REPAIR REPLACEMENT OF FLOORING DADO PLINTH PROTECTION AND CERTAIN MISC BR WORKS AT PRC TEMPLE LANE STN HQ MES AND MINOR UNITS AT RAMGARH CANTT

Amount

M&L for demolition of cement concrete (un reinforced) in ground floor & paving of any thickness (above or below ground level )by mechanical tools and removing excavated material exceeding 1.50 km and not exceeding 5.0 km complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Dismantling stone slab of any descreption or thickness in floor aprons etc laid bedded and jointed in any mortar and removal of debris from site complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching /copings /leveliing course/window cill etc. including weathering,slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed

M&L for 40 mm thick plain cement concrete 1:2:4,type B-1(using 20 mm graded crushed stone aggregate) as in floor /hardstanding etc & surface finished even and smooth without using extra cement including dividing strips inserted in position,conform to design complete all as specified & directed. Note :Glass dividing strip shall be measured & paid seperately under respective item of BOQ.

Supply only 38 mm wide glass dividing strips,3.0 mm thick inserted in position,conform to design complete all as specified & directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 300 mm x 200 mm x 6mm mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4), complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x 7mm/450 mm x 300 mm x7 mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4), complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, ,on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, over & including 10 mm thick backing coat in cement mortar (1:4) etc complete all as specified & directed.

M&L for Vitrified light coloured shed ceramic floor tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc, set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles, over & including 20 mm thick screed bed in cement mortar (1:4) etc complete all as specified & directed.

M&L for Vitrified light shed ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm ,on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, over & including 10 mm thick backing coat in cement mortar (1:4) etc complete all as specified & directed.

M&L for machine cut kota stone slab flooring 18mm -20 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:4) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 mm to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over & including 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for reinforced cement concrete (R.C.C.) 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 08 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for 18 to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs,pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

M & L for 16 mm to 18 mm thick marble work of any shade in cooking platform, steps, window, cills etc., over and including 15mm thick screed base in CM (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab where directed, complete all as specified and as directed.

Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off MOD land etc complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed.

M&L for Brick work with using old size sub class "B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for Brick work except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.Note : Bricks obtained from here-in- before item No. 23 above.

M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

Grinding & Polishing with bees wax of existing kota stone/ Terrazo flooring, etc including treating the surface with beeswax polish complete all as directed by Engr-in-charge

M&L for preparation of newely plastered surfaces of wall and applying three coat of white wash on new wall surface complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper(OBD) over a coat of primer and a layer of wall care putty (not less than 2.0 mm thick) complete all as specified and directed.

M/s Ray construction (BID ID -3080409)

M/S Bhushan Kumar Jain (BID ID -3080307)

M/S Kunwar Construction (BID ID -3083363)

Modernage Constructions Pvt. Ltd. (BID ID -3077981)

simplex infra project (BID ID -3080460)

upadhyay engineers and consultant (BID ID -3080354)

M/S PARAS NATH SINGH (BID ID -3084352)

JP ENTERPRISES (BID ID -3084921)