Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹16.2 LAdmitted-Finance VILLAGE BOUNAL P O RAJANA TEHSIL SANGRAH DISTT SIRMOUR H P | -16.21% | ₹16.2 L | L1 | Admitted-Finance |
| 2 | L2₹16.8 L+₹59,299.57 (3.66%)Admitted-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | -13.14% | ₹16.8 L+₹59,299.57 (3.66%) | L2 | Admitted-Finance |
| 3 | L3₹16.8 L+₹62,196.94 (3.84%)Admitted-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | -12.99% | ₹16.8 L+₹62,196.94 (3.84%) | L3 | Admitted-Finance |
| 4 | L4₹16.9 L+₹71,082.22 (4.39%)Admitted-Finance | -12.53% | ₹16.9 L+₹71,082.22 (4.39%) | L4 | Admitted-Finance |
| 5 | L5₹17.4 L+₹1.2 L (7.41%)Admitted-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | -10.00% | ₹17.4 L+₹1.2 L (7.41%) | L5 | Admitted-Finance |
Tender Value
₹19.3 L
EMD Value
₹38,700
Closing Date
8 Sept 2026, 10:00 amClosed
EXECUTIVE ENGINEER HPPWD DIVISION SANGRAH
EXECUTIVE ENGINEER HPPWD DIVISION SANGRAH
C/O PHC building at Gattadhar Tehsil Sangrah Distt. Sirmour H.P. (SH Repair of Building Portion and laying of Paver Blocks) Under Head PDNA
2026_PWD_142308_21
SANGRAH 4313-38Dated 29.08.2026
Open Tender
Civil Works
Percentage
90 days
SANGRAH
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
₹38,700
18 Sept 2026
31 Aug 2026
8 Sept 2026
31 Aug 2026
8 Sept 2026
31 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material in all lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 (One Cement : Three Sand : Six Graded stone aggregate) or richer mix (i/cequivalent design mix) including all leads, lifts and carriage of materials and other incidental charges complete as directed by the Engineer-in-Charge. | 2.17 | Per cubic metre | 1,386 | ₹3,007.62 |
| 2 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials material in all lead including all leads, lifts and carriage of materials and other incidental charges complete as directed by the Engineer-in-Charge. | 36 | per square metre | 33 | ₹1,188 |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material in all lead of: G.S. Sheet including all leads, lifts and carriage of materials and other incidental charges complete as directed by the Engineer-in-Charge. | 150.98 | per square metre | 96 | ₹14,494.08 |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (ten millimetre to twenty five millimetre) including all leads, lifts and carriage of materials and other incidental charges complete as directed by the Engineer-in-Charge. | 42.75 | per square metre | 43 | ₹1,838.25 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 20 (Twenty) mm nominal size)Moulding as in cornices window sill Exceeding 15cm in girth . Moulding as in cornices window sill including all leads, lifts and carriage of materials and other incidental charges completeas as directed by the Engineer-in-Charge. | 0.4 | per square metre | 6,628 | ₹2,651.2 |
| 6 | Providing and fixing aniodized aluminium sliding doors bolts anodized colour and shade with bolts and nuts screws etc.complete 250X16mm(two hundred fifty into sixteen millimetre).as per HPPWD specification 1990-Volume-I,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges. 250X16mm(two hundred fifty into sixteen millimetre) | 5 | each | 195 | ₹975 |
| 7Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with necessary screws etc, complete.as per HPPWD specification 1990-Volume-I,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges. | |||||
| 7.01 | 300X10mm(three hundred into ten millimetre) | 10 | each | 98 | ₹980 |
| 7.02 | 250X10mm(two hundred fifty into ten millimetre) | 25 | each | 89 | ₹2,225 |
| 8Providing and fixing alumimium handles anodized transparent or dyed to required colour of shade with necessary screws complete.as per HPPWD specification 1990-Volume-I,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges. | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.37 MB
SBD.pdf
Tender Documents • 3.68 MB
BOQ_211476.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .