REPAIR TO ROOF SHEET WOODEN FLOORING AND CABINET INCLUDING POLISHNG TO CEILING ETC UNDER AGE BR II AT IMA DEHRADUN

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc including demolition of existing old concrete complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed

100mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in hardstanding including necessary formwork and spike rolling or making impression of expanded metal while the concrete is green etc and including demolition of existing old cement concrete complete all as specified and directed

Granite stone of any colour (of any type) 20mm thick machine cut, in floors bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing including dismantling of existing granite stone complete all as specified and directed

Udaipur green marble work, 18 to 20 mm thick (table rubbed and polished) as in cooking platform with and including 20 mm thick cement screed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges including dismantling of existing marbal work complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situtions complete all as specified and directed.

Machine cut Kota stone slab flooring 20-22 mm thick laid over and including 20mm screed bed in CM 1:4 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish including dismantling of the existing kota stone flooring of any description etc complete all as specified and directed

Machine cut kota stone slab mirror polished 20-22mm thick as in skirting/dado over 10mm th rendering in cm 1:4 & jointed with grey cement slurry mixed with pigment to match the shade including dismantling of the existing kota stone skirting/dado of any description etc complete all as specified and directed

Vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. .

Vitrified ceramic coloured tiles 10 mm thick (square/ rect) polished, in verticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 including dismantling of existing tiling complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 300x450 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 300x250 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough including demolition of old existing concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed (Work to be carried upto a height of 7.5 m)

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of cement primer complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

18mm thick colour PVC prelaminated board fixed to timber frame work as in cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

Magnetic PVC catcher for kitchen cup board complete all as directed

25mm dia cupboard knobs of brass polished & fixed with screws etc complete all as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Pre- painted galvalume aluminium Zinc coating GI based tile profile corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding ridges to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

2nd class hardwood as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed

4mm thick 'E' board classic factory finish as in false ceiling including supply and fixing 'Tee" grid frame work made of special section of MS galvanized sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flange fixed to RCC/CGI roofing with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mm x24mmx0.60mm and perimeter angle 24mmx 24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall all as per manufacturer's instruction and including taking down existing boards any thickness including cover fillets etc complete all as specified and directed

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repair complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400mm including bracket, 32mm brass CP waste fitting, PVC waste pipe fixed in repair complete all as specified and directed.

15mm dia pillar taps, rocket type with aerator fixed in repair complete all as specified and directed. Make- Jaguar Cat part No SQT-507KN or equivalent of Cera/Hindware

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-512KN or equivalent of Cera/Hindware

15mm bore stop valve chromium plated male end screwed both end for iron pipe fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-513AKN or equivalent of cera/Hindware

CP grating 100mm dia with hole for waste pipe complete all as specified and directed..

Complete removal of existing treatment on walls, including preparation and applying wall putty 1.5 mm thick and finaly applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Solid PVC wall lining consisting of 5 mm thick wood grain / coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawings in SSR in repair, complete all as specified and directed

5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing in repair complete all as specified and directed

GI frame work for seamless ceiling comprising of GI perimteter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermiediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web and 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, fixed in repairs complete all as specified and directed.

12 mm seamless calcium silicate ceiling made out of board of siliceous and calcareous material reinforced with cellulose fibre as in flat, curved, any sunk or raised moulding fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to providing seamless finish fixed in repair complete all as specified and directed.

PCC (1:2:4) type B-1 (using 20mm graded stone agg) as in roof kerbs, mud stops, coping, kneelers, apex stone, bed plates, kerbs roofrounded or chamfered on edges complete including demolition of existing cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

Screed bed 10mm thick in CM 1:4 finished even and smooth without using extra cement on roof mixed with water proofing compound as per manufacture instruction (WPC shall be measure and paid separaterly) etc complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment from RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance n.exc 500m complete all as specified and directed. Note:- The work shall be executed through authorised applicator approved by GE.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m high and rate shall be inclusive of all necessary scaffolding and shuttering))

Prepration of scrapped surface of wall / ceilling and applying 2mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. (work to be carried upto a height of 7.5m and rate shall be inclusive of all necessary scaffolding and shuttering).

Preparation of puttyied surfaces of wall/ceiling and applying one coat of primer complete all as specified and directed.(work to be carried upto a height of 7.5m and rate shall be inclusive of all necessary scaffolding and shuttering)

Prepration of primed surfaces of wall / ceiling and applying two coats of Appex paint ( Weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m and rate shall be inclusive of all necessary scaffolding and shuttering).

Preparation of old plastered/un-plastered surfaces of wall/tile/path by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of Appex paint ( Weather coat exterior paint) complete all as specified and directed.

Complete removing of existing treatment by burning off or removing paint from old steel and iron surface over 10cm width and girth of Truss, purlins and cross tie members and prepration of surfaces and applying two coat of synthetic enamle paint over a coat of red oxide primer complete all as specified and directed.(work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering).

12mm thick HDF laminate MT finish flooring/skirting over and including 2 mm thick foam sheet over a layer of polythene film sheet including taking down old exsiting flooring complete all as specified and directed.

50 mm thick (average) 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding finished faire and even including demolition of old concrete complete all as specified and directed.

Preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish complete all as specifiedand directed.

Preparation of old plastered surfaces of wall, bricks surfaces or corrugated AC sheet roofing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including removing old vegetation etc and applying one coat of cement base paint (snowcem) complete all as specified and directed

M/S S P BUILDERS

ACE BUILDERS AND CONTRACTORS

M/S RAJESH KUMAR GOYAL

VERDHMAN ASSOCIATES

Sharda Enterprises

M/s RP AGRAWAL