Kerala

Active

Works

Civil Works - Buildings

OTTOOR GP 26-27 PROJECT N O 9 8 HOMEO H O S P I T A L MAINTENANCE IN OTTOOR G P

Local Self Government Department

OTTOOR | Thiruvananthapuram, Kerala

Amount: ₹3.1 LCloses: 22 Oct 20267d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes22 Oct 2026
Bid Opening23 Oct 2026

Tender Value

₹3.1 L

EMD Value

₹7,799

Closing Date

22 Oct 2026, 3:00 pm7d left

Tender Inviting Organisation

Name

Assistant Engineer

Address

The Assistant Engineer LSGD Section Ottoor Grama Panchayat

Work Description

OTTOOR GP 26-27 PROJECT N O 9 8 HOMEO H O S P I T A L MAINTENANCE IN OTTOOR G P

Tender Information

Tender ID

2026_LSGD_878255_2

Reference Number

03/AE/LSGD/TNDR/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

OTTOOR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

as per nit

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredTENDER SCHEDULE (.xls)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredSBD (.pdf)

RequiredE PAYMENT (.pdf)

RequiredINTEGRITY PACT CERTIFICATE (.pdf)

Fee & Financial Details

Tender Fee Amount

₹690

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹7,799

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

23 Oct 2026

Download Starts

13 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

13 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintenance
1.001	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	471.02	sqm	20.94	₹9,863.05
1.002	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	283.11	sqm	116.47	₹32,973.82
1.003	13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm	471.02	sqm	203.74	₹95,964.6
1.004	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	80.1	sqm	110.97	₹8,888.7
1.005	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	20	sqm	168.52	₹3,370.4
1.006	22.23A:Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.	48	sqm	669.4	₹32,131.2
1.007	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	27	kg	597.71	₹16,138.17
1.008	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	22.2	sqm	1,237.15	₹27,464.73
1.009	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	28.2	sqm	1,307.23	₹36,863.89

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.09 MB

Work Item Documents

BOQ_1492656.xls

BOQ • 0.25 MB

viewsbd.pdf

Tender Documents • 1.80 MB

affdvt.pdf

Tender Documents • 0.24 MB

epayment.pdf

Tender Documents • 0.23 MB

fot.pdf

Tender Documents • 0.25 MB

integrity.pdf

Tender Documents • 0.23 MB

prelagree.pdf

Tender Documents • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintenance
1.001	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	471.02	sqm	20.94	₹9,863.05
1.002	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	283.11	sqm	116.47	₹32,973.82
1.003	13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm	471.02	sqm	203.74	₹95,964.6
1.004	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	80.1	sqm	110.97	₹8,888.7
1.005	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	20	sqm	168.52	₹3,370.4
1.006	22.23A:Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.	48	sqm	669.4	₹32,131.2
1.007	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	27	kg	597.71	₹16,138.17
1.008	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	22.2	sqm	1,237.15	₹27,464.73
1.009	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	28.2	sqm	1,307.23	₹36,863.89

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1maintenance

1.001

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

471.02

sqm

20.94

₹9,863.05

1.002

13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

283.11

sqm

116.47

₹32,973.82

1.003

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

471.02

sqm

203.74

₹95,964.6

1.004

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

80.1

sqm

110.97

₹8,888.7

1.005

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

sqm

168.52

₹3,370.4

1.006

22.23A:Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

sqm

669.4

₹32,131.2

1.007

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

597.71

₹16,138.17

1.008

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

22.2

sqm

1,237.15

₹27,464.73

1.009

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

28.2

sqm

1,307.23

₹36,863.89