PROVN OF 20DESERT COOLER S/L ACN OF JCOs/OR OF 611EME BN, 05DFREEZER 500LTR, 05REFGTR 235L FOR MH, 04WATER COOLER ALONGWITH CENTRAL RO WATER SYS OTM ACCN (P-8) 11RSR, SPL REPAIR/REPLACEMENT OF BER TRANSFORMER, WATER COOLER, FANS, GEYSERS AND REFGTR

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of branded pressed galvanised steel terminal box, 60 mm deep with earth dolly of suitable size concealed in wall and modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-One 6A socket point controlled by one switch on independent board

Supply and fix Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specifed and directed.

M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit for surafce wiring complete with its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed for 4runs x 6.0 sqmm(Ph & N) + 1run x 6.0 sqmm(earth wire) (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

Supply and install desert cooler industrial type electric driven (single phase) 230 Volt 50 Hz having ABS/plastic body & tank. Water storage tank of size 100-135ltr having float ball for auto water filling including large Honeycomb pads with dust filters, high speed copper wounded fan motor with three speed control, and capable of air delivery of 5000 CFM and power consumption of approx 190-375Watts, including submersible water lifting pump suitable to lift water upto 6 feet including Speed and auto swing regulator, three core power cable and plug top complete in respect with castor wheels with locking mechanism complete all as specified and directed. Make :EECO COOL Model: Rowdy 100 or, Novamax Model: Rambo 100L or, Bajaj Model: XForce 135L or equivalent in make of Kenstar/ Symphony / Voltas / Crompton

Supply and install duct type desert cooler electric driven (Three Phase) 415 Volt 50 Hz having ABS/plastic fabricated cabinet of size 154 x 111 x 101 mm, water storage tank of capacity 200ltrs having float ball for auto water filling including four side large Honeycomb pads, heavy duty axial fan 4 blade copper wounded motor of 1400 RPM with three speed control aluminium blades and airflow of 18000CMH, including submersible water lifting pump(s) suitable to lift water upto 6 feet including Speed regulator, electrical cable of 4 wire and of size 2.5sqmm and plug top complete in respect with suitable size iron angle stand complete all as specified and directed. Make :Earth Air Cooler/ Symphoney / Ram Coolers/ Kaava Air Innovation/ Murat Air System Pvt Ltd/ Ice Fire Appliances/ Meadows of Street Pvt Ltd

Supply, fabrication, installation & testing of GI sheet with TDF flange rectangular/square duct of size 24 Gauge (0.56 mm thick) class VIII, made out of 'L' shaped hollow profile, duly supported with required supports, duly factory boxed, complete with hangers, Spliter Damper, vanes and all other accessories as required with sealing gasket for supply duct from desert cooler duct to inside the entire cooling area complete withreuire Nos of Aluminum powder coatedsupply air grills with volume control damper including opening of wall for entrance of duct complete all as specified and directed. Note: Cutting chases/hole in wall for inserting duct shall be finished with cement mortar(1:4) and surface shall be matched with existing surface by using putty, POP etc. and applying finishing coat of exisiting treatment without any extra cost.

Supply, fabrication, installation & testing of GI sheet with TDF flange rectangular/square duct of size 22 Gauge (0.71 mm thick) class VIII, made out of 'L' shaped hollow profile, duly supported with required supports, duly factory boxed, complete with hangers, Spliter Damper, vanes and all other accessories as required with sealing gasket for supply duct from desert cooler duct to inside the entire cooling area complete withreuire Nos of Aluminum powder coatedsupply air grills with volume control damper including opening of wall for entrance of duct complete all as specified and directed. Note: Cutting chases/hole in wall for inserting duct shall be finished with cement mortar(1:4) and surface shall be matched with existing surface by using putty, POP etc. and applying finishing coat of exisiting treatment without any extra cost.

Supply & fixing of 19mm external thermal insulation on supply & return air ducts with Closed Cell Elastomeric Nitrile Rubber Foam(Class-O), duly laminated aluminum foil of mat finish including acoustic lining of duct with 15mm thick open cell elastomeric material of high density duly fixed with suitable Pidilite adhesive, and also tighten with suitable size of nuts, bolts and washer conforming to standard specification complete all as specified and directed.

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.