PROVN OF ONE TOILET BLOCK THREE BATHROOM 3 WC AT NEAR OR LINE BLDG NO DY 64 AND CERTAIN OTHER SANCTIONED WORKS AT ALHILAL MIL STN

Amount

SCHEDULE 'A' Part-I Excavation in trenches n exc. 1.5 m wide and n exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L walling of random rubble stone masonry uncoursed, brought upto course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

M&L rendering 15mm thick plaster in CM 1:4 on brick surface or concrete finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L prepartion of newly plastered or unplastered surface of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed.

M&L rendering 10mm thick plaster in CM 1:6 on stone masonry or other than fair faces of brick wall finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface of walls and applying two coats of white wash complete all as specified and directed.

M&L 150mm thick hardcore of guage not exc 63m, deposited, spread and levelled in layers, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footh path finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado etc. laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured to match the tiles complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring & roof complete all as specified and directed.

Form work to rough finished surfaces of concrete for sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

S&F 200 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars dove tailed or welded complete` all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (double T) equal or unequal with oval access door ,complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, (double T) equal or unequal with oval access door ,complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

M&L 150mm dia sail-glazed stoneware drain/sewage pipes laid in trenches and jointed complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) bed to drain pipes including packing under and complete surrounding pipes with concrete after they are laid and tested in trenches for 150 mm bore reinforced concrete pipes, class NP2complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F vitreous china wash down Europian water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed.

S&F plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.

S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends complete all as specified and directed.

S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified & directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F swivel shower along with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete all as specified and directed.

S&F 15mm bore fancy type stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore fancy type chromium plated stop valve/angle cock (concealed type) with long shank and cup cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.

M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L brickwork sub sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick, 600mm secondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main "T" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross "T" is interlocked between the main "T" at 600mm center to center to form a grid of 1200x600mm and then secondary cross "T" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 9mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc25 cm any type of soil complete all as specified and directed.

SCHEDULE 'A' Part-II M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-

One light point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin socket outlet 5 Amp controlled by one switch on independent board.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.

S&F LED Bulb 09/10 watt with provision of fixed in Lamp holder complete all as specified and direccted.

S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete all as specified and directed.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F Exhaust fan made of Strudy Engineering plastic complete, AC single phase, 230V of size 250 mm sweep with blades, and frame and Louvers, energy saving including cutting of wall all as specified and directed by Engr - in - Charge.

Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole & Including MCCB 63 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F, MCB SP 240 volts, 10 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 Sqmm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of Size 16 Sqmm 4 Core.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

S&F tube 'Light grade' galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

S&F tube 'Medium grade' galvanised with all fitting laid in trenches of 25 mm dia complete all as specified and directed.

S&F tube 'Medium grade' galvanised with all fitting fixed to wall/floor of 20 mm dia complete all as specified and directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 25 mm dia complete all as directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as directed.

Drilling and Tapping, existing Cast iron pipes in position, for branch connection of internal dia 20 mm & fixed with 40 mm dia GI pipe complete all as specified and directed.

S & F in replacement ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed for 20 mm bore GI tubing complete all as specified and directed .

M&L construction of header made out of MS pipe of 600mm dia, (Thickness of MS pipe not less than 12mm), 4 mtr length (in two piece of each 2 mtr length), fixing of butterfly valve 600mm dia fixed centre to MS pipe with flange, flanges are tighten with nut bolts and washers etc. complete and providing holes for fixing/welding MS pipe pieces with one flanged end for fixing of sluice valve of size 250mm dia 01 Nos 200mm dia 03 Nos and 150mm dia = 02 Nos and 80mm dia = 04 Nos. MS pipe should be fixed on PCC in foundation and top 1:3:6 type C1 using 20mm graded trap stone aggregate (30cm in foundation & 30cm on top) & achoring with MS strip at 03 place (MS strip should be grouted in PCC at suitable) and masonry block constructed with 230mm thick bricks, sub class 'B' brick builts in CM 1:4 and 15mm thick plastering to brick masonry in cement mortar, including excavation and earth work complete all as specified and directed. Note: (i) Quoted rates are also included to fixing/welding of MS pipes cut pieces as required size/type/length on site each for all 02 Nos inlet and 08 Nos outlet water supply pipeline connections, all type PCC foundation & brick work complete. (ii) All T&P materials will be provided by the contractor without any extra cost. (iii) MS fittings like, flange, dead plate, bends, reducers etc and sluice/butterfly valves should be measured and paid separately under appropriate item below.

S&F butterfly valve of size 600mm and connected with necessary bolts, nuts & washers, gaskets etc complete all as specified and directed.

Supply, fix and welding MS flange 600mm dia, 16mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

Supply, fix and welding MS flange 250mm dia, 12mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

Supply, fix and welding MS flange 200mm dia, 12mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

Supply, fix and welding MS flange 150mm dia, 12mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

Supply, fix and welding MS flange 80mm dia, 10mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

S&F MS dead plate of size 600mm dia, 24mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

S&F MS dead plate of size 250mm dia, 12mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

S&F MS dead plate of size 150mm dia, 12mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed.

S&F MS bend of size 200 dia, 8mm thick complete all as specified and directed.

S&F MS bend of size 150 dia, 8mm thick complete all as specified and directed.

S&F ERW MS pipe 200mm dia 8mm thick complete all as specified and directed. Note: flange should be measured and paid separately.

S&F ERW MS pipe 150mm dia 8mm thick complete all as specified and directed. Note: flange should be measured and paid separately.

S&F ERW MS pipe 80mm dia 8mm thick complete all as specified and directed. Note: flange should be measured and paid separately.

S&F cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unsv sluice valve fixed at any location of size 200mm dia complete all as specified and directed.

S&F cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unsv sluice valve fixed at any location of size 150mm dia complete all as specified and directed.

S&F cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unsv sluice valve fixed at any location of size 80mm dia complete all as specified and directed.

S&F CI non return valve (NRV) conforming to IS 14846/2000, ISI marked with GM flap of size 200mm and connected with necessary bolts, nuts & washers, gasket etc. complete including dismantling of old unsv non return valve complete all as specified and directed.

S&F cast iron air valves with two air outlets, conforming to IS 14845 of size 80mm dia bore and fixing up in DI water supply mains of size 250mm dia complete all as specified and directed.

M&L cutting of existing cast iron pipes in position for insertion of bends (any type, radius and angle) tapers any type (straight bends, increasing, decreasing or double socket etc) Tee pieces, single branch 'Y' junction, double branch, cross (all sockets & spigot) collars, caps & plugs for flanged of pipes 80mm dia bore branch connection etc complete all as specified and directed. Note: DI special fittings shall be measured and paid separately.

M&L cutting of existing cast iron pipes in position for insertion of bends (any type, radius and angle) tapers any type (straight bends, increasing, decreasing or double socket etc) Tee pieces, single branch 'Y' junction, double branch, cross (all sockets & spigot) collars, caps & plugs for flanged of pipes 150mm dia bore branch connection etc complete all as specified and directed. Note: DI special fittings shall be measured and paid separately.

M&L cutting of existing cast iron pipes in position for insertion of bends (any type, radius and angle) tapers any type (straight bends, increasing, decreasing or double socket etc) Tee pieces, single branch 'Y' junction, double branch, cross (all sockets & spigot) collars, caps & plugs for flanged of pipes 200mm dia bore branch connection etc complete all as specified and directed. Note: DI special fittings shall be measured and paid separately.

M&L DI fittings such as bends (any type, radius and angle) tapers any types (straight bends, increasing, decreasing or double socket/flanged etc) Tee pieces, single branch 'Y' junction, double branch, cross (all sockets & spigot/all flanged/restrain joint etc) collars, caps & restrain flanges, plugs for spigot socketed/flanged pipes upto 250mm dia bore complete all as specified and directed.

Taking up cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 100mm complete all as specified and directed.

Taking up cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 150mm complete all as specified and directed.

Taking up cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 250mm complete all as specified and directed.

Taking out old unsv pipe line alongwith fittings from existing connections of size 100mm dia complete all as specified and directed.

Supply & laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required st site of size 80mm dia complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately under relevant item of Sch 'A' (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe.

Supply, laying and testing DI pipes with S/S ends centrifugally cast, class K-9 with cement mortar lining inside the pipes & zinc coated out side as per IS 8329/2000 in any length laid in trenches of 100mm bore sizes all as specified and directed. Note: Excavation and earth work & DI special fittings shall be measured and paid separately.

Supply, laying and testing DI pipes with S/S ends centrifugally cast, class K-9 with cement mortar lining inside the pipes & zinc coated out side as per IS 8329/2000 in any length laid in trenches of 150mm bore sizes all as specified and directed. Note: Excavation and earth work & DI special fittings shall be measured and paid separately.

Supply, laying and testing DI pipes with S/S ends centrifugally cast, class K-9 with cement mortar lining inside the pipes & zinc coated out side as per IS 8329/2000 in any length laid in trenches of 250mm bore sizes all as specified and directed. Note: Excavation and earth work & DI special fittings shall be measured and paid separately.

Removal of excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in lean concrete in mass concrete, paving, base etc complete all as specified and directed.

Supply and fix In line booster pump monoblock type 20 HP with suction & delivery 65 mm dia 3 phase, 415 volts, 48 Mtr Head 12 LPS complete fixed in 250 mm dia pipe line incl proper plumbing work, base work, electrical connections as per OEM design complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 25 Sqmm

Supply and fix MS Bend of size 250 mm dia, 8 mm thick complete all as specified and directed.

Supply and fix cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI Mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts of size 250 mm dia all as directed.

Supply & Fix for CI non return valve (NRV) conforming to IS 5312, ISI marked with GM flap of size 250 mm and connected with necessary bolts, nuts & washers, gaskets etc complete all as directed.

Supply and fix cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI Mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts at any location of size 150 mm dia all as directed.

M & L Cutting of existing Cast iron pipes in position for insertion of bends (any type, radius and angle) Tapers any type (Straight bends, increasing, decreasing or double socket etc) Tee pieces, single branch 'Y' junction,double branch, cross (all sockets or sockets & spigot) collars, Caps & plugs for flanged of pipes 250 mm dia bore branch connection etc all as specified and directed. Note : DI Special fittings shall be measured and paid separately

Supply,laying and testing DI pipes with S/S ends centrifugally cast, class K-9 with cement mortor lining inside the pipes & Zinc coated out side as per IS 8329/2000 in any length laid in trenches of 200 mm bore sizes all as specified and directed :- Note : Excavation and Earth work & DI Special fittings shall be measured and paid separately

S&F Brick work with subclass ‘B’ bricks (using old size bricks), straight or curved on plan exc 6m mean radius & built in cement mortar 1:4.including dismantaling /demolation

RS GREEN INDIA CONSTRUCTION (BID ID -3393787)

GS ENTERPRISES (BID ID -3393987)

BEHL CONSTRUCTION CO (BID ID -3393875)

Akarsha Enterprises (BID ID -3393846)

Lamba Enterprises (BID ID -3394849)

Jai Mahakaal Construction (BID ID -3393811)

M/s Sree Baba Traders (BID ID -3393903)