PROVN OF COVERED SHED FOR TREATMENT AT FD VET HOSP AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B-2 using 20mm graded crushed stone aggregate as in sub base finished even including spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

S&F colour coated GI based galvalume steel sheeting 0.5mm thick with 1.5 corrugation side lap fixed with self drilling screw in roof, wall etc. complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Supply and fixing thickness of laths 1.25 mm steel rolling shutter, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in postiion as indicated , complete push pull or manual type,complete all as specified and directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks Straight or Curved on Plan exc.any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 (External) on Fair Faces of Brick Walls or on Concrete Surfaces in Two Coats, 1st Coat of 10mm thick and 2nd Coat of 5mm thick including mixing with WPC to 2nd Coat as per Manufacturer's instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Liquied Water Proofing Compound shall be Measured and Paid separately as ‘Supply only’ under relevant Items.

Supply only liquied Water Proofing Compound, as approved, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) A1 1:2:4 (20mm graded stone aggregate) as in slab supported on wall,beam and column in floor,roof,landing,balconies,canopies,deck slab and in shelves and the like complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L rolled sections as in framing for cladding, glazing & the like fixed with angle cleats & connecting plates, etc.,complete all as specified and as directed.

S&F Steel Window with Side Hung Shutters in double shutter(glass and wire mesh) including guard bars and projecting type Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm bore waste coupling of PTMT (half or full threaded of minium weight 32-445gms), a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450 mm and fixed, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Schedule including wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 32mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

S&F gate Valve 15mm bore (dia), Fancy type, chromium plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

Cutting 100mm bore cast iron pipe and reducing to required length before laying (pipe supplied by M.D. for laying only), complete all as specified and directed.

M&L Cement Concrete 1:3:6 type C2 (40mm graded aggregate) in Surface Channels and Drains, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for PCC 1:2:4 type C1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

M&L for GI Frame Work (Size of grid 605x605mm) for Seamless Ceiling comprising of GI Perimeter Channnel 0.55mm thick with Two Unequal Flanges of 20 and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and Screws at 450 mm Centre to Centre/ Intermediate Channel 0.9mm thick having Two Equal Flanges of 15mm each and Web of 45mm suspended from Soffit at approx 900mm centre to centre with GI Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc 1.20 Metre length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm each with Lips of 10.5mm fixed to the Interme-diate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S & F for 4mm thick designer Non asbestos fibre cement building boards prepainted fixed to GI snap grid in ceiling flat complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in Section Clean sawn, secured with Nails, sectional area exc. 13 Sq Cm but not exc.25 SqCm , complete all as specified and as directed.

S&F 12mm thick Pre-laminated Particle Board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails to timber framework or with staples on snap grid, complete all as specified and as directed.

Supply only toughened Sheet Glass Sound Proof, 8mm thick, Square or Rectangular, and fixing to uPVC Door/Window Shutters, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

S&F Powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F Anodised aluminium window and ventilator shutters,fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handles, screws etc. complete all as specified and as directed. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwires as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame, handles, Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

M&L Sheet Glass, Ordinary, 4.8mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 4.8mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit and making good disturbed surfaces of Ceiling, Walls, etc. in Cement Mortar 1:3 and providing Surface Treatment so as to match the existing Finishes, complete all as specified and as directed.

Taking down the existing unservicable main TPN DB/ cut out/ DBs/Metal plug and socket enclosure of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and as directed.

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, Overhauling the fan, complete all as specified and as directed.

Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good distributed surface of walls /ceiling matching with existing colour, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant (FR) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping high grade of suitable size and its Accessories, mounted on 1.22 mm thick Sunk Mild Steel Pressed Terminal Box of suitable size duly painted with red oxide metal primer fixing/ grouting sunken/surface as per Site requirement on Wall and making good in Cement Mortar 1:3 with 3.0mm thick bakelite hylem Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no.62 but for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no.62 here in before but for One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Same Board, complete all as specified and as directed.

All as per Item no. 62 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed.

Description all as per item No 62 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed complete all as specified and as directed

S&F Socket Outlet, 2-in-1, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up,including removal old existing unsv one complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3/5 Pin, 5/15 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S& F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F Sheet Metal Enclosure MCB DB, SPN, 4-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure MCB DB, SPN, 8-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.Make:- Legrand/L&T

S&F MCB Double Pole, 32 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320C ,Havels & Legrand.)

S&F MCB SP,6-32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10320C ,Havels & Legrand.)

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Polycab.

S & F Energy saving new generation 10 watts integrated LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , including necessary connection, complete all as specified and as directed.

S&F Ceiling Fan of 1200 mm sweep AC single phase 230 volts (5 Star rating) with accessories(without regulator) including provision of 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal complete all as specified and as directed. Make:- USHA, Cat part no. Energia 5 Star or Equivalent of Bajaj/Crompton.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : Only Punned thickness of Sand Cushioning will be measured for Payment.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.00 Core, laid in trenches /surface of Wall/in GI Pipe along with Pole including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. including making good to the damaged surfaces to match as per existing surfaces, complete all as specified and as directed. NOTE : Earthwork, Horizontal Boring Road/ Foot Path, Cable Protection Pipe, Cable Joint, Mild Steel Clamps, Nuts & Bolts, etc. for fixing of Cable Protection Pipe with Pole, Wall, etc.(as required) will be measured and paid for separately under appropriate Items.

Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘light grade’ with all Fittings,in protection of cable at road crossing/hard standing/pole protection fixed with clam as per site or any other situation, complete as all specified and as directed.

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 6.0 mm dia by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed.

M&L for Sub main wiring 2x 6 Sqmm + 1x4 sqmm earth wire multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 6.0 sqmm, complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

S&F metal plug and socket enclosure 20 Amp ,3 Pin conforms to IS 8804 complete all as specified and directed.Make-L&T ,Model-DBMPS320SD or equivalent in Legrand / Schinder.

S & F Surface / wall mounted LED light fitting, box type, 230 volts with connector block including LED tube 4' & 20 watts with extruded aluminium housing povided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial gradde heavy duty driver having THD 10% complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including complete as all specified and as directed.Model :-ENDURA LINEAR NEO, ENDURALINEARNEOBS20WLED865SPCWH,Make Havells or equivalent in CG and Polycab

S & F Recess mounted LED wall washers 20W, tilted 70 degree outwards and swivels 360 degree to offer best illumination on the wall and retail displays complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED Driver, complete as all specified and as directed.Model:- SPARKLE PRO SNOOT, SPARKLEPROSNOOTDLR20W857MOD30DWHTNEEM, Make - Havells or equivalent in CG and Polycab

S & F Recess mounted Environmental friendly ,asthetically designed ,ultra modern 2X2 luminaire 28W with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver, complete as all specified and as directed.Model:- PLUTO NEO PANEL 2X2 PLUTONEO2X2PLR28WLED840S , Make:-Havells or equivalent in CG and Polycab

Refixing the existing servicable main TPN DB of any type/ capacity/ description as existing at site including making all electrical connection good the disturbed surfaces to match with the existing finishes, complete as all specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete as all specified and as directed.Make-Havells, Model- ENDURAPEARLSL15WLED757SASYTOPC or equivalent in CG and polycab.

M/S Himalayan Trading Co

M/S Krishna Construction Co.