Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.2 L
EMD Value
₹18,500
Closing Date
15 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GENERAL MANAGER
AMMUNITION FACTORY KHADKI, PUNE-411003
REPAIRS TO FLOOR, DRAIN AND REPLACEMENT OF AC SHEET AT WASHING UNIT AREA OF C3 SECTION AT AFK.
2023_MIL_141476_1
GM/AFK/EO/DC/970/2022-23
Open Tender
Civil Works
Item Rate
150 days
AMMUNITION FACTORY KHADKI
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹18,500
25 Mar 2023
13 Jan 2023
17 Feb 2023
13 Jan 2023
15 Feb 2023
13 Jan 2023
Amount
Dismantling existing asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
Dismantling expanded metal not exc 4 kg, any thickness or mesh, fixed with steel or wood fillets, if any
Dismantling structural steel work including doors, gates/ rolling shutters but excluding framed truss etc.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Demolition of brickwork/ fire brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Taking up or down steel tubing and connections 40 or 50mm bore, including cleaning for refixing or removal to store
Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, hard/ dense soil
Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40mm graded aggregate)
Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq. cm but n exc 400 sq cm
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour to be used in valley gutter and roof covering having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make - TATA/JSW/ESSAR
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and set in cement mortar 1:6, Type C1 1:3:6 (20mm graded aggregate) complete
S&F Welded steel wire fabric supplied and fixed complete to wood or steel members not exc 4 kg.
S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W (Gde E-250) quality-A
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality-A
S&F of steel Turbo Ventilators of fan diameter 600mm with base
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/ dense soil.
M&L for Hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the surface even and smooth without using extra cement.
M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
M&L for Cement concrete type B- 2,1:2:4 (40mm graded aggregate) 100mm thick
M&L for screed bed or bedding layer of mortar 25mm thick for laying floor finishes in CM 1:4
M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors
M&L for 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes 20mm (outer dia) SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
S&F of PP-R Gate valves 20mm (outer dia) (brass insert) as per requirement of the site
M&L for laying Concrete bed to drain pipes in cement mortar 1:3:6 Type C-2 including packing under, and haunching against the sides of pipes after they are laid and tested; in bore of pipe 150mm.
Supplying and laying of CPVC schedule 40 pipes & Plain CPVC schedule 80 fittings in trenches complete all as specified. Inner diameter of pipe 150mm.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.
Removing excavated material (rocks) exc. 1.50 km but n exc. 5 km and depositing where directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc.
Point wiring in PVC conduit for one light point or one fan point controlled by one switch with PVC insulated stranded copper conductor cables (FRLS) 1.5 sq. mm size including material and labour. Make of wire - Polycab/Finolex/ KEI/RR Kabel & PVC Conduit- Diamond/Pressfit (medium gauge) only.
Point wiring with stranded copper conductor in PVC Conduit for one 3 pin socket outlet, 5 Amps independent, with cables of 1.5 sq. mm size including material and labour. Make of wire - Polycab/Finolex/ KEI/RR Kabel & PVC Conduit- Diamond/Pressfit (medium gauge) only.
Point wiring with stranded copper conductor in PVC Conduit for one 3 pin socket out let 5Amp on the same board with other switches with cable 1.5 sq. mm size including material and labour. Make of wire - Polycab/Finolex/ KEI/RR Kabel & PVC Conduit- Diamond/Pressfit (medium gauge) only.
Supply and fixing of Celling rose, 3 phase, PVC/Polycarbonate, Isolated body. Make- Anchor /Legrand/Havell's/ L&T only.
Supply and fixing of piano switch, flush type, single pole, 1-way, 6A. Make- Legrand/Anchor /Havell's/L&T only.
Supply and fixing of switch socket combination, 2 in 1, 3 pin, 6Amp. Make- Legrand/Anchor /Havell's/L&T only.
Hanging only Ceiling fan and connecting up including provission of cable from celling rose or connector to fan.
Wiring for circuit/sub main wiring along with earth wire with 2 x 4 Sq. mm + 1X4 sq. mm earth wire sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit including material and labour. Make of wire- Polycab / Finolex/KEI/ RR Kable only.
Supply and fixing of sheet metal encloser, single door MCB DB, 240V single phase, neutral, 2-way with 200 Amp rated busbar. Make - Legrand/Indo asian/Schneider/ABB/ L&T only.
Supply and fixing of isolator (MCB, C-Type, 10kA), DP, 240V, 40 Amp. Make - Legrand/ Indoasian/ Schnider/ABB/L&T only.
Supply and fixing LED tube light fitting 20 W, 220V, 4 feet strip type, complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make- Philips/Bajaj/Crompton/Syska only.
Supply and fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip.
Excavation in trenches n exceeding 1.5 m wide and n exceeding 1.5 m depth and getting out in Hard soil.
Excavation in trenches n exceeding 1.5 m wide and n exceeding 1.5 m depth and getting out in Soft rock.
Excavation in trenches n exceeding 1.5 m wide and n exceeding 1.5 m depth and getting out in Hard rock by using pneumatic concrete breakers, chisels etc. and not by blasting.
Earthing complete with galvanised iron earth plate electrode 60X60cmX6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI earth lead strip of size 25X4 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.
Supply and fixing of galvanized tubes medium grade 15mm bore.
Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.
Rendering 10mm thick on fair faces of brickwork or concrete surface in cement plaster 1:4.
Cast iron work grade FG 150 unmachined , in brackets ,gully traps, grating railings , frames ,manhole covers , fire and soot doors, dampers, stop valve boxes, gate stops, part of ranges balusters and similar articles including material and labour for use in earth pit cover and articles not exc 5 kg each.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm above ground level in hard dense soil.
Dismantled mild steel member, wrought iron (of any description) obtained from dismantling.
Old AC Sheet obtained from dismantling
M/S Hrushikesh A. Patil
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .