Kerala

AOC

Works

Electrical Works

Thiruvampadi GP project No324/26-Shopping complex Electrification Retender

Local Self Government Department

THIRUVAMBADY | Kozhikode, Kerala

Amount: ₹1.2 LCloses: 12 Jun 2026Closed

Timeline

Published5 Jun 2026
Closed12 Jun 2026
Technical Evaluation18 Aug 2026
Awarded21 Aug 2026

Bids

Percentage

3 Bids21 Aug 2026

#	Company	Amount	Rank	Status
1	FIROZ KHAN K K L1₹1.0 LAccepted-AOC	₹1.0 L	L1	Accepted-AOC Accepted Vide Resolution of THIRUVAMBADY GP dated on june 15
2	JITHESH K L2₹1.1 L+₹2,717.71 (2.64%)Rejected-AOC	₹1.1 L+₹2,717.71 (2.64%)	L2	Rejected-AOC Accepted Vide Resolution of THIRUVAMBADY GP dated on june 15
3	SHAJI C L3₹1.1 L+₹8,400.19 (8.16%)Rejected-AOC	₹1.1 L+₹8,400.19 (8.16%)	L3	Rejected-AOC Accepted Vide Resolution of THIRUVAMBADY GP dated on june 15

Tender Value

₹1.2 L

EMD Value

₹3,088

Closing Date

12 Jun 2026, 6:00 pmClosed

Tender Inviting Organisation

Name

OFFICE OF ASSISTANT ENGINEER THIRUVAMBADY GP

Address

OFFICE OF ASSISTANT ENGINEER LID EW THIRUVAMBADY GP

Work Description

Thiruvampadi GP project No324/26-Shopping complex Electrification Retender

Tender Information

Tender ID

2026_LSGD_853839_3

Reference Number

1/2026-27/LID EW/TDY

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Location

THIRUVAMBADY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBid security remittence (.pdf)

RequiredBid submission letter as per item no-1 Part-VI (.pdf)

RequiredIntegrity pact certificate as per item no-3 PartVI (.pdf)

RequiredPreliminary agreement as per item no-2 PartVI (.pdf)

RequiredRequisition for e-payment as per item no-6 PartVI (.pdf)

RequiredAffidavit as per item no-4 Part- VI (.pdf)

RequiredBidder valid registration certificate (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredGST Document (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹3,088

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

21 Aug 2026

Published

5 Jun 2026

Bid Opening

15 Jun 2026

Download Starts

5 Jun 2026

Download Ends

12 Jun 2026

Submission Starts

5 Jun 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (30 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1thamarasary
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	-	sqm	2,559.91	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	3,468.88	-
1.003	90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet	-	metre	46.98	-
1.004	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	170.22	-
1.005	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	6.65	-
1.006	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	6.31	-
1.007	90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp	-	metre	210.77	-
1.008	9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)	-	set	253.37	-
1.009	90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)	-	metre	45.65	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

BOQ_1443177.xls

BOQ • 0.27 MB

324sbd.pdf

Tender Documents • 1.70 MB

324nit.pdf

Additional Documents • 0.02 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

FIROZ KHAN K K

L1₹1.0 LAccepted-AOC

JITHESH K

L2₹1.1 L+₹2,717.71 (2.64%)Rejected-AOC

SHAJI C

L3₹1.1 L+₹8,400.19 (8.16%)Rejected-AOC

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1thamarasary
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	-	sqm	2,559.91	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	3,468.88	-
1.003	90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet	-	metre	46.98	-
1.004	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	170.22	-
1.005	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	6.65	-
1.006	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	6.31	-
1.007	90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp	-	metre	210.77	-
1.008	9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)	-	set	253.37	-
1.009	90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)	-	metre	45.65	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1thamarasary

1.001

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

sqm

2,559.91

1.002

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

sqm

3,468.88

1.003

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

metre

46.98

1.004

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

170.22

1.005

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Cum cm

6.65

1.006

90.14.7:Supply and providing copper earth bus in the panel board

Cum cm

6.31

1.007

90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp

metre

210.77

1.008

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

set

253.37

1.009

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

metre

45.65