Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹4.3 L+₹8,319.22 (1.97%)Rejected-AOC | L2 | Rejected-AOC HIGHEST |
| Sl No | Description | Qty | Unit | T V Rajendran L1 | SHINE T R L2 |
|---|---|---|---|---|---|
| 1.00RENOVATION OF PREMETRIC HOSTEL | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 6.28 | cum | 257.63 ₹1,617.92 Lowest | 262.78 ₹1,650.26 |
| 1.00 | OD377754/2025-2026:Dry rubble masonry with hard stone in foundation and plinth | 4.71 | cum | 3,063.22 ₹14,427.77 Lowest | 3,124.48 ₹14,716.3 |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.31 | cum | 9,963.93 ₹3,128.67 Lowest | 10,163.21 ₹3,191.25 |
| 1.00 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 0.63 | sqm | 961.24 ₹603.66 Lowest | 980.46 ₹615.73 |
| 1.00 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 3 | cum | 7,691.45 ₹23,074.35 Lowest | 7,845.27 ₹23,535.81 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 15 | sqm | 369.76 ₹5,546.4 Lowest | 377.15 ₹5,657.25 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.27 | cum | 9,235.97 ₹2,493.71 Lowest | 9,420.68 ₹2,543.58 |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 100 | kg | 230.93 ₹23,093 Lowest | 235.54 ₹23,554 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 366.8 | kg | 187.05 ₹68,609.19 Lowest | 190.79 ₹69,981.01 |
Tender Value
₹4.2 L
EMD Value
₹10,582
Closing Date
12 Mar 2026, 10:00 amClosed
ASSISTANT ENGINEER
OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, LID AND EW SUBDIVISION,NEDUMKANDAM
Maintenance and renovation of SC Pre-Metric hostel
2026_LSGD_842807_2
24T/AEE/LID EW/NDKM/2025-26
Open Tender
Civil Works - Buildings
Item Rate
45 days
NEDUMKANDAM
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,582
Yes
17 Jun 2026
3 Mar 2026
13 Mar 2026
3 Mar 2026
12 Mar 2026
3 Mar 2026
RENOVATION OF PREMETRIC HOSTEL
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
OD377754/2025-2026:Dry rubble masonry with hard stone in foundation and plinth
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore
50.18.7.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall
17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall
13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
OD410591/2025-2026:Supplying and fixing pvc door
OD412302/2025-2026:ROOFINF WITH GI TRAFORD SHEET 0.35,, THICK POWDER COATED WITH OVERLAPS OF 150MM AT ENDS AND SS SCREWS INCLUDING PLAIN WASHERS AND BITUMEN WASHERS ETC COMPLETE
OD410669/2025-2026:Providing and fixing of good quality granite name board with lettering including of all cost ,conveyance , labour charges etc complete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_1422372.xls
BOQ • 0.31 MB
RENOVATIONHOSTELSBD.pdf
Tender Documents • 1.76 MB
TIME.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .