DEVELOPMENT OF MULTIPURPOSE HALL UNDER AADARSH MAHAVIDHYALAY PROJECT (CIVIL & ELECTRICAL) AT: Govt Commerce and Science College, Dahej, Bharuch

Item Description Qty. Unit (Weighted Total Amount

Item Description Qty. Unit (Weighted Total Amount

Supply of Wooden

Podium, assembled ready

to use, made from three-

layer pre-laminated

particle board (wood

product) of Grade II Type

II/III conforming to IS

12823 (Latest), with

approximately 600 ×

× 1200 mm and presenter

height 1100 mm. The

podium top and panels

shall be 19 mm thick,

finished with 0.6–0.8 mm

laminate in suede finish

conforming to IS 2046 Rupees

(Latest), including Nineteen

balancing laminate, and Thousand

all exposed edges finished Nine Hundred

with 2 mm PVC edge Ninety Nine

banding. The podium Only

shall have angled reading

surface, fixed top, paper

stop, open storage with

two shelves, wire

management, one fixed

socket box with flip

cover, and footrest of

mm board. Finish shall be

in Wenge and Natural

Teak shade, complete in

all respects including

materials, labour,

transportation, etc., as per

approved specifications,

with 3 years warranty.

Supply of Centre Table,

made from particle board

with wooden/engineered

wood under-structure,

having rectangular table

top of approximate size

standard height about

mm. The table top shall be

18 mm thick, with 25 mm

thick straight edges,

finished with decorative

laminate on both top and

bottom sides, and exposed

edges finished with PVC

edge banding. The under- Rupees Nine

2 structure shall consist of 3.00 Ea. 9,000.00 Thousand

particle board legs of Only

thickness, laminated on

both sides, without

modesty panel or storage

unit. The table shall be

finished in white colour

table top and brown

colour under-structure,

complete in all respects

including materials,

labour, finishing,

transportation, etc., as per

approved specifications,

with a warranty period of

Auditorium chair,Frame:

Steel (mild steel / powder-

coated) With integrated

auto tip-up mechanism,

Seat/Back: PU Foam

leather or fabric Rupees Eight

3 cushioned, Writing Pad: 150.00 Ea. 8,000.00 Thousand

Fold-down/up wooden or Only

laminate board attached to

arm, includind fixing

chair.Usage: Auditoriums

lecture halls, conference

3 Seater SofaMade up of

Moulded PU foam of

±5 density, Tubular steel Rupees

structure for stand, Metal Nineteen

4 frame for Seat & back 8.00 Ea. 19,470.00 Thousand Four

frame, PPCP plastic tray Hundred

for seat & back cover, Seventy Only

PPCP arm rest with cup

holder, Laminated fabric.

Chair,Dimensions: 97cm

Upholstery Material:

Velvet, Seat Filling: Rupees

Foam and Spring, Frame Twelve

5 Material: Solid Wood, 5.00 Ea. 12,999.00

Wood Type: Pine, Seating Ninety Nine

Capacity: 1-Seater, Only

Assembly Required: Yes,

Assembly Service

Provided by Retailer.

All in One PC, Windows

11 PRO,Gen intel multi-

core.16GB Ram, 512GB

Storage,HP IdeaCentre

All-in-One Desktop PC

with 13th Gen Intel

Processor, integrated Rupees One

6 display, Windows 11, 1.00 Ea. 1,24,000.00

Keyboard & Only

Mouse.Model/Variant:HP

ProOne 440 G9 60.5 cm

(23.8) 13th Generation

Intel® Core™ i7

Manufacturer:HP.

Providing, supplying,

stitching and fixing

flame-retardant manual

centre-opening stage

curtain with 2.0 fullness,

using approved flame- Rupees Two

7 retardant polyester stage 46.56 Sqm 2,570.00

velour / blackout fabric of Seventy Only

minimum 280 GSM, of

approved make and

quality, with flame-

retardant lining, in colour

and shade as approved by

the Engineer-in-Charge /

Client, complete with

heavy-duty aluminium

traveller track, runners,

rope & pulley operating

mechanism, fabric-

covered pelmet, all

necessary accessories,

installation, alignment,

testing and flame-

retardant compliance

certification, complete as

directed by Engineer-in-

Point wiring for Tissino /

Modular secondary light

point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm

(green) both are of ISI

marked 1.1 KV grade

FRLS PVC insulated

multi strand copper wires,

in below type of pipe to be

erected complete with

earth continuity and

necessary connection

with primary light with

accessories erected on Rupees One

Metal / PVC / wooden

8 40.00 Pt. 158.57 Eight and Fifty

box covered with 3 mm Seven Paise

PC(Polycarbonate) /

Acrylic sheet for open /

concealed wiring. with

necessary Lamp holder /

H.D.Connector as

(a) with medium class

Rigid PVC pipe and

accessories erected

flushed on wall/ceiling

Point wiring for Light /

Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm

(Green) both are of ISI

marked 1.1 KV grade

FRLS PVC insulated

multi strand copper wires

up to 10 mtr length , in

below type of pipe erected

with 6A Modular type

switch / bell push &

accessories and earth

continuity of following Rupees Five

type, erected on PVC / Hundred

9 Metallic/Wooden box, 20.00 Pt. 539.34

single mounting base Four Paise

frame covered with Only

textured/metallic/white

front plate modules

erected on / in wall /

ceiling as per pipe

erected, with necessary

Lamp holder/ceiling rose /

H.D.Connector as

directed.(a) with medium

class Rigid PVC pipe and

accessories erected

flushed on wall/ceiling

completeCat.III

Point wiring for

Individual Plug with &

earth wire of 1.5 sq.mm

(Green) both are of ISI

marked 1.1 KV grade

FRLS PVC insulated

multi strand copper wires

up to 10 mtr length, in

below type of pipe erected Rupees Five

complete with Modular Hundred

10 type switch & 5 pin Plug 14.00 Pt. 570.65 Seventy and

erected on PVC / Sixty Five

Metallic/Wooden box Paise Only

covered with appropriate

front plate modules

erected on / in wall /

ceiling as per pipe erected

with following type of

[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm

Cu. Wire from nearby

switchboard/mcb db

(a) with medium class

Rigid PVC pipe and

accessories erected

flushed on wall/ceiling

Point wiring for

Individual Plug with &

earth wire of 1.5 sq.mm

(Green) both are of ISI

marked 1.1 KV grade

FRLS PVC insulated

multi strand copper wires

up to 10 mtr length, in

below type of pipe erected

complete with Modular

type switch & 5 pin Plug

erected on PVC /

Metallic/Wooden box Rupees One

covered with appropriate

11 16.00 Pt. 1,004.95 and Ninety

front plate modules Five Paise

erected on / in wall / Only

ceiling as per pipe erected

with following type of

accessories.[III] For 16A

Plug and 16 amp switch

with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green)

earthing wire from mcb d

b board. (a) with medium

class Rigid PVC pipe and

accessories erected

flushed on wall/ceiling

completeCat.III

Point wiring for on board

Looped Plug with 6A

Modular type switch & 5 Rupees Three

pin socket erected on PVC Hundred Nine

/ Metallic / Wooden box, and Six Paise

single mounting base Only

frame covered with

textured / metallic/white

front plate modules

erected on / in wall /

ceiling with following

type accessories

Providing and erecting ISI

mark Medium class

RIGID PVC PIPES of

following size complete

to be erected on/in wall or

ceiling erected with Rupees Thirty

13 necessary PVC fittings & 300.00 Mtr. 33.33

Junction boxes fixed with Paise Only

adhesive solution &

Clamps with following

dia of pipes, inapproved

manner as directed

Providing and erecting

Mains with 1.1 KV grade

FRLS PVC insulated ISI

marked stranded Copper

conductor wire in

following type of pipe to

be erected concealed in

/flushed on wall/ceiling, Rupees

with 1.5 sq. mm copper

14 350.00 Mtr. 78.78 and Seventy

conductor FRLS PVC Eight Paise

insulated stranded wire of Only

green colour for earth

continuity of following

(A) With medium class

Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm

providing and erecting

Mains with 1.1 KV grade

FRLS PVC insulated ISI

marked stranded Copper

conductor wire in Rupees One

following type of pipe to

15 80.00 Mtr. 140.39 and Thirty

be erected in / on wall / Nine Paise

ceiling with 2.5 sq. mm Only

copper conductor FRLS

PVC insulated stranded

wire of green colour for

earth continuity of

(A) with medium class

Rigid PVC pipe and

(a) 2 wire 4 sq. mm

Supplying and erecting,

industrial low bay mirror

optic luminaires made

from CRCA sheet steel

with aluminium reflector Rupees Two

& transparent acrylic Thousand One

16 cover for indoor 4.00 Ea. 2,149.28

installation with Copper Twenty Eight

ballast, igniter, capacitor, Paise Only

Holder, integral type with

one no. 70 watt SON

lamp/metal halide lamp.

Supplying and erecting

LED indoor fittings with

LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on

single MCPCB, with

housing used as a heat

sink shall be made of

thick sheet Steel

conforming to IS:

513/CRCA/aluminium

pressure die cast powder

coated and high U.V. &

corrosion resistance with Rupees Two

diffuser housed in Hundred

17 aluminium casted body 25.00 Mtr. 220.18 Twenty and

with company mark/name Eighteen Paise

160V to 270V,Power Only

Factor more than 0.95,

THD < 15 %, CCT

K to 6500K, Luminaire

efficacy> 85 lumens/watt

, LED driver efficiency >

85 % ( fitting required

Certificates)(NOTE:

Below description have

shown ranges of Wattage

capacity of LED

fittings.The Engineer

incharge may select any

wattage capacity between

the ranges shown.)

(D) LED Strip Light

(ii) Minimum 7.2W -240

LED per meter,(2 wire,

IP-65) with non integral

suitable Driver complete

Supplying and erecting

LED indoor fittings with

LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on

single MCPCB, with

housing used as a heat

sink shall be made of

thick sheet Steel

conforming to IS:

513/CRCA/aluminium

pressure die cast powder

coated and high U.V. &

corrosion resistance with

diffuser housed in

aluminium casted body

with company mark/name Rupees Seven

160V to 270V,Power

18 60.00 Ea. 758.51 Eight and Fifty

Factor more than 0.95, One Paise

THD < 15 %, CCT 3000 Only

K to 6500K, Luminaire

efficacy> 85 lumens/watt

, LED driver efficiency >

85 % ( fitting required

Certificates)(NOTE:

Below description have

shown ranges of Wattage

capacity of LED

fittings.The Engineer

incharge may select any

wattage capacity between

the ranges shown.)

(A) Square/ Circular

shaped Surface/Recessed

Mount Downlight with

provision for spring

loaded mounting clips

(iv) 22-24 watts, Surge-2

Supplying and erecting

LED street light / Flood

light fittings with High

power White LEDs

wattage of 3 Watt and

above assembled on

efficiency more than

lm/w and corrosion free

High pressure die cast

aluminum housing with

smooth finish powder

coated and heat sink

extruded aluminium with

diffuser and Rupees Seven

Polycarbonate optics/ Thousand One

lenses, with toughened Hundred

glass with company Eighty Six and

mark/name engraved or Fifteen Paise

embossed 160 to 270 Only

V,Power Factor more

than 0.95, THD < 10 %,

5700K,Uniformity ratio

>0.45, Luminaire

lumens/watt . LED driver

efficiency > 85 %.(

fittings required LM-79 &

certificates)(NOTE:

Below description have

shown ranges of Wattage

capacity of LED

fittings.The Engineer

incharge may select any

wattage capacity between

the ranges shown.)(B)

Flood Light (IP-65),

Surge protection -4KV

integral and ,Light must

have 440VAC line supply

with overvoltage

protection.(v) 120 to

Providing Approved

make Triple Pole Metal

Clad Switch Fuse Unit Rupees Two

415/500 V. with HRC Thousand One

20 fuse of suitable load and 2.00 Ea. 2,105.85

neutral link confirming to Five Paise

Providing Approved

make Triple Pole Metal

Clad Switch Fuse Unit Rupees Three

415/500 V. with HRC Thousand Two

21 fuse of suitable load and 2.00 Ea. 3,261.29

neutral link confirming to Twenty Nine

Erection & connection

charges for 32A/ 63 A / Rupees

100 A HRC TPN as Seventy Three

22 following 4.00 Ea. 73.73 and Seventy

(a)on existing wooden Three Paise

block / A.I.frame

providing and erecting

Miniature circuit breaker Rupees One

single pole 6A to 25A Hundred

23 suitable to operate on 240 35.00 Ea. 123.22

V A.C. system and having Two Paise

breaking capacity 10 KA Only

to be erected in existing

box. confirming to IS

8828/1996 with ISI Mark

Providing and erecting

Sheet Steel powder coated

MCB distribution board -

flush / surface mounted

fitted with busbar, neutral

link, earth bar and DIN

rail, Conforms to IS 8623-

without MCB to house Rupees One

appropriate nos. of Thousand Six

24 MCBs.(The DBs should 1.00 Ea. 1,680.64

be used of same company Sixty Four

of MCB to be used) Paise Only

(B) three phase incoming

and single phase

horizontal type outgoing

Per phase isolation type

(a) single door

Providing and erecting

Sheet Steel powder coated

distribution board

(VTPN) - flush / surface

mounted double door

(IP54) fitted with copper

insulated busbar, isolated Rupees Six

neutral bar, earth bar and Thousand Four

DIN rail, Conforms to IS

25 1.00 Ea. 6,497.33 Ninety Seven

8623-1 & 3, IEC 61439-1 and Thirty

& 3, suitable for 63/100 Three Paise

AMP TPN MCCB + Only

RCCB as incomer and

three phase outgoing as

per following .(The DBs

should be used of same

company of MCB to be

(B) 6 way outgoing

Providing and erecting

Approved make RCCBs

conforming to IS:

and having sensitivity of

30 mA and Short Circuit

withstand capacity of

KA and suitable for Rupees Two

operation on 3 phase and Thousand Four

26 neutral 415V,50Hz. 1.00 Ea. 2,496.72

having characteristic of Seventy Two

quick action & tripping Paise Only

with all advance feature &

do not incorporate any

electronic component for

following Max. rating

erected as directed.(ii) for

Providing and erecting

Approved make RCCBs

conforming to IS:

and having sensitivity of

30 mA and Short Circuit

withstand capacity of

KA and suitable for Rupees Four

operation on 3 phase and Thousand

neutral 415V,50Hz. Seven

27 having characteristic of 1.00 Ea. 4,745.99 Hundred Forty

quick action & tripping Five and

with all advance feature & Ninety Nine

do not incorporate any Paise Only

electronic component for

following Max. rating

erected as directed.

(iv) 100 Amps. FP (100

mA Sensitivity)

Supplying & erecting

earth pit of minimum bore

dia.150mm size approved

make Earthing Electrode

consisting Pipe-in-Pipe

Technology as per IS

3043-1987 made of

corrosion free hot dipped

G.I.Pipes having Outer

pipe dia of 50mm having

galvanising, Inner pipe

dia of 25 mm having 200-

250 Micron galvanising,

connection terminal dia of

12mm with constant

ohmic value surrounded

by highly conductive

compound with high

charge dissipation

suitable for following

type of applications with

chamber and heavy duty Rupees Four

cover. (A)(approved Thousand Five

make OEM has to submit Hundred

test certificate including Ninety One

value of earth resistance and Forty Six

of installation duly Paise Only

stamped and signed by

agency and officer

Incharge has to ensure the

value of earthing resistane

mentioned in test

Certificate) & having

back filling compound of

(B) Inner chemical (CCM

Compound)- Resistivity:-

0.2 ohm / meter testing as

per IEC 62561-2017,

Voltage drop:- < 1 volt at

no load & dry form,

Sulphar content:- <2%(C)

Back fill Compound :-

Earthing compound

should be capable to

retain moisture for long

time Necessary test report

must be submitted by

(a) For Electrical

Installation up to 440V in

normal soil. Length of

pipe - 1 Mtr. Back filling

compound - 1 Nos Bag of

Providing and erecting

XLPE (IS:7098)(I)-88 ISI

multistrand / Solid Rupees One

Aluminium conductor for

29 50.00 Mtr. 168.67 Eight and

1.1 KV. to be laid on wall Sixty Seven

with necessary clamps or Paise Only

in existing trench / pipe of

following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting

XLPE (IS:7098)(I)-88 ISI

armoured cable Rupees One

multistrand / Solid Hundred

Aluminium conductor for Eighty Four

1.1 KV. to be laid on wall and Eighty

with necessary clamps or Three Paise

in existing trench / pipe of Only

following size of cables

(A) 4 core 16 Sq. mm

Making trench in soft soil

of suitable width of 90 cm

deep for laying cable or Rupees Fifty

31 locating the fault all over 50.00 Mtr. 55.55

the run and back filling Only

the same and making the

surface as normal ground.

Supplying & erecting

Mixing Console having

channels, Audio mixer

with. Echo facility for live

performance, Auditorium

& stadiums, having

following features &

facilities. [[Approved by

Competent Authority i.e.

not Below the rank of

Executive Engineer ]

(a)input Channels :- Each

channel has separate

6.25mm size balanced

phone jack for mike &

line for balanced &

unbalanced signals. (b)

Individual gain control for

sating optimum level for

minimum noise. (c)

BASS, MID & TREBLE ‘

controls Separately for

each input channel. (d) Rupees

ECHO control for each Twenty Two

channel (e) PAN control Thousand

for echo channel for left Sixty Three

or right output (f) AUX and Forty Five

Control : To control , level Paise Only

of the channe+B57 in

final mix to AUX sound

output (g) Channel

ON/OFF switch (h)

ECHO Section :- ECHO,

reverb & Chorus effect

can be added to all input

channel by different

setting of Delay, Reverb

& Level control. (i) Tape

section (j) Aux. send &

return For sending Pre-

feeder output of channel

for monitoring or adding a

special effect unit. (k)

Mono / Stereo output

controls (L) Master

faders to control over left

& right output (m) Head

phone output for

monitoring purpose.

Technical specification

(a) Power Requirement -

24 Volts (b) MIC Output

Impedance/gain -2 K

Ohms/ 62 dB (c)Line

Output Balance/42 dB —-

20 K ohms (d) Impedance

/ Gain :- 10Kohms

unbalance / 42 dB

(e)frequency Response -

30 Hz- 20 KHz L / R Line

Output ( + 0, -1 dB )

(f)Equalization Bass/ - + /

- 12 dB at 100Hz Mid /

Treble 2 KHz / 10 KHz

(g) Outputs, Line Output

Line Output Low : - 10 dB

/ -2 dBM Line Output

High : 0 dBM / +17 dBM

ratio Line Output Level :

The Console shall be

mounted on standard

Rack, The channel of

following numbers.

(A) 14 Channel Audio

Mixer with ECHO

Supplying microphones

stands with sturdy

mechanism, treble free

movement & positioning

of microphones, free from

rust with superior quality Rupees Four

of chrome plating with Hundred Forty

33 following size. [Approved 8.00 Ea. 445.41 Five and Forty

by Competent Authority One Paise

i.e. not Below the rank of Only

Executive Engineer ]

(c)Fixed height 91 cms. &

extendable up to 62 cms.

with round base of dia.

Supplying , installing &

testing approved make

Microphone for Speech,

Music, & Close to lip

singing with inbuilt

protection against breath

& wind noise with

capability to capture

sound from long distance Rupees Two

& wide area with Thousand Six

frequency response 50 - Hundred Fifty

16000 Hz, having Four and

sensitivity 1.8mv / Pa & Twenty Eight

impedance 430 ohms(Lo - Paise Only

Z) supplied with quick

detachable holder, 6 Mtr

long. Twin core cable &

pin XLR connector.

Competent Authority i.e.

not Below the rank of

Executive Engineer ]

Supplying & testing

wireless microphone

system for 92.5 MHz FM

operation With effective

range 200 feet with Rupees One

microphone having Thousand

facility for frequency Eight Hundred

adjustment & receiver Eighty Four

with LED indicator and Sixty Six

Telescopic antenna with Paise Only

battery cells.[[Approved

by Competent Authority

i.e. not Below the rank of

Executive Engineer ]

SITC of Power amplifier,

High-efficiency

professional Class-D

power amplifier, Rupees Thirty

minimum 480 W Five Thousand

continuous at 100 V line

36 1.00 Ea. 35,635.83 Thirty Five

for distributed PA / and Eighty

auditorium loudspeakers, Three Paise

operating on 230 V, 50 Hz Only

AC. Unit shall provide

balanced line-level input

with input gain control,

100 V (and 70 V / low-Z

where available) outputs,

clip/signal/power status

indication, and

protections for overload,

short circuit, DC at

output, over-temperature

and mains surge.

Amplifier shall be 19-inch

rack-mountable with

adequate cooling and

shall comply with

relevant safety and EMC

standards, approved by

Competent Authority not

below the rank of

Executive Engineer.

SITC of Cabinet

loudspeaker, 30W, black

High-fidelity music and

speech reproduction

Selectable 8 ohm, 70 V Rupees

and 100 V inputs Thirteen

Compact yet robust ABS Thousand

enclosure Supplied with Three Hundred

adjustable mounting Ninety Nine

bracket Complies with and Sixty

international installation Seven Paise

and safety regulations Only

[Approved by Competent

Authority i.e. not Below

the rank of Executive

Multimedia projector

(standard throw, LCD

technology) with native

resolution 1920×1080

(Full HD), minimum

brightness 4500 lumens

and contrast ratio

2,50,000:1, laser light Rupees One

source with minimum life Lakh Sixty

20,000 hours in normal Thousand

mode, standard throw Only

ratio 0.91–2.5 with

optical zoom, manual

keystone correction,

inbuilt 16 W speaker,

multiple input/output

ports including 2×HDMI,

RGB in/out, audio in/out,

video in, USB type A and

B, Wi-Fi connectivity,

wireless screen sharing

and LAN port, suitable

for 210–240 V, 50 Hz

supply with maximum

power consumption

W, noise level not

exceeding 37 dB in

normal mode, BIS

registered under CRS of

MeitY, with minimum

3-year on-site warranty

for projector and 3 years

or 12,000 hours for light

source, and the rate shall

be inclusive of supplying,

fixing/installation,

testing, commissioning,

making the system

operational and providing

necessary on-site training

to the end-user staff in

operation and basic

troubleshooting of the

projector, complete as

SITC of universal

Projector mounting kit,

with necessary grouting, Rupees Six

fasteners etc. with Thousand

adjustable height and

39 1.00 Ea. 6,848.81 Forty Eight

suitable for all types of and Eighty

projectors. [Approved by One Paise

Competent Authority i.e. Only

not Below the rank of

Executive Engineer ]

Supply, providing,

installation, testing &

commissioning of

automatic motorized

projector screen,

inches diagonal (16:9

aspect ratio), ceiling or

wall mount type(as per

site conditions), with

high-gain matte white

fiberglass fabric

(minimum gain 1.0–1.2)

for front projection, black

masked borders on all

sides for enhanced image

contrast, black backing to

prevent light penetration,

and aluminum powder-

coated casing with

concealed-type tubular

motor drive (low noise

<40 dB) operated through Rupees Eleven

40 wired switch and IR/RF 1.00 Ea. 11,830.00

remote control. Screen Thirty Only

shall ensure perfectly flat

viewing surface using

tensioned mechanism, be

suitable for HD/UHD

projection, operate on

V AC, include limit

switches, smooth

up/down operation, safety

thermal protection for the

motor, and provision for

integration with AV

control system; complete

accessories, hardware,

drawings/NBC/R&B

SOR, performance

verification, minimum 2-

year warranty & user

training as directed by

Engineer-in-Charge.

Supply, Installation

Testing & Rupees One

Commissioning 15 Mtr. Thousand

HDMI Interface Cable as Seven

41 per the detailed 1.00 Ea. 1,777.60 Hundred

Specifications supports Seventy Seven

transmission of 4K and Sixty

Signals as per the detailed Paise Only

Providing and erecting

Inverter based approved

make split air-

conditioning unit

consisting of condensing

unit with variable speed

fan motor, inverter type

hermetically sealed rotary

compressor with

accessories etc. duly

connected separately Rupees

erected evaporating unit Seventy

and blower motor with its Thousand One

42 accessories by means of 8.00 Ea. 70,142.48 Hundred Forty

extra supplied proper Two and Forty

insulated copper Eight Paise

tubing,drain PVC pipes Only

suitable for ( cost includes

Eco Friendly green gas

charging and 15A plug

top & Remote Control &

MS Stand) with necessary

core cutting. (2)For

(KWH/KWH)(4.0 to

4.49)(C) for 1.7 to 2 ton

Supplying and erecting

insulated pair of soft

copper tubing open or Rupees One

concealed including Thousand One

43 power and control 60.00 Mtr. 1,158.47

cable,necessary PVC Forty Seven

drain pipes for Split AC Paise Only

machine up to 4 TR

Supplying and installing

MS angle , powder coated

/ Painted standard type of

wall/floor stand mount for

outdoor unit of split AC of Rupees One

following capacity, Thousand

44 erected with necessary 8.00 Ea. 1,318.05

hardware materials as Five Paise

thick M.S angle suitable

for upto 2 TR. Capacity of

Supplying and erecting

approved make Thousand Five

surge/spike suppressor Hundred

45 having 3 out lets of 1.8 1.00 Ea. 1,531.16

AMP each complete and Sixteen

erected. Paise Only

Supplying and erecting

approved make Single

phase power conditioners

suitable for input voltage

180V / 280V, output

voltage 220V (+ / - 10%)

AC 50 ‘Hz with electronic Rupees Three

relays & component of

46 1.00 Ea. 3,232.00 Hundred

housed in sheet metal Thirty Two

cabinet ‘with epoxy Only

powder coated, with high

- low cutoff, time delay,

voltmeter, selector

switch, 5/15 A universal

socket with range off

Fabricated steel

equipment rack / cabinet

for auditorium sound

system, floor-standing,

minimum internal usable

height 24U, suitable for Rupees

mounting Sixteen

mixer-amplifier, power Thousand Five

amplifier, music source, Hundred Only

UPS and accessories,

made from minimum 16G

CRCA sheet with

ventilated front door, rear

access door, side

ventilation louvers, cable

entry at rear/bottom,

provision for earthing,

powder-coated finish,

complete with necessary

angle supports, hardware,

and base frame, approved

by Competent Authority

not below the rank of

Executive Engineer.

Dismentalling doors,

windowas, ventilators

etc.(wood or steel)

shutters including Rupees One

chowkhats, architraves, Hundred

48 Holdfasts and other 26.00 Nos 182.94

attachments etc. complete Four Paise

and stacking the materials Only

with all lead and lift. 1)

Not exceeding 3 smt. in

Removing and scraping

of old deteriorated

plaster of any thickness

fromm wall / R.C.C Rupees

member including Eighteen and

stacking of serviceable Ninety Four

material and disposal Paise Only

of nserviceable from site

of work with all lead and

Dismentaling tiled of

stone floors laid in mortar

including stacking of Rupees Forty

50 serviceable materilas and 241.00 Smt 46.77

disposal of unserviceable Paise Only

materials with all lead and

Providing 15mm.thick

cement plaster in single

coat on brick/ concrete Rupees One

wall for interior Hundred

51 plastering upto floor two 583.00 Smt 187.71

level and finished even One Paise

and smooth in: I) cement Only

moratr 1:3 (1cement :

Applying two coats of

putty and two coats of

primer of approved

brand and manufacture

on new wall surface to Rupees Forty

52 give an even shade 583.00 Smt 40.59 and Fifty Nine

including thoroughly Paise Only

brushing the surface free

from mortar dropping and

other foreign matter and

sand papered smooth.

Providing and laying

cement concrete flooring

1:2:4 (1- cement : 2- Rupees Three

coarse sand : 4- graded Hundred

53 stone aggregate 20mm 241.00 Smt 330.88 Thirty and

nominal size) laid in one Eighty Eight

layer and finished with a Paise Only

floating coat of neat

cement. (B) 50mm thick.

Providing and laying

polished Kota stone slab

flooring over 20mm

(Average) thick base of

cement mortar 1:6 (1-

cement : 6-coarse sand) or Rupees Nine

L.M. 1.1.5 (1-ime putty Hundred

54 :1.5 - coarse sand) laid 259.00 Smt 976.72

over and jointed with grey Two Paise

cement slurry mixed with Only

pigment to match the

shade of slab including

rubbing and polishing etc.

complete. (A) 25mm

Roller blind fabric

should be made up of

30-35percentage

Fiberglass, 65-

70percentage Vinyl on

Fiberglass, it should have

specific low emissivity

treatment and Lead free

with Greenguard Gold

certification. Fabric

approved by Melanoma

International Foundation

(MIF), it should cut

approximately and

antimicrobial properties

ASTM G21, AATCC30

GREENGUARD Gold

and Bacteria Standard

ASTM 6329; includes

Microban antimicrobial Rupees Two

additives. It should Thousand

have 3percentage Nine Hundred

openness, fabric Only

thickness should be

0.50-0.55 mm, fabric

weight should be

grams per square meter,

The fabirc should be

Flame retardant as per

California U.S. Title

(small scale), NFPA

TM#1 (small scale),

NFPA 101 (Class A

Rating), IBC Section

803.1.1 (Class A Rating),

BS 5867 Part 2 Type B

Performance, NFPA

TM#2 (large scale),

CAN/ULC-S 109 (large

and small scale),

CAN/CGSB2-4.162-M80

with 10 years of warranty

against any distortion in

fabric due to any reason.

Roller blind tube should

be made of Aluminium

with a diameter of 38mm,

bottom rod should be

powder coated and should

come with the end cap to

support the fabric,

aluminium brackets and

a ball chain or any other

arrangement as per

specification all

complete as per direction

of Engineer in charge.

Filling in foundation and

plinth with murrum or Rupees Two

selected soil in layers of Hundred

56 20cm. thickness including 84.00 CUM 289.06 Eighty Nine

watering, ramming and and Six Paise

consolidating etc. Only

Providing and laying

cement concrete 1:2:4 (1- Rupees Three

Cement : 2- Coarse sand : Thousand Four

4- graded stone Hundred

57 aggregates 20 mm 39.00 CUM 3,481.28 Eighty One

nominal size) and curing and Twenty

complete excluding cost Eight Paise

of formwork in (A) Only

Foundation and Plinth

Brick work using

common burnt clay

building bricks having Rupees Four

crushing strength not less

58 than 35 kg./Sq.Cm. in 17.00 CUM 4,284.12

foundation and plinth in and Twelve

Cement Mortar 1:6 (1- Paise Only

Cement : 6 -fine sand)(A)

Pro. And fixing single

layer water proof gypsum

board 12.5 mm thick

sections using water proof

board of size 1220 mm x

suspended by GI

suspender channel of size

25 mm x3 mm with

intermediate channel og

size 18 mm x40 mm

mm at 1220 mm center to

center ceiling section of Rupees Six

size 40 mm x 35 mm x

59 272.00 Sqm 606.95 and Ninety

0.55 mm at 457 mm c/c Five Paise

and perimeter channel A Only

of size 20 mm x 27 mm x

30 mm x 0.5 mm at edges

& drops incl.paper tap

sand sofit cleat, anchor

fastener,scoch bolt

connecting cleat joining

compound top coat on

ceiling incl.making

ecy.opening for light

fitting,diffuser etc. comp.

as per detail drawing as

Providing and fixing PVC

vinyl wooden flooring

(plank type) of approved

wood finish colour having

thickness with wear layer

not less than 0.3 mm, anti-

skid surface suitable for

stage / auditorium use. Rupees Five

60 Flooring shall be fixed 252.00 Sqm 560.00 Hundred Sixty

over prepared and Only

levelled surface using

approved adhesive,

including cutting, fitting,

edge trimming and

finishing complete. Rate

shall include material,

adhesive, labour, wastage

and installation complete.

Demolition of Brick work

and stone masonry Rupees Five

including stacking of Hundred

61 serviceable materials and 50.00 CUM 536.09 Thirty Six and

disposal of unserviceable Nine Paise

materials with all lead and Only

lift — In Cement Mortar

Providing and supplying

‘Optra Acoustical Wall

Paneling’ with square

edges made of fibre glass

substrate 25 mm thick and

wrapped on the front side

with an acoustically

transparent fabric

classified for Fire

Reaction Class A as per

ASTM E-84, with colour

options – Husk, Copper,

Sangria, Sesame, Coffee,

Charcoal, Titanium,

Flame, Peanut & Shell, as

per the choice of the

Architect, of size 600 ×

1200 mm, providing a

absorption level of 0.85 Rupees Three

NRC, to be affixed to wall Thousand Five

62 using wall panel and 168.00 Sqm 3,575.40

construction adhesives as and Forty

per the instructions laid Paise Only

INSTALLATION: 4 Nos.

wall panel impalers shall

be fixed to the wall

surface using self-tapping

screws. Silica-based

construction adhesive

shall be dabbed on to the

projecting elements

(spikes) of the impalers.

Optra wall panels shall be

pierced through the spikes

of the impalers ensuring

the line and level of the

panels are maintained.

Installation shall be

carried out by a trained

installation team as per

recommended procedure,

complete as directed by

Engineer-in-Charge.

Total In Words: Rupees Forty Nine Lakh Nineteen Thousand Only

Total Amount for Colleges At One location (in INR Excluding GST): 49,19,000.00/-

Total Amount for Colleges At One location (in INR Excluding GST): 49,19,000.00/-

willing to carry % above/below

Percent (Should be written in figures and words) of the estimated rate

mentioned above

for each item. Amount of my /our tender works out as under.

Estimated Estimated amount put to

amount put to tender

Deduct………% Add………% Above

In words In words