Work of Corrosion repair and Final Passing activities of POH due ICF/BEML/NMG/NMGH/NMGHS Coaches as per scope of work at CR Fitting Shop Northern Railway Jagadhri Workshop for 24 Months

A-360 ICF/BEML coaches for 24 months 6382390.24 Below/P

Repl. Destination board Bkt./umber Bkt. Modification

Storm cornice cutting , fitting & welding

Patch roof H.R.R.2'6"/3'-03",6"9"x1/16"

Roof ventilation and roof testing to full coach

Body patch setup in size 5'6''x1'10'' cutting fitting welding & Grinding

Body patch setup in size 3'x1'10''

Body patch setup in size 1'10''x1'10''

Body patch setup in size 10''x 10''

End Patch half round Cutting fitting and grinding welding

Hand rail Patch cutting fitting welding & Grinding

Foot step hanger plate set weld & Grinding

Foot step plate cutting , fitting , welding

Strip & fit End Piller

Strip & fit Turn under both side

Door Angle Strip & Fit

Strip, Fit & grinding Reflector

Strip, Fit & grinding Tail Lamp

Mfg. & Fit Rest Angle

Door Pivot Replace

Door Pivot Patch

Strip & Fit Door Angle Pivot

Cutting , fitting, welding & grinding of Roof patch 13''x13''

Cutting , fitting, welding & grinding of Roof patch 2''x8''

Cutting , fitting, welding & grinding of Roof patch 4''x8''

Stripping, fitting, welding & grinding Roof Ventilator

Luggage door Rail Striping Strenthing & Fitting

Luggage Rod MFD & Fitting

VPH End Door Repair (Strip one end door ,folding straightened and refit in position (in two pieces )

Cutting , fitting, welding & grinding Window Patch 2''x8''

Stripping & fitting Fall plate Base

Fabrication Hasp & Staple for sliding Door

Stripping & fitting Sliding door lock arrangement

To strip Lav angle frame and fit Welded new each Lav

Repl. of corroded channel under Lav. Floor /each

Floor Support Channel Replacement/Each

Strip & fit partition piller Bkt./each

New partition fabrication and fitting in ICF coaches

Allowed time for Dustbin modification work on coach/each

Strip & fit including welding Door way plate cutting, shaping & fitting (ICF coaches)

Luggage Door Strip each

Striping, Fitting &welding U Base channel upper & lower of sliding door

Inlay stripping by oxy Cutting from coach

Stripping & Fitting EFT Box on coach/Each

Pan Cutting by cutter grinder

Cross Bearer channel Top the trough floor replacement /Running feet.

Jali Repair /replace Upper bearth and lower berth in coach

Repair of Bracket window Channel frame (Body support Lower)

(i) Replacement of outer bottom horizontal Venturi for ventilation/each

(ii) Replacement of inner bottom horizontal Venturi for ventilation/each

Sliding Door Stopper/Repair top channel sliding door

Additional Activities: (a) Stripping, fitting, welding, and grinding of locking cram/replacing each (b) Stripping, fitting, welding, and grinding of drain chute/replacing each (c) Stripping, fitting, welding, and grinding of sliding door handles inside & outside/ replacing each (d) 54 Stripping, fitting, welding, and grinding of sliding door roller/replacing each (e) Stripping, fitting, welding, and grinding modification of complaint box each (f) Stripping, fitting, welding, and grinding overhead water tank frame/replace 1 angle 2"x48" (g) Stripping, fitting, welding, and grinding of seat bracket/replacing each (h) Stripping & fitting of parcel rack upper/replacing each (i) Stripping, fitting, welding, and grinding of sliding door louver & sliding door patch 4"x4"/each

GST @ 18% Above/

Refitting work of both side :- Strip, cutting, fit , weld & grinding etc of Chequered plate, fall plate, hooks, angle and channel replace, inside hooks, inside pillar rod and its other work if any required

Stripping and fitting/fitting of NFTC (Limpet) Sheet for ceiling , measured peripheral Lump Sum 549687.43 AT Par 549687.43 Description :- GST @ 18% Above/

C-Activities for Welding, Cutting not covered under schedule A & B 15347.08 Below/P

Miscellaneous Welding

Miscellaneous Cutting (MS Sheet) Lump Sum 2341.08 AT Par 2341.08 Description :- GST @ 18% Above/

D-288 NMGH/NMGHS coaches for 24 months 5857407.51 Below/P

Reflector Square

Strip & fit including welding of chequred sheet

Changing of ramp Flap 2-Pins

Securing of Ramp and Flap with wire rope (each)

Fitting of ramp assembly on Door rails for 2 holes

Installation of ramp assembly in ramp pocket (each) Lump Sum 893502.84 AT Par 893502.84 Description :- GST @ 18%

Item Breakup - B-120 NMG Coach for 24 months

Body Patch setup in Size 5'6"X 1'10"

Body Patch setup in Size 3'X 1'10"

Body Patch setup in Size in 1'10"X1'10"

Body Patch setup in Size 10"X10"

Skirting Patch (Large)

Skirting Patch (Small)

Roof Patch in size 6"x9"x1.6

Storm Cornice -Repair/Replace for full Coach

Roof Ventilator and roof testing to full coach

Replacement i.e. Strip, fit, grinding etc of Turn Foot Under, per foot Total 1604021.76 Door Repair work - Door hinge change/ repair, Arl repair and replace, hook repair and replace, Item- 2 tower bolt repair and replace, door patch cutting and fitting for both side of coach and its other work if any required S No. Item Description of Item Unit Qty Rate Amount No

Tower bolt straightened at position

Replacement i.e. Strip & fit of tower bolt

Strip & fitment/replace door pin/each

Strip & fitment/replace door hinge/each

Strip & fitment/replace door hinge straight/each

Strip & fitment/replace door louver/each

Strip & fitment/replace flat strip to fill two-door Numbers 360.00 gap/each

Strip & fitment/replace door Arl arrangement each Numbers 180.00 flap door (per end) Total 545723.04 Refitting work of both side :- Strip, cutting, fit , weld & grinding etc of Chequered plate, fall plate, Item- 4 hooks, angle and channel replace, inside hooks, inside pillar rod and its other work if any required S No. Item Description of Item Unit Qty Rate Amount No

Chequered plate strip, cutting, fitting , welding & Foot Grinding etc

Fall plate replacement i.e. Fall Plate, Hinge, Pin, Numbers 264.00 Hook, End pillar etc Repair /Replace)

Fall plate Straightened at position with attending Numbers 168.00 its all fittings

Replacement of End Pillar

Rest angle or Raster for Fall plate

Replacement of Floor Support Channel Total 726218.40

Item Breakup - D-288 NMGH/NMGHS coaches for 24 months

Strip Fall Plate Rester(Left Rib and Right Rib Numbers 691.20 bracket)/each by oxy cutting.

Grinding, Marking & set tack weld of Fall Plate Numbers 691.20 Rester(Left Rib/Right Rib bracket) each

Full weld of Fall Plate Rester(Left Rib/Right Rib Numbers 691.20 bracket)/each.

Strip Fall Plate Rester(Middel Rib bracket)/each by Numbers 345.60 oxy cutting. JUDW-WSHOP-MECHANICAL/NORTHERN RLY

Surface grinding after oxy cutting for marking and Numbers 345.60 fitment of Fall Plate Rester(Middel Rib bracket)/each .

Marking & set tack weld of Fall Plate Rester(Middel Numbers 345.60 Rib bracket) each.

Full welding & grinding of Fall Plate Rester(Middel Numbers 345.60 Rib bracket)/each.

Fall Plate Replacement

Fall Plate Straightened

Fall plate hang pin replace

Tower bolt strightened at position

Strip & fit tower bolt of NMGH/NMGHS Total 755026.34 Item- 2 Door Work S No. Item Description of Item Unit Qty Rate Amount No

Strip & fitment /Replace door pin/each

Strip & fitment /Replace door hinge each

Strip & fitment /Replace door hinge straight/each

Strip & fitment /Replace Door Louver each

Strip & fitment /Replace Barrel lock catch /each

Door Straightening by oxy heat

Strip U channel,Top lug & Lug/each by oxy cutting. Numbers 172.80

Surface grinding after oxy cutting for marking and Numbers 172.80 fitment U channel,Top lug & Lug/each

Rod Straightening of barrel lock arrangement Numbers 345.60 (20x2400) Each

Marking & set tack weld of U Channel & Down 4 Numbers 518.40 Lug/each

Strip, Set tack & weld Handel of Barrel Lock/each. Numbers 460.80 (If done)

Strip Channel for Rubber cladding/running feet by Foot oxy cutting.

Surface grinding after oxy cutting for marking and Foot fitment Rubber cladding/each running feet.

Marking, set tack of cladding/running feet.

Full weld of Channel for Rubber cladding/running Foot feet.

Strip one end door, folding straightened and refit Set in position (two pieces) NMGH/NMGHS coaches Total 1253557.32 Item- 3 Sliding Door Work S No. Item Description of Item Unit Qty Rate Amount No

"Sliding door line repair"

"Sliding door gap adjustment"

"Sliding door base repair/replacement"

"Sliding door louver repair/replacement"

Sliding door angle repair /replacement

Sliding door accessories (external & internal) - Numbers 403.20 repair/replacement

"Sliding door inside stopper repair"

"Sliding door & protection frame gap maintenance" Numbers 172.80 Total 281166.10 Item- 4 Body Patch Work S No. Item Description of Item Unit Qty Rate Amount No

Body pactch set up in size 3'x1'10" JUDW-WSHOP-MECHANICAL/NORTHERN RLY

Body pactch set up in size 1'10"x1'10"

Body pactch set up in size 10"x10"

Roof patch in size 6"x9"x1.6'

Body patch setup in size 5'6''x1'10'' cutting fitting Numbers 101.25 2656.12 welding & Grinding

End Patch half round Cutting fitting and grinding

Strip & fit Turn under both side (per feet) Total 1578948.43 Item- 5 Roof work S No. Item Description of Item Unit Qty Rate Amount No

Natural light pipe arranngement work,

Ventilator cover work repair /replacement Total 104021.69 Item- 7 Rain water Gutter S No. Item Description of Item Unit Qty Rate Amount No

Strip Rain water Gutter Strip /each by oxy cutting.

Surface grinding after oxy cutting for marking and Numbers 144.00 fitment of Rain water Gutter bracket/each

Marking & set tack weld of Rain water Gutter/each. Numbers 144.00 Total 66105.69 Item- 8 Tail lamp Bracket S No. Item Description of Item Unit Qty Rate Amount No

Strip Tail Lamp bracket/each by oxy cutting.

Marking, set tack & FULL weld of Tail Lamp Numbers 345.60 bracket/each. Total 11184.46 Item- 9 Reflector S No. Item Description of Item Unit Qty Rate Amount No

"White reflective raised"

"Yellow reflective raised "

"Red Reflector raised "

Reflective tape (per coach) Total 40747.12