete with Franch gata polish as per drawings and direction of EIC. (Stage Height Maximum 700mm).) complete in all respect. All floors & roof.

PACIFIC ENGINEERS

R, B, ENTERPRISE

PARK INTERIOR

VIBGYOR