PROVISION OF GIRLS HOSTEL AND ALLIED INFRA STRUCTURE IN SAINIK SCHOOL GHORAKHAL UNDER GE RANIKHET

Amount

SCHEDULE 'A' PART-I (BUILDING WORK)

Construction block of single living accn for 80 girls (Double Storey) including RCC static water tank of capacity 15000 ltrs for fire fighting on top of roof, complete all as specified and shown in architectural drawings. (Group-II)

Total amount of SCHEDULE 'A' PART-II-A (INTERNAL WATER SUPPLY) (For details see of Schedule 'A' Part-II-A in PDF folder)

SCHEDULE 'A' PART-IIB (INTERNAL WATER SUPPLY)

S&F brass chromium plated wall mixer fancy type for mixing hot & cold water screwed down for iron pipe suitable for 15 mm bore pipe, complete all as specified and directed.

S&F brass chromium plated central hole wash basin mixer, fancy type with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nut capstan head screwed for iron pipe suitable for 15 mm bore pipe, complete all as specified and directed.

Total amount of SCHEDULE 'A' PART-IIIA (INTERNAL ELECTRIFICATION) (For details see of Schedule 'A' Part-III-A in PDF folder)

SCHEDULE 'A' PART-IIIB (INTERNAL ELECTRIFICATION)

M&L for point wiring (concealed) complete using 1.5 Sqmm cross sectional area, PVC insulated unsheathed FRLS (ISI 694 marked) with valid CML No. copper conductor, stranded cable upto and incl working voltage 1100 volts grade, PVC conduit 'medium grade' ISI marked with fittings such as bend, tee, junction boxes elbows etc including pressed steel terminal sunken boxes of 1.2 mm thickness with 3mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and unsheathed copper conductor cable earth continuity wire connetctd to DBs/sunken boxes/fittings of size 1.5 Sqmm cross sectional area conductor and all other metal parts with earth dolly, complete all as specified and directed for the following:-

One light point controlled by one switch 5/6 Amp

One exhaust fan point controlled by one switch 5/6 Amp

One 5/6 Amp socket point controlled by one switch on the same board.

One 5/6 Amp socket point controlled by one switch independent board.

One bell/buzzer point controlled by one push button switch.

One light point controlled by two way switch.

M&L for point wiring (concealed) using 2.5 Sqmm cross sectional area, PVC insulated unsheathed copper conductor, stranded cable, upto and incl working voltage 1100 volts grade, PVC conduit,medium grade ISI marked with fittings such as bend, tee, junction boxes elbows etc including pressed steel terminal sunken boxes of 1.2 mm thickness with 3 mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and 2.5 Sqmm cross sectional area, PVC insulated unsheathed copper conductor as earth continuity wire connetctd to DBs/sunken boxes/fittings and all other metal parts with earth dolly for one 15/16 Amps socket outlet point on Independent board, complete all as specified and directed.

Supply & Fixing Lamp holder/Batten holder with PVC/Polycarbonate body angular/straight fixed on plastic laminated sheet cover round shape 3 mm thick including 01 No LED filament lamp 9/10 W suitable for 230 V complete all as specified and directed.

Supply and fixing Vertical load line type TPN DB, 8 way, as per IS - 8623, IP-43 protection, universal mounting with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCCB TPN 125 Amp as incomer and TP & SP MCCB/MCBs 40/63 Amps as outgoing complete & making necessary electrical connection for incoming and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed.

M&L for distribution board SPN, double door 8 way for mounting MCBs/Isolators/ELCBS etc factory made conforming to IS: 13032 fabricated out CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link 200 Amps rated copper bus bar, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion, double door type with hinged & locking arrangement, flush to wall, IP-42 protection and label marking of incoming and outgoing circuit on all wayscomplete all as specified and directed. (Note:- DBs and MCBs/ISOlators etc shall be of same make)

M&L for distribution board, SPN, double door 4 way for mounting MCBs/Isolators/ELCBS etc factory made conforming to IS: 13032 fabricated out CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link 200 Amps rated copper bus bar, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion, double door type with hinged & locking arrangement, flush to wall, IP-42 protection and label marking of incoming and outgoing circuit on all wayscomplete all as specified and directed. (Note:- DBs and MCBs/ISOlators etc shall be of same make)

S&F minature circuit breaker single pole, 240 volts and 6 to 32 Amps current rating , B Series, 10 KA complete all as specifed and directed.

S&F MCB single pole & neutral, 240 volts and 40 Amps current rating , breaking capacity 10 KA, 'C' series, complete all as specifed and directed.

S&F MCCB four pole 125 Amps current rating , 415 volts, breaking capacity 16 KA complete all as specifed and directed.

M&L for sheet metal enclosure single pole and neutral with one 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F blanking plate complete all as specifed and directed.

Sub main wiring with 2 run, single core 4 sqmm, PVC insulated PVC unsheathed FRLS (ISI 694 marked) with valid CML No. stranded copper conductor cable in and including PVC concealed/surface conduit, 25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including one run extension earth wire with 4 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. (Note :- Three run of 4 Sqmm copper cable will be measured as one unit).

Sub main wiring with two run, single core 10 sqmm, PVC insulated PVC unsheathed FRLS (ISI 694 marked) with valid CML No. stranded copper conductor cable current carrying in and including PVC concealed/surface conduit, 25 mm or higher dia. ISI marked, medium grade with all conduit accessories/ fittings including one run 10 Sqmm single core PVC insulated, unsheathed copper cable as earth continuity fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. (Note :- Two run of 10 sqmm copper cable current carrying and one run of 10 Sqmm as earth continuity will be measured one unit).

Supply and fixing surface and wall mounted LED batten light fitting 230 volts, extruded aluminium housing provided for efficeint dissipation with polycarbonate diffuser amd integrated electronic driver with industrial grade heavy duty having THD<10% , ultra glass LED with very high efficeincy suitable for installation in existing T-8 fitting with G13 lamp holder, high lument output, PF>0.98, neutral white 20 watt 4 ft light fitting with lamp etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor 1.5 sqmm cable wire, complete all as specified and directed. Make- Havells Cat Part No. LHEXACP7IN1J020/Make-Crompton Cat Part No. LSTLN-20 CDL/ Make-Wipro, Cat Part No.LL20-221-XXX-65NE3

Supply & fixing building decorative ultra slim aluminium LED light fitting 35/36 Watt with high lumen output environmental freindly energy efficeint ready to use high voltage protection upto 440 volts with pressure die cast aluminium housing, heat resistant toughened glass, IP-66 protection and impact resistance of IK07 with 10 KV buit in surge protection device, better optics distribution with integrated electronic driver including connection up with three core copper conductor 1.5 sqmm wire from ceiling rose to connector of street light complete all as specified and directed. Make- Havells Cat Part No. ENDURACITYLITEPLAT PLUSSL 35W LEO757/ SASYBOPC/Crompton Cat Part No. LSts-36-CDL-M/ MAKE-WIPRO Cat Part No. LR03-501-XXX-57/ MAKE-PHILIPS Cat Part No. BRP052 LED 036 CW HP SLA FG S1 PSU GR/ MAKE- C&S Cat Part No. LTESST36WLED/LS.

S&F bulk head LED light fitting 1X9W/10W LED with lamp including LED driver holder and connection wire three core copper conductor etc. complete all as specifed and directed. Make - Havells Cat Part No.HEXAFT 10W LED857SSTMBPOC / Make-C&S Cat Part No.e-TATRA/10W / Make-Crompton Cat Part No.LMHE-10-CDL

S&F LED Mirror light fitting 10 watt, 230 volts decorative type with high output diffuser 2 ft, with driver holder including LED lamp complete all acessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specifed and directed. Make - Havells Cat Part No.LUMILINEPLUSBS 10W LED865SPCSS / Make-C&S Cat Part No.LTTB2F 10WLED/W / Make-Crompton Cat Part No.LDLL-10-CDL

S&F GI pipe 'light grade' wall/pole mounting bracket of size 40 bore and 1.50 m long fixed to wall with and including nut, bolts and GI clamps of size 50x4 mm as required including two coats of synthetic enameled paint over a coat of primer, complete all as specifed and directed.

S&F exhaust fan energy saving 3 star rated, 300 mm sweep Metallic body with louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

M&L for earthing completed with galvanized mild steel earth plate (electrode)600 x600x6.00 mm thik burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcole dust mixed with salt ot a packed thickness of 15 cm all round the plate, using 4 mm dia GI wire as earth wire moulded and riveted to earth plate at one end and connected to main switch/control switch of the building at another end, GI earth wire incased in and including 15 mm dia GI "light grade' pipe from upper end of earth plate upto main switch/control of the building, including 20 mm bore GI pipe 'light grade' as watering pipe from earth chamber to upper edge of earth plate, CI funnel with wire mesh fixed on water pipe and provision of PCC chamber and RCC pit cover with lifting handle, excavation earthwork including laying of GI pipe concealed in floor/ walls all as described in electrical plate No 3 of SSR Part-I, complete all as specified and directed.

Total amount of SCHEDULE 'A' PART-IV (SITE CLEARANCE AND EARTH WORK) (For details see of Schedule 'A' Part-IV A in PDF folder)

Total amount of SCHEDULE 'A' PART-V (RCC RETAINING WALL/PROTECTIVE WORK) (For details see of Schedule 'A' Part-V in PDF folder)

Total amount of SCHEDULE 'A' PART-VI A (SEWAGE DISPOSAL) (For details see of Schedule 'A' Part-VI A in PDF folder)

SCHEDULE 'A' PART-VIB (SEWAGE DISPOSAL )

Construction of Septic tank for 100 users excavation in any type soil, foundation in PCC 1:2:4, brick work using kiln burnt sub class 'B' bricks in cement mortar 1:4 and slab covers including RCC precast manhole covers having 6mm plate embeded all around/fibric reinforced cover with angle iron frame vent shaft and sludge chamber etc complete all as shown in drawing No.TD/217 sheet 1/1 to 7/7 and specified.

Construction of Soakage well of size 3.60 mtr dia and 4.50 mtr effective depth, excavation in any type soil, foundation in PCC 1:3:6, brick work in walls of Honey combed and solid using sub class 'B' bricks in cement mortar 1:4, including RCC cover slab in M-25 and filling with brick bats, complete all as shown in drawing No.TD/309 sheet 1/4 to 4/4 and specified.

Total amount of SCHEDULE 'A' PART-VIIA (EXTERNAL WATER SUPPLY) (For details see of Schedule 'A' Part-VIIA in PDF folder)

SCHEDULE 'A' PART-VIIA (EXTERNAL WATER SUPPLY)

M&L for construction of brick masonry pit chamber of internally size 900mm x 900mm x 900mm with angle iron frame of sizes 40mm x40mm x4mm and 3.15mm thick mild steel plate cover painted with two coat of synthetic enemelled paint over a coat of red oxide primer after preparation of surface including locking arrangement and necessary excavation and earth work in any type of soil, 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate over 100 mm thick hard core using broken bricks in foundation, brick work in cement mortor (1:6) and 15mm thick cement plaster in cement mortor 1:4 in internal surface of walls and outside upto 150 mm deep below ground level complete all as shown in TD drawing and specified.

Total amount of SCHEDULE 'A' PART-VIIIA (EXTERNAL ELECTRIC SUPPLY) (For details see of Schedule 'A' Part-VIIIA in PDF folder)

SCHEDULE 'A' PART-VIIIB (EXTERNAL ELECTRIC SUPPLY)

Supply, erection and fixing of steel tubular swaged poles complete with mild steel base plate size 300mmx300mm & 6 mm thick welded to bottom of pole, finial taper plug, bolts, nuts and screws type 410 SP-31, 09 metre long complete including factory painted with two coat of black bitiminous paint internally through out and externally on embedded portion of pole and painting with two coat of aluminium paint over one coat of red oxide primer on remaining exposed surface after erection of pole in position, all as specified and directed. (Note:- Earth work and foundation concrete shall be measured separately)

Supply & fixing bracket made out of 40 mm bore GI pipe 'light grade' bent to shape 900 mm long fixed with mild steel clamps and nut & bolts complete all as specified and directed.

Supply & fixing LED security light 36 Watt luminaire fitting, pressure die cast aluminium housing, heat resistant toughened glass, IP-66 protection and impact and corresion resistant including thermal management in multiple optics distribution with integrated electronic driver and connecting up with three core copper conduct0r 1.5 sqmm wire from junction box to connector of street light complete all as specified and directed. (Make - Havells Cat Part No.LSTS-36-CDL-M / Make-C&S Cat Part No.LTESSI36WLED/W / Make-Crompton Cat Part No.LST-36-CWMRSIPSUGR)

Material and labour for earthing wth galvanised cast earth plateof size 600x600x6mm thick burried vertically in ground to a depth not less than 2.25mtr below GL with top edge of earth plate not less than 1.5mtr below GL the earth plate surrounded by adequate quantity of charcoal dust and salt all as around as earth plate 15 cm by and GI earth wire 4mm dia as earth conductor, bolts and rivetted to earth plate one end protection with GI pipe light grade 15mm bore upto 2.4mtr on pole with flat iron clamp nut bolt complete earth work water pipe from earth chamber to earth plate, CI funnel with wiremess fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pitcover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bar 6mm dia @150cc both ways with 10mm dia MS bar in lifting handle excavation earthwork including laying of GI pipe in walls etc all as directed in electirical plate No 3 of SSR Part-I complete all as specified and directed.

S&F pole box factory made size 100mm x 200mm x 80mm made out from 1.6 mm thick mild steel sheet powder coated complete with 3 Nos copper bus bar 15 Amps of size 20x3mm fixed on porcelain supports with hinged front cover with locking arrangement fixed to 1.2 mtr from bottom of the electric pole by means of including 6 Amps MCB clamps of MS flat iron 25 x3mm with bolts and nuts complete all as specified and directed.

SCHEDULE 'A' PART-IXB (CC TV SYSTEM)

Supply, installation, testing and configuring/ programming of bullet type IP full HD night vision surveillance camera with following specifications on the wall surface / ceiling / efisting pole including 128 GB SD Card complete etc as required. (i) Megapifel: Not less than 5 MP (ii) Image Sensor: 1/2.9" Progressive Scan CMOS (iii) Optical lence : 2.8mm to 12mm Vari-focul (iv) Frame Rate: 20fps (2944 f 1656) (v) Video Compression: H.265+/H.265/H.264+/ H.264 (vi) No of streams: 3 Nos (vii) Wide Dynamic Range : 120dB (viii) Power Supply: PoE / 12 VDC (ix) IR Distance: up to 50 meters (x) Ingress protection: IP67 (xi) Impact Protection: IK10 (xii) Network Storage Slot : Supports upto 128GB MicroSD Card (xiii) Network interface: 1 f RJ45 10M/100M (xiv) Certifications: UL listed, CE (xv) Day/Night Functionality : IR cut filter with auto switch

Supply, installation, testing and configuring /programming of Dome Type IP full HD night vision surveillance camera with following specifications on the wall surface / ceiling / efisting pole including 128 GB SD Card complete etc as required. (i) Resolution: Not less than 5 MP (ii) Image Sensor: 1/2.9" Progressive Scan CMOS (iii) Optical lence : 2.8mm to 12mm Vari-focul (iv) Frame Rate: 20fps (2944 f 1656) (v) Video Compression: H.265+/H.265/H.264+/ H.264 (vi) No of streams: 3 Nos (vii) Wide Dynamic Range : 120dB (viii) Power Supply: PoE / 12 VDC (ix) IR Distance: up to 50 meters (x) Ingress protection: IP67 (xi) Impact Protection: IK10 (xii) Network Storage Slot : Supports upto 128GB MicroSD Card (xiii) Network interface: 1 f RJ45 10M/100M (xiv) Certifications: UL listed, CE (xv) Day/Night Functionality : IR cut filter with auto switch

Supply, installation, testing and configuring /programming rack mountable dual OS Network Video Recorder having following features suitable for operation on 240V, 50Hz AC power supply including terminations with end connectors etc as required. Make -Hikvision/ Honeywell/UNV/Bosch. (i) IP video input: 64 IP channels (Upto 12MP Resolution) (ii) Video Compression: H.265+/H.265/H.264+/ H.264 (iii) HD Video Output: HDMI1/VGA1 and HDMI2/VGA2 (iv) Decoding formats: H.265+/H.265/H.264+/ H.264 MPEG4 (v) Decoding capability: 2-ch @ 12 MP / 4-ch @ 8 MP / 8-ch @ 4 MP/16- (vi) Hard Disc: 8 SATA hot swappable interfaces for 8 HDDs (vii) Capacity : up to 10TB for each HDD (viii) Disc Array: 4 Nos RAID0, RAID1, RAID5, RAID6, RAID10, (ix) Network interface: 2 f RJ45 10/100/1000 Mbps (x) Certifications: ONVIF compliant, UL listed, CE, RoHS

Supply, installation, testing and configuration of 4 TB Surveillance Hard Disc Drive in the efisting NVR (per NVR 4 f 4TB HDD) with all accessories complete etc as required. Make : Segate / Western Digital

Supply, installation, testing and configuration of UL Listed PoE Gigabit switch of 8 x 10/100/1000Base T -PoE Ports with 2 f 100/1000 Mbps SFP port to connect the cameras and eftend it to the other PoE and NVR including end termination with terminal connectors and power supply adopter complete etc as required. (Make : Netgear/CISCO/HP)

Supply, installation, testing and configuration of UL Listed PoE Gigabit switch of 24 f 10/100/1000Mbps PoE Ports with 2 f SFP port to connect the cameras and eftend it to the other PoE and NVR including end termination with terminal connectors and power supply adopter complete etc as required. (Make : Net gear/CISCO/HP)

Supply, installation, testing and configuration of UL Listed 8-Port Gigabit Unmanaged Desktop PoE Switch including end termination with terminal connectors and power supply adopter complete etc as required. (Make : Net gear/CISCO/HP)

Supply, installation, testing and configuration of 12 port LIU Loaded (Wall / Rack Mounted) with Single mode SC-SC adaptors, SC Pigtail for optic fiber cable, Splice trays and splice protectors including OFC slicing and end termination etc complete as required . (Make : Tyco/D-Link/Cisco/HP)

Supply, installation, testing and configuration of Single mode 10/100/1000(Gigabit) Media converter including end termination with terminal connectors, OFC Slicing and power supply adopter complete etc as required. (Make : Net gear/D-Link/CISCO/HP)

Supply, installation, testing and configuration of Single mode SFP Uplink Module for distance upto 10KM including end termination with terminal connectors and OFC Slicing complete etc as required. (Make : Net gear/D-Link/CISCO)

Supplying and fixing of following size powder coated wall/floor mounted type AV Equipment rack with top and bottom cable entry including power manager, selves and standard accessories complete etc as reqd. (Make : HCL/D-Link/Netrack) (a) 6U Rack

Supplying and fixing of following size powder coated wall/floor mounted type AV Equipment rack with top and bottom cable entry including power manager, selves and standard accessories complete etc as reqd. (Make : HCL/D-Link/Netrack) (b) 42U Rack (with Cooling Fans - 2 Nos)

Supply, installation, testing and commissioning of 55" Professional 24 x 7 LED Display with 4K UHD, HDMI, USB including wall mounting kit (as per OEM) complete etc as required

Supplying and fixing of following size outdoor type PVC junction bofes (IP66) on the efisting CCTV Poles and wall surface including fifing accessories etc as required (a) 100mm f 100mm f 70mm (Make : Hensel /GEWISS / tyco )

SITC of Fiber Terminal Bof complete on the efisting wall / surface with accessories including necessary splicing, jointing, termination etc as required. Make : Tyco / RPG

Supplying and drawing of ready made 10 Mtrs Long HDMI Cable on surface/ in the efisting Pipe / false ceiling including termination on both the ends etc as required (Make : NT / Extron / Kramer)

Supply and Laying of following core single mode armoured fiber optic cable in the efisting DWC PIPE / in trench / on wall / in CMS / in U rack connection including slicing and termination where ever required etc, complete as required for (a) 12 F Core Make : Finolex / LAPP / D Link /Polycab

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the efisting surface/ recessed Steel/ PVC conduit as required. (1 run of cable)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the efisting surface/ DWC Pipe / CMS/ PVC conduit as required. (a) 1.5 sqmm 3 core flefible cable

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including efcavation and refilling the trench but efcluding sand cushioning and protective covering etc., complete as required. (a) 40 mm dia (OD-40 mm & ID-32 mm nominal)

Supplying and fixing 25 mm dia PVC conduit of medium grade along with accessories in surface/recess including cutting chases into wall and making good the same in case of recessed conduit as required.

Supply, installation, testing & commissioning of 600VA Online UPS etc as required Make : UPS - Numeric / APC / Emerson

SCHEDULE 'A' PART-X (FIRE FIGHTING)

Supply and fix CO2 fire extinguisers 4.50 Kg capacity with safety valve as per ISI:15683 marked, complete all as specified and directed.

Supply and fix DCP type fire extinguisers 6.50 Kg capacity with safety valve as per ISI:15683 marked, complete all as specified and directed.

Supply and fix fire bucket with colour coding, complete all as specified and directed.

Supply and fix First Aid hose reel all as specified and directed.

Note : Tenderers may note that amount of credit Rs 6875.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Anil Kumar Gupta

Prem singh kuwarbi and co