Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC 474 27 NORTH CIVIL LINE 5 SAKET COLONY MUZAFFARNAGAR UP 251 001 | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹27.2 L+₹1.2 L (4.62%)Accepted-AOC | L2 | Accepted-AOC Rejected being not L1 | |
| 3 | L3₹28.1 L+₹2.1 L (7.99%)Accepted-AOC 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L3 | Accepted-AOC Rejected being not L1 | |
| 4 | L4₹3.3 L+₹7.2 L (27.8%)Accepted-AOC 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L4 | Accepted-AOC Rejected being not L1 |
Tender Value
Refer Docs
EMD Value
₹79,800
Closing Date
17 Mar 2021, 6:00 pmClosed
GE (MES) ROORKEE
Garrison Engineer Military Engineer Services Roorkee
DAY TO DAY MAINT OF FURNITURE LOT E AND G IN MD OTM ACCN UNDER AOR OF GE ROORKEE
2021_MES_422251_1
8392/006/E8
Open Tender
Civil Works
Item Rate
270 days
Roorkee Cantt
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (MES) Roorkee
₹79,800
Yes
19 Apr 2021
15 Feb 2021
19 Mar 2021
16 Feb 2021
17 Mar 2021
3 Mar 2021
Amount
Table Dining 06 persons wooden FD- 273/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Hard top particle board
Leg without PVC ring
Long rail
Short rail
Stiffener at top
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table Dining 08 persons wooden FD-273/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Top particle board
Leg without PVC ring
Long rail
Short rail
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table wooden 3’x3’ without drawer/similar pattern FD- 291/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Top particle board
Stiffener complete at bottom
Leg without PVC ring
front/back/left/right Rail
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table wooden 3' x 2' with Drawer FD-283/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Top particle board
Stiffener complete at bottom
Leg without PVC ring
Long rail
Short rail
Drawer complete
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Chair dining officer MAP Wooden FD/MAP-II / 04 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Front Leg
Rear leg
Seat complete with ply and Rexene instead of tapestry
Front/back/left/right rail of seat
Back vertical rail
Back horiozontal top rail
Stiffener complete at bottom
PVC Ring
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Chair Easy FD- 229 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Front left/right Leg
Rear left/right Leg
Left/right arm rest
Front/rear/left/right rail of seat
Top/bottom/left/right rail of Back frame
Cane of seat
Cane of back
PVC Ring
Bracket of teak wood
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Chair writing ( FD- 280 ) /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Front left/right Leg
Rear left/right Leg
Upper/lower Stiffener of Back support
Left/right arm rest
Front/rear//left/right rail of seat
Stiffener complete at bottom
Cane of seat
PVC Ring
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Chair WBB w/o arm FD- 225 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Front left/right Leg
Rear left/right Leg
Upper/lower Stiffener set of three of Back support
Front/rear/Left/right rail of seat
Stiffener complete at bottom
PVC Ring
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Bed plytop wooden Drg No - FD/MAP/01 and similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Stiffener
Long rail
Short rail
Head rest complete without Leg
Foot rest complete without Leg
Head Leg
Foot Leg
Top Plywood
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table writing wooden FD-275, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Leg without PVC ring
Long rail
Short rail
Drawer
Drawer bearer
shutter
shelf
side sheet left/right
back sheet
hinge
Stiffener complete at bottom
Top particle board
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Teapoy wooden FD-278 similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Top particle board
Leg without PVC ring
Long rail
Short rail
PVC Ring
Bracket
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table Peg wooden 384/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Stiffener complete at bottom
Leg without PVC ring
Long rail
Short rail
PVC Ring
Bracket
Top particle board
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Table center wooden frame FD- FD-274, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.
Stiffener complete at bottom
Leg without PVC ring
Long rail
Short rail
PVC Ring
Bracket
Top particle board
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Sofa MAP Wooden FD/MAP-II / 02 or Similar pattern: Removing existing unserviceable parts and S&F following similar new parts of as per Drg and as directed by Engr-in-Charge for day to day maintenance:-
Leg front
Vertical rail / Leg of back
Side rail of Seat
Arms rest of seat
Beares/Stiffener of Seat
Back ply for single seater
Seat ply for single seater
Front rail of seat of single seater
Rear rail of seat of single seater
Top / bottom rail of back of single seater
Removing of existing unserviceable cushion from sofa and S&F cushion for seat & back, size 21"x22" x100mm thick, 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr and width 4 feet). Cushion tapestry cloth must be stiched with good quality zipper chain (as approved by GE ) from two sides of cushion so that during use of cushion, the outer tapestry cloth cover can be removed for cleaning dirt etc/washing and re-inserting complete all as specified and directed by Engr-in-Charge.
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) for single seater sofa set complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) for three seater sofa set complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Sofa wooden FD-281 or similar pattern: Removing existing unserviceable parts and S&F following similar new parts of as per Drg and as directed by Engr-in-Charge for day to day maintenance:-
Battens of Back
Battens of Seat.
Vertical rail of back
Side rail of seat
Arm rest of seat
Front rail of seat of single seater
Top/bottom rail of back of single seater
Beares of back of single seater
Beares of seat of single seater
Removing of existing unserviceable cushion from sofa 3/1 seater and S&F cushion for seat & back, size 21"x22" x100mm thick, 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr and width 4 feet). Cushion tapestry cloth must be stiched with good quality zipper chain (as approved by GE ) from two sides of cushion so that during use of cushion, the outer tapestry cloth cover can be removed for cleaning dirt etc/washing and re-inserting complete all as specified and directed by Engr-in-Charge.
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) for single seater sofa set complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) for three seater sofa set complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Chair Dining FD- 279 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Front leg
Rear leg
Upper/lower Stiffner set of three of Back support
Front/rear/left/right rail of seat
Stiffner set of three of Leg bottom
Canning of seat
PVC Ring
Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.
Chair dining JCO / OR MAP Wooden FD/MAP-II / 05 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Front leg
Rear leg
Front/ back/ left/ right rail of seat
Back horizontal rail
Seat PVC moulded
Stiffener set of three legs
PVC ring
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Table wooden 3' x 2' without Drawer FD-284 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Top particle board
Stiffener set of Leg
Leg without PVC ring
Long rail
Short rail
PVC iing
Bracket
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Table wooden 2’x2’ without Drawer FD-293 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Top particle board
Stiffener set for legs
Leg without PVC ring
Front/ back/ left/ right rail of hard top sheet
PVC ring
Bracket
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Bed plytop wooden Drg No - FD-246 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Stiffener
Long rail
Short rail
Head rest complete without leg
Foot rest complete without leg
Head leg
Foot leg
Top Plywood for sleeping
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
Table Wooden 5'x2'10" FD139 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-
Hard top complete
Long rail
Short rail
PVC ring
Bracket of teak wood
M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.
AKANSHA.ASSOCIATES
M/s R.K.Jain
JAISWAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .