Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.0 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹9.1 L+₹8,320.35 (0.92%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹9.4 L+₹32,360.09 (3.58%)Rejected-AOC | 3 | Rejected-AOC L3 | |
| 4 | 4₹9.5 L+₹42,566.30 (4.71%)Rejected-AOC | 4 | Rejected-AOC L4 | |
| 5 | 5₹9.6 L+₹54,381.42 (6.02%)Rejected-AOC | 5 | Rejected-AOC L5 |
Tender Value
₹9.5 L
EMD Value
₹26,490
Closing Date
22 Mar 2022, 12:00 pmClosed
Assistant Engineer
LSGD Section,Ulikkal Grama Panchayath
Project No. 336/22 , Construction of building for Thumboormozhi rack model for solid waste management
2022_LSGD_481898_2
AE/LSGD/UGP/eT/2021-22(5)
Open Tender
Civil Works - Buildings
Item Rate
180 days
Ulikkal Grama Panchayath
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,596
Yes
₹26,490
Yes
9 Jun 2022
15 Mar 2022
25 Mar 2022
15 Mar 2022
22 Mar 2022
15 Mar 2022
Amount
New Construction
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
od1696510/2021_2022 : Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
od1696511/2021_2022 : Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
od1696512/2021_2022 : Providing alu-zinc sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with bitumen and gi limpet washers or with gi limpet washers filled with white lead and including coat of approved steel primer and two coats of approved paint on overlapping of sheets complete up to any pitch in horizontal vertical or curved surface excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever req;uired .4mm thick alu-zinc sheet.
od1696635/2021_2022 : Providing ridges or hips width 60 cm overall width plain Alu Zink sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.<br>0.40 mm thick with zinc coating not less than 275 gm/m2
od1696513/2021_2022 : Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.<br>0.50 mm thick with zinc coating not less than 275 gm/ m2
12.41.1 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
12.42.1.1 : Coupler75 mm
12.42.5.1 : Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5<sup>0</sup>75 mm bend
12.43.1 : Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
JOSE V S
UNIVERSAL BIOGAS
NEERAJ RAJ
KS JOSEPH
Bidder Name
N.V.SURENDRAN
KS JOSEPH
NEERAJ RAJ
JOSE V S
UNIVERSAL BIOGAS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_692470.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .