T-46/EDCP/2023-24

Amount

Carriage of following line material from Store centre-Pilibhit to site including measuring, weighing, loading, unloading at both ends and proper stacking at safe site under EDD- Pilibhit. (Distance up to 30 Km.)

PCC Pole 8.5 mtr. Long

ST Pole 11 mtr. Long

Top channel

Earthing rod

Disc insulator

11 KV polly pin isulator

Stey set

Stey wire

Gi Wire

11 KV X-arm

Gurading angle

ACSR weasel conductor

Three phase Distribution Box with clamp

LT AB Cable of size (3x95) SQMM

Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing.

Single support of PCC pole 8.5 mtr long.

Single ST Pole 11 mtr. Long.

Double pole structure ST Pole 11 mtr. Long complete with bracing.

Shifting of transformer from exiting DP to new constructed DP

Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Laying and sagging of 3 phase ACSR Weasel conductor from double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.

Laying of LT ABC (3x95) SQMM for 11 KV L.T Line.

Earthing of ST & PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Guarding of LT line road/River crossing etc. by providing G.S earth wire 7/16 S.W.G/G.I. wire no. 8/10 and making net with different of 1 meter completely including fixing of channel/Angle etc. with proper locking at each support. All type of nut and bolt would be given by the contractor (G.I. wire will be provided by the department.)

Fixing of 3 Phase distribution box on pole including proper clamping. All material would be provided by firm except distribution box.

Dismantling of exixting cable/conducting of line & its related all accessaries etc. and received back material carriage from work site to store centre, Pilibhit with loading & unloading and proper stacking. (Distance up to 30 Km.) Complete work in all respect.

Providing and fixing of stay clamp

Providing and fixing of x-arm clamp

Providing and fixing of F clamp

Providing and fixing of I Hook with suspension clamp

Providing and fixing of M.S nut bolt off size

Providing and fixing of IPC Connector

Providing and fixing of Dead end clamp

Providing and fixing of danger board

Providing and fixing of PG clamp

Providing and fixing of barbed wire

Providing and fixing of M.S. Angle brazing set

Providing and fixing of M.S. Angle brazing set clamp

Providing and fixing of Stone Pad

Providing and fixing of Guarding angle clamp

Providing and fixing of LT Clamp

Providing and fixing of Shackle Insulator

ASTHA TRADERS

M/S HINA ELECTRICALS