Maitainance of Sajal Dhara at All Sansad of Payradanga GP

Amount

MAINTANANCE OF SWAJALDHARA AT ALL SANSAD

Taking out 40mm. Dia.Tube-well pipe at site (Upto 100 ft.).

Taking out 40mm. Dia.Tube-well pipe at site (From 101 ft. to 200 ft.).

Taking out 40mm. Dia.Tube-well pipe at site (From 201 ft. to Above).

Supplying,fitting and fixing plastic filter (9 ft long) of 40mm.dia at site

Supplying,fitting and fixing filter cap of 40mm.dia at site

Supplying,fitting and fixing TATA(M) of 40mm.dia at site

Supplying,fitting and fixing P.V.C.pipe of 40mm.dia at site (Ordinary)

Supplying,fitting and fixing P.V.C.pipe of 40mm.dia at site (I.S.I. Mark)

Cutting thread of G.I.pipe of 40mm.dia at site

Supplying,fitting and fixing Iron Socket of 40mm.dia at site

Supplying,fitting and fixing Nipple pipe(G.I.) of 40mm.dia (4 ft long) at site.

Supplying,fitting and fixing plastic washer of at site

Supplying,fitting and fixing Dhapa of at site

Supplying,fitting and fixing Full pump body(Populer-6nos,Maya etc.) of 40mm.dia at site

Supplying,fitting and fixing Plunjar for 40mm.dia tube-well at site

Supplying,fitting and fixing Handle Nuts & Bolts at site.

Supplying,fitting and fixing Base Nuts & Bolts at site.

Supplying,fitting and fixing Plunjer Nuts & Bolts at site.

Supplying,fitting and fixing Head Nuts & Bolts at site.

Supplying,fitting and fixing Clamp Set for 40 mm. dia. tube-well at site

Supplying,fitting and fixing Base Plate for 40 mm. dia. tube-well at site.

Supplying,fitting and fixing Wet for 40 mm. dia. tube-well at site.

Supplying,fitting and fixing Handel for 40 mm. dia. tube-well at site.

Supplying,fitting and fixing Pump Body (Barrel) for 40 mm. dia. tube-well at site.

Supplying,fitting and fixing Piston Rod for 40 mm. dia. tube-well at site.

Supplying,fitting and fixing Head Cover for 40 mm. dia. tube-well at site.

Supplying of Bleaching Powder at site.

Supplying,fitting and fixing Point for 40 mm. dia. tube-well at site.

Boring of G.I./PVC pipe of 40mm dia.at site (Upto 100 ft.).

Boring of G.I./PVC pipe of 40mm dia.at site (From 101 ft. to 200 ft.).

Boring of G.I./PVC pipe of 40mm dia.at site (From 201 ft. to Above).

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing

MARK-II BEARING

MARK-II SHAFT

MARK-II CHAIN

MARK-II CYLINDER

MARK-II CYLINDER ROD

Boring of GI/PVC pipe 150mm dia

Supply of 150mm dia PVC pipe (Approved brand)

Supply of 150mm dia GI pipe (TATA make)

Supply,fitting,fixing of CC ring including cover ( 750dia , 250 mm height )

SUPPLY OF 3000 LITR PVC WATER STORAGE TANK(SINTEX)

SUPPLY OF 2000 LITR PVC WATER STORAGE TANK(SINTEX)

SUPPLY OF 500 LITR PVC WATER STORAGE TANK(SINTEX)

1.5 INCH PVC PIPE (SUPREME OR SAME)

1 INCH PVC PIPE (SUPREME OR SAME)

½ INCH PVC PIPE (SUPREME OR SAME)

1½ INCH ELBOW

1.5 INCH TEE

1.5 INCH SOCKET

1.5INCH KEY

1.5 INCH TRUNK NIPPLE

1.5 INCH UNION

1.5 INCH MTA

1.5 INCH FTA

1.5 INCH PACHOVER

1.5/1 ELBOW

1.5/1 SOCKET

1 INCH ELBOW

1 INCH TEE

1 INCH SOCKET

1 INCH KEY

1 INCH TRUNK NIPPLE

1 INCH UNION

1 INCH MTA

1 INCH FTA

1 INCH PACHOVER

1/2/1 INCH TEE

1/2/1 INCH SOCKET

1/2/1 INCH KEY

1/2/1 INCH TRUNK NIPPLE

1/2/1 INCH UNION

1/2/1 INCH MTA

1/2/1 INCH FTA

1/2/1 INCH PACHOVER

1/2/1 ELBOW

1/2/1 SOCKET

½ INCH TEE

8040 membrane diw point

Membrane housing

1 HP Pump (Crompton)

Multi Port Valve(MPV)

Brass Valve

½ INCH FTA

½ INCH PACHOVER

½ INCH ELBOW

½ INCH TEE

½ INCH SOCKET

BIB COCK PVC

HAVAC

TAPLON TAPE

PVC PIPE GLUE

FILTER JUMBO

CARRIAGE,FITTING & FIXING OF 3000 LTR TANK

CARRIAGE,FITTING & FIXING OF 2000 LTR TANK

CARRIAGE,FITTING & FIXING OF 500 LTR TANK

CUTTING AND WELDING OF STEEL STRUCTURE

20 LTR PLASTIC JAR

Maintanance of entire installation upto 1 year which includes A) Cleaning of site , checking of valves and pipes , cheaking of electrical connections twice in a month. B) Replacement of damaged valves , bib cocks and any other parts of all units as and when necessary . C) Repair/ replacement of pumping machinary i.e controllar , PV panel starter , wearing , switches etc as and when necessary . D) Painting of MS structure and all painted surface at the end of each year.

Complete overhauling of oxidation vessel , pre filter vessaleas and when required by engagement of labour and equipments ( the work to be executed on written permision from the engineer in charge ) which includes A) Complete removal of media from the vesseils , breaking of clods and through washing and clening of all media. B) Placement of all media with 10% fresh new media ( Lost during washing ) including cost and carrige of the fresh new media

Complete replacement of MnO2 and green sand in the oxidation vessel and prefilter vessel as and when required by engagement of labour and equipments ( the work to be executed on written permission from the Engineer in charge ) which includes complete removal of old media from the vessels and placement of new medid including cost and carriage

Complete replacement of Arsenic media in the each arsenic vessel as and when required by engagement of labour and equipments ( the work to be executed on written permission from the Engineer in charge ) which includes complete removal of old media from the vessels and placement of new media including cost and carriage 350MM DIA VESSEL

Complete replacement of Arsenic media in the each arsenic vessel as and when required by engagement of labour and equipments ( the work to be executed on written permission from the Engineer in charge ) which includes complete removal of old media from the vessels and placement of new media including cost and carriage 250 MM DIA VESSEL

PURNIMA CONSTRUCTION (BID ID -6217009)

FILTER POINT (BID ID -6216944)