Loading…
Loading…
Tender Value
₹18 L
EMD Value
₹45,000
Closing Date
3 Sept 2026, 10:30 pm7d left
Directorate of Municipal Administration
S M TIPPU
8217070907
Providing Electrification to MRF and Waste Segregation Building at SWM Site in Kamalapura TMC Limit
DMA/2026-27/EL/WORK_INDENT61873
DMA/2026-27/EL/WORK_INDENT61873
Open
Electrical
Two Tender Document System(Two Cover)
DMA Town Municipal Council Kamalapur
1 document required · 1 mandatory
Department Registration DetailsTo qualify for award of this contract each tenderer in its name should have in the Last five years i.e 2021-22 to 2025-26 mandatory Satisfactory similar nature of work done 50 percent of total cost of works certified by not below the ranking of Executive Engineer to extend of Rs 9.00 lakhs
The bidder shall possess and upload a valid General Electrical Contractor Licence issued by the Electrical Inspectorate, Government of Karnataka.
Scan copies of original documents of GST Registration certificate
To qualify for award of this contract each tenderer in its name should have in the last five years i.e 2021-2022 to 2025-2026 Achieved in at least TWO financial years an average financial turnover of Rs18.00 lakhs Certified turnover certificate issued by the Chartered accountant with UDIN number attach certified balance sheet and profit loss statement
Liquid assets and or availability of credit facilities of not less than amount Rs.5.40 Lakh
PAN Card
₹500
₹45,000
25 Aug 2026
25 Aug 2026
4 Sept 2026
28 Aug 2026
Providing Electrification to MRF and Waste Segregation Building at SWM Site in Kamalapura TMC Limit
Open Conduit System : Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs ...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supply of 100 Watt LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mould...
Fixing halogen/metal hallide/SVL/IL/LED flood light fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (114/17.5)( Page No 56 I no11.9.4)
Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron … and M.S. flat …. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Common SR Vol-6(PWD ELE) Page No 19 I no 5.38)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket (Page No 09 I no 3.6.10)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch (Page No 09 I no 3.6.7)
Supply and fixing of 16A Industrial Plugs
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plateswithdue groove cutting inBrick/C.Cwall, including necessary rawl plugs, Machine/NF sc...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos. ofmachine screws, bolts nuts etc., complete on the existing met...
Supply of 70 W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
Supplying and Fixing of.mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall usi...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (P No 56, I No13.5 )
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phases eparators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phases eparators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 A 4 pole (Page No 13 I no 5.20.4)
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials, and C Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking cap...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials, and C Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking cap...
Supplying and fixing of 100 Amps Porcelain fuse channel with cut out on existing wooden / panel using necessary nuts, bolts, and washer etc., complete. 100 A (Page No 14 I no 5.7.4)
Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which arem...
Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which arem...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3phase, 4wire LT network with IP...
Supplying, fixing, wiring, earth electrode for grounding conduits,I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit.The pit should be...
Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. (Page ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. (Page ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 to 95 Sqmm, ( Page No 52 I no 21.06)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw1 Bid Document 61873.doc
Tender Document • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].