Karnataka

Active

Works

Irrigation and Other Works

PROVIDING IRRIGATION FACILITY BY DRILLING BOREWELL TO LAND BEARING SY NO 23/4 OF SRI RAJAPPA BIN BASAPPA OF JANKONDA VILLAGE IN CHITRADURGA TALUK CHITRADURGA DISTRICT.

Minor Irrigation Department

Minor Irrigation Division Chitradurga | Chitradurga, Karnataka

Amount: ₹3.2 LCloses: 2 Jul 20266d left

Tender Value

₹3.2 L

EMD Value

₹8,000

Closing Date

2 Jul 2026, 9:30 pm6d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

PROVIDING IRRIGATION FACILITY BY DRILLING BOREWELL TO LAND BEARING SY NO 23/4 OF SRI RAJAPPA BIN BASAPPA OF JANKONDA VILLAGE IN CHITRADURGA TALUK CHITRADURGA DISTRICT.

Tender Information

Tender ID

309459

Reference Number

MI/2026-27/IW/WORK_INDENT12039

Tender Type

Open

Product Category

Irrigation and Other Works

Location

Minor Irrigation Division Chitradurga

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate along with Balance sheet certified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

RequiredContractor Registration/Company Registration Certificate/PWD registration certificate CLASS III/II/I and Class-I Contractor registered in BESCOM/KPTCL

RequiredBore wells are to be drilled by the agencies that are enrolled in a format of 7A rigs from Antharjala Pradhikara.

RequiredLatest Address and contact number for communication to be furnished. Contractor should produce the GST Registration Certificate along with latest updated G.S.T Clearance Certificates.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bore wells are to be drilled by the agencies that are enrolled in a format of 7A rigs from Antharjala Pradhikara.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

1.Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka. 2. Contractor Should Quote the Rates Exclusive of GST. 3.It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Kppp Portal on or before the last date and time of bid submission. 4. The employer reserves the right to accept any tender and to reject any or all tenders without assigning any reason. 5. The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Kppp portal due to internet connectivity issues and technical glitches at bidders end. EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. 6. Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. 7. Conditional tender will not be considered Sub-Leasing/G.P.A of Work is prohibited. Tender application amount will not be refundable. 8. The contractor has to compete the bid (quote the rates) for all schedule B items of the works mentioned. 9.The Contractor shall pay the Earnest Money Deposit EMD & Tender Transaction fee in the Kppp portal using any of the following payment modes Credit Card, Direct Debit, National Electronic Fund Transfer NEFT, and Over the Counter OTC. 10.The tenderer shall scan and upload all the original documents required for this bid to the Kppp portal. The uploaded documents should be clear (Visible), unclear documents will be rejected. The original documents shall be produced at the time of physical verification. 11.One percent of the bill amount of the successful tenderer will be deducted towards cess as a labor welfare fund. 12.All documents enclosed should be attested by Gazetted officer or Government Notary, otherwise the bids are liable for disqualification. Original documents should be produced for verification at any stage of the Tender process, as and when sought for. Failure to produce original documents will lead to disqualification. Work done certificates should have all the CR no, work order issuing date, work completion date and year. All documents to be furnished are to be countersigned by the employer in charge, not below the rank of an executive in-charge or equivalent.

13.The contractor has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution. Transportation charges from the site of work to Q.C. Lab of all the samples collected for testing should borne by the contractor himself. 14. The intending bidder firm/ company are advised to visit the work site before submission of tenders. 15.Omission and typographical errors which are in the opinion of the executive Engineer will not be a ground for claims of extra payment. 16.Royalty charges will be deducted from the contractors running bill as per the prevailing royalty charges at the time of payment. IT, GST and others taxes will be deducted as per the prevailing Government Order. GST & EPF registration certificate from competent authority. 17. The tender is invited as per Standard tender Bid Document KW-2 and shall abide for the conditions contained in Standard tender Bid Document KW-2. 18.Price adjustment clause will not be applicable as per prevailing government order and only star rates are applicable. 19.Executive engineer reserves the right to accept or reject any tender and to cancel the tender process and reject all tenders at any time prior to award of contract, without there by incurring any liability to the affected tenderer or tenderers or any obligation to inform the affected tenderer or tenderers of the grounds for the employers action. 20.The contractor must upload existing commitment of the ongoing works in hand for the calculation of tender capacity. Tenderers shall provide the requested information accurately and in sufficient detail in section 3. 21.The contractor should obtain the Material Dispatch Permit for stone, aggregates, sand and Murom etc will be used in the construction work from the Mines and Geology department at the time of execution and same should be submitted along with the work bill, then for such work bills no Royalty will be deducted. If the contractor failed to submit the Material Dispatch Permit along with the work bill Five times Royalty will be deducted from the work bill as per KMMCR 2016 amendment rule 44(4) and the circular vide No.Ga.Bhu.E/DCB/DCB/Takte/2019-20/4497 Dated: 12/12/2019 by Mines and Geology department. 22.Restrictions on Public Procurement from Bidders of certain countries as per Government order No.FD 455 Exp-12 2020 Bangalore dated: 25-08-2020. 23.Item for which 0.00 rates entered will not be paid for by the employer when executed and shall be deemed covered by the other rates & prices in the bill of quantities. 24.The Defects Liability Period is 365 Days after the completion of work.

Technical Criteria

General

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Capabilities of Vendor

Contractor Registration/Company Registration Certificate/PWD registration certificate CLASS III/II/I and Class-I Contractor registered in BESCOM/KPTCL

PWD Registration Certificate (Class I/II/III/IV)

Bore wells are to be drilled by the agencies that are enrolled in a format of 7A rigs from Antharjala Pradhikara.

Others -- Bore wells are to be drilled by the agencies that are enrolled in a format of 7A rigs from Antharjala Pradhikara.

Financial Status

3.2To qualify for award of this contract, each tenderer in his name should have in the last five years Period (2021-22 to 2025-26) a) Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 5.00 Lakhs (usually not less than the estimated cost under this contract) (Annual Turnover Certificate along with Balance sheet certified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number)

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹8,000

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

3 Jul 2026

Download Ends

1 Jul 2026

BOQ Preview

•

PROVIDING IRRIGATION FACILITY BY DRILLING BOREWELL TO LAND BEARING SY NO 23/4 OF SRI RAJAPPA BIN BASAPPA OF JANKONDA VILLAGE IN CHITRADURGA TALUK CHITRADURGA DISTRICT.

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Borewell depth of 50 to 100 Mtrs

•

Borewell depth of 100 to 150 Mtrs

•

Borewell depth of 150 to 200 Mtrs

•

Providing and installing at site of work P.V.C. pipes for casing including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at jo...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

CABLE: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. ...

•

GATE VALVE: Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm. complete with all lead and lifts and as directed...

•

NON-RETURN VALVE: Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm. complete with all lead and lifts and...

•

Galvanized MS Tube: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted wi...

•

METER AND PANEL BOARD: OutdoorType: Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1No set of Phase indicating lamps with SFU of suitable rati...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

EARTHING: Supplying, fixing and wiring earth elctrode for grounding circuits, IC cutouts and othee equipments on the meter board in the pit, The pits should be filled with equal proportion of salt and...

•

CAPACITOR: Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of th...

•

Providing, Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary material...

•

Labour charges for Erection, elctrification and commissioning of pump sets, including aligning and balancing of all items including supply and erection of two pairs of support clamps, borewell caps, c...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. complete with a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW General instructions to Bidder.zip

Instructions to Tenderers • 11.26 MB

KW1 WORK_INDENT12039 TSP CTA.doc

Tender Document • 1.45 MB

Ready to Participate?

Download all tender documents and submit your bid