TN_No_80_Infrastructure Development of Kajiamati High School Building in Udalguri District under One Time Special Grant for the financial year 2019-20

Amount

Administrative & Teacher Common Room RCC Ground Floor 1.1. Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completetion of work, breaking clods in return filling, dressing, watering and remming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 m below the existing ground level. (a) In ordinary soil.

4.1.1. Providing soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on edge Soling

(a) Brick on flat Soling

2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing stepts, walls brick works etc. as directed and specified including dewatering if………. (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. code for RCC work/R.B. walling including straightening, cleaning cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (No extra measurement for lap, hook, chair, anchpr etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (a) Super Ductile (SD) TMT reinforcement bars.

3.2.1. Providing from work of 12mm thick plywood board so as to give a rough finish including centering shuttering, strutting and propping etc. 3.2.1.1. Column, pillars posts & struct of square/rectangular/Polygonal in plain or any shape like Tee/L etc.

3.2.1.2. Sides and soffits of beam, beam haunchings, cantilever girders bressumers, lintels and horizantal ties. (a) For depth not execeding 1.00m

3.2.1.3. Flat surface such as soffits of suspended floor roof landing chajja etc. (a) Floor etc. upto 200mm in thickness

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (from work and reinforcement will be measured and paid separately) (i) Using Mixing Machine. (A) Foundarion, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser. (b) M20 grade concrete or prop. 1:1.5:3

(b) In super structure from plinthlevel upto 1st floor level. (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, belcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (exceptspiral staircase and landing) including preparing the top surface and

4.1.4. Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (i) In sub-structure upto plinth level including dewatering if necessary (b) In prop. 1:4

2.1.3. Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in prop admixture in proportion as recommended by the manufacture including curing etc. complete as directed.

4.1.8. 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4 (1 cement : 4 sand)

1.3. Earth/sand filling in plinth layers not more than 150mm thick including necessary carriage, wetering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c ) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

11.2.3. Providing fitting and fixing coloured anodised aluminium frame glazed doors with anodised aluminium frame made of 100mm X 45mm X 2.5m etc. Complete

11.1.1. Providing, fitting and fixing anodised aluminium windows and ventilators of standared section of approved section of approved brand (Hindalco/NALCO/Balco/Jindal etc. Complete (b) 3 Trah slidling window (iii) 6mm thick coloured glass

6.2.2. 15mm thick cement plaster in single coat on single on single or half brick wall for interior plastering upto 1st floor level including arise, internal roundred angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (a) On rough side (b) In cement mortar 1:4

(B) On fair side (b) In cement mortar 1:4

5.1.4. 65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 (1 cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15mm thick wearing layer in cement concrete in prop. 1:1:2… complete as directed.

13.3.4. Providing two coats of Birla White wall care putty weter Risistant white cement base etc. Complete. (i) Thickness 1.50mm thick.

13.2.3. (a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

13.4.1. Providing (two coats) with acnlyic emulsion part approved brand and manufacture Assian paint etc. Complete.

26.1.3. Pre Construction anti termit treatment by applying ….etc. Complete (O) With aquaous emulsion paint.

26.1.4. Pre Construction anti termit treatment by applying in the surface of wall, coloum etc. Complete (O) With aqushing having…

19.3. Providing plinth protection with brick flat laid in cement mortar 1:4 and finished 15mm thick cement plaster in prop. 1:2 with a flating coat of neat cement finish.

19.5. Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C. (1:3:6) base over one brick flat soling including 15mm thick cement plasterin in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work..... (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with inital depth of 100mm.

5.7.2.1. Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floor, skirtings, risers and treads of step over 15mm thick base of cement mortar in prop. 1:3 etc. (I) Normal range (Somany/orient/Nitco varmora/Jhonson make. (a) of size 600mm X 600mm and above

(B) On Wall Tile: Providing vitrified polished wall tiles of approved brand etc. complete of size 150mm X 605mm and above.

Renovation/Repairing of Existing Class Room Building Const. of Cultural Stage. 23.12. Dismentaling all type of corrugated tropozoidal sheet roofing including riding etc. Complete valy and gutter….skirting etc. complete as directed by the deptt.

39.9. Dismantaling wood work in frame truss purlins and rafter including staking etc.complete as directed by the department.

23.15. Demolising C.C. floor of various thickness including top layer and base course and disposal etc. complete

23.18 Dismentaling and removing the existing door and windows frame (Chowkath) both wooden and steel of different size. (i) Area of door/window upto 3.00m2

9.1.2. Providing wood work in frame chowkath of doors/windows clerestory windows and other similar work etc. Complete (b) With 2nd Class timer.

9.2.1. Providing undressed wood work in roof truss etc complete. (b) With Hollock/Sundi/Sam

8.1.35. Providing pre painted galvalume sheet roofing (P.P. GL) at all levels including fitting and fixing self tapping screws complete (Roof trusses, purlin Tata Blue scope/Dyna roof/Wonder Roof or equivale (iv) 0.55mm thick

18.1.36. Providing pre Painted Galvalume Sheet (PPGL) accessories (Ridges/Valley/Gutter/Flashing) at all level including fitting and fixing self drilling, self tapping screws complete (iv) 0.80mm

7.10.1. Providing and fixing in position suspended false ceiling using E-Grid (Exposed ceiling suspension 2430 system) of grid size 600mm X 600mm /1200mm X 600mm with main runner 38 X 24mm cross tee 29mm X 24mm & well angle 24mm X 24mm etc. (B) (i) Using 6mm thick F.C. Board

9.18.1. Providing fitting and fixing factory made santro flash door shutter etc. Complete. (B) 35mm thick.

9.9.7. Providing fitting and fixing fully glassed window with such bars including oxidised M.S. Bult hings etc. Complete. (C ) With 1st class local wood (ii) 35mm thick

9.9.9. Providing fitting and fixing fully glassed clerestory window and from hight including fitting etc. Complete 2 M.S. pivol hings etc. complete etc. (B) With Gamari/Hollock/Bonsum wood (ii) 35mm thick

9.4.1. Providing barge board of size 200mm X 25mm with 1st class wood Hollock/Bonsum timber including fitting and fixing with necessary etc….complete

5.1.3. 40mm thick cement concrete floor consistiong of 25mm under layers of cement concrete in prop. 1:3:6 and 15mm thick wearing layers etc. Complete as directed.

5.7.3.1. Providing Plished SUN ROCh-HI CTS/MULTIWYN, tiles of approved quality and size etc. Etc. Complete (ii) Old castle (455 X 4550mm

5.7.2.2. Providing polished VITRIFIED wall tiles of approved quality size shape and thickness not less than 8mm on wall etc. Complete as….. (C ) Delux range (Sommy/Orient/Nitco/Jhonson (i) Of size 150mm X 605mm and above

6.2.1. 10mm thick cement plaster in single coat on fair side etc. Complete. (b) In cement mortar 1:4

10.1. Providing fitting and fixing M.S. road ….16mm dia M.S. rod

13.2.3. (a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

13.6.3. Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface throughly cleanning oil, grease, dirt and other foreign matter, sand papering and knotting. (b) With ready mixed paint wood primer white.

13.6.5. Painting two coat (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint, Berger, ICI Paint/J&N Paint/Nerolac) to give and even shade including cleaning the surface of all dirt and dust, other foreign matter, sand papering and topping (i) Surface over 100mm in width or girth (a) General Purpose (Asian Paint/Bergar pain/ICI paint)

15.2.1. Supllying fitting and fixing avodised alluminium fittings of approved make resonably smooth, free from sharp edges and corners, flaws and other defects.....etc. complete as directed. (a) Sliding door bolt (i) 300mm X 16mm

(b) Tower bolt (ii) 250mm X 12mm

(C ) Door handle (ii) 100mm

€ Bult hing (ii) 75mm X 45mm X 3.20mm

16.1. Providing, fitting and fixing clear sheet glass beded in putty and …….. (i) Area of glass panes not exceding 0.15 m2

Cost. Of Cultural Stage 1.1. Earthwork in excavation for foundation trenches of walls retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil.

1.3. Earth/sand filling in plinth layers not more than 150mm thick including necessary carriage, wetering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c ) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

STEEL WORK 18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. code for RCC work/R.B. Walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and plaing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are including in the rate) (Upto 1st floor level) (a) From Primary Producer:TATA/SAIL/Esser Steel/Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars

18.3.1. Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. (a) TATA make circular Hollow section - CHS of Grade YST- 310 conforming to I.S. Specification: 1161-1998.

CEMENT CONCRETE WORK 2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary shall be measured and paid separately) (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume.

2.1.3. Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in prop admixture in proportion as recommended by the manufacture including curing etc. complete as directed.

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (from work and reinforcement will be measured and paid separately) (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser (a) M15 grade concrete or Prop. 1:2:4

(b) In super structure from plinthlevel upto 1st floor level. (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, belcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (exceptspiral staircase and landing) including preparing the top surface and finishing of nosing. (N) Without using admixture, plasticiser (a) M15 grade concrete or Prop. 1:2:4

SHUTTERING & FORMWORK 3.1.1. Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1. Foundation, footing, bases of columns, pile cap, raft and mass concrete work etc. (ii) Using 25mm thick plank

3.1.1.2. Sides of tie beam, grade beams etc. at or below ground level. (ii) Using 25mm thick plank

3.1.1.3. Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face. (ii) Using 25mm thick plank

3.1.1.4. Side and soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal tiles. (a) For depth not exceeding 1.0M (ii) using 25mm thick plank.

BRICK WORK 4.1.1. Providing soling in foundation and under floor with stone/best quality picked Jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (a0 Brick on flat soling.

4.1.4. Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (i) In sub-structure upto plinth level including dewatering if necessary (b) In prop. 1:4

4.1.8. 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall. (a) In cement mortar in propprtion 1:4

ANTI-TERMITE TREATMENT 26.1.2. Pre construction anti-termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5(five) litres per square meter square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated with chemical (Supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. (a) With aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

FLOORING 5.1.4. 65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 (1 cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15mm thick wearing layer in cement concrete in prop. 1:1:2 ( 1cement : 1 coarse sand : 2 coarse aggregate of size 10mm down.)

6.2.2. 15mm thick cement plaster in single coat on single on single or half brick wall for interior plastering upto 1st floor level including arise, internal roundred angles, not exceeding 80mm girth and finished even and smooth including curing complete. (B) On fair side (b) In cement mortar 1:4

6.2.3. 20mm thick cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On rough side (backing coat 15mm and finishing coat 5mm thick) (b) In cement mortar 1:4

PLINTH PROTECTION 19.2. Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

8.1.33. Providing Pre Painted Galvanized Iron sheet roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately). TATA Blue scope/Dyna roof/Durakolor/wonder Roof or equivalent as directed by the Department. (iv) 0.60 mm thick.

8.1.34. Providing galvd iron ridging of TATA SHAKTEE/SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed.x (iii) 0.50mm thick.

PAINTING 13.4.1. Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic paint/Berger paint/ICI paint/J&N paint/Nerolac)

Boundary Wall 1.1. Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic………..as directed and specified. A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil.

4.1.1. Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid ….. dewatering, complete. (a) Brick on flat Soling

2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing stepts, ….measured and paid separately). (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. code for R.C.C. work/R.B. Walling including etc. complete. b) Other ISI approved reinforcement bar (SRNB/SAI/BISCON) 8mm dia

(C ) ISI approved Mild Steel reinforcement bar (M.S. Bar) (a) 6mm dia stirrup

2.1.3. Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size.

3.2.1. Providing form work of 12mm thick plywood board so as to give a rough finish including centering shuttering, strutting and propping etc. 3.2.1.1. Column, pillars posts & struct of square/rectangular/ Polygonal in plain ar any shape like Tee/ L etc

3.2.1.2. : Sides and soffits of beam, beam haunchings, cantilever girders bressumers, lintels and horizantal ties. a) For depth not execeding 1.00 M

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinfor cement for reinforced cement concrete (I) Using Mixture Machine. (A) Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser. (b) M15 grade concrete or prop. 1:2:4.

(b) In super structure from plinthlevel upto Ist floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, belcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (exceptspiral staircase and landing) including preparing the top surface and finishing of (N) Without using admixture, plasticiser. (b) M15 grade concrete or prop. 1:2:4.

4.1.4. Brick work in cement mortar with Ist class brick including racking outjoints and curing complete as directed. (i) In sub-structure upto plinth level including dewatering if necessary b) In prop. 1:4

4.1.8. 112mm thick Ist class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above P.L. uo to Ist floor level etc. (a) In cement mortar in proportion 1:4 (1 cement : 4 sand)

6.2.2. 15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto Ist floor level including arise, internal roundred angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

13.2.3. (a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new walls surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered ma

Iron Gate Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic………..as directed and specified. A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil.

2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing stepts, ….measured and paid separately) (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume.

18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. code for R.C.C. work/R.B. Walling including etc. complete. b) Other ISI approved reinforcement bar (SRNB/SAI/BISCON)

3.2.1. Providing form work of 12mm thick plywood board so as to give a rough finish including centering shuttering, strutting and propping etc. 3.2.1.1. Column, pillars posts & struct of square/rectangular/ Polygonal in plain ar any shape like Tee/ L etc

3.2.1.2. : Sides and soffits of beam, beam haunchings, cantilever girders bressumers, lintels and horizantal ties. a) For depth not execeding 1.00 M

3.2.1.3. : Flat surface such as soffits of suspended floors roof landing slab Chajja etc. a) Floor etc. upto 200mm in thickness

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinfor cement for reinforced cement ...... (I) Using Mixture Machine (A) Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser (b) M`15 grade concrete or prop. 1:2:4

(b) In super structure from plinthlevel upto Ist floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, belcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (exceptspiral staircase and landing) including preparing the top surface and finishing of (N) Without using admixture, plasticiser (b) M15 grade concrete or prop. 1:2:4

6.2.2. 15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto Ist floor level including arise, internal roundred angles, not exceeding 80mm girth and finished even and smooth including … as directed.

5.7.2.1. Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floor, skirtings, risers and treads of step over 15mm thick base of cement mortar in prop. 1:3 etc. (I) Normal range (Somany/orient/Nitco varmora/Jhonson make. (a) of size 600mm x 600mm and above

5.11.1. Providing Antiskit tiles of approved quality etc. etc. complete Siko/pedestail … with white cement ii) Executive range a) Delux range

4.1.1. Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid ….. dewatering, complete. (a) Brick on flat soling

2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing stepts, ….measured and paid separately) (b) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

30.7. Providing and laying of inter locaking concrete block pavement (ICBP) with cement concrete etc. etc. complete.

17.11. Supplying fitting and fixing double leaf heavy duty iron gate etc. complete.

Electrical Work- Teacher Common Room 1.1. Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C insulated singal core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR kabel or Equivalent make as approved by the Deptt. with flat 19 mm ISI market casing ‘n’ capping (AKG / precision/presto plast/polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type swith/bell push (Anchor penta/Gold medal / Kolor kany. Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet kany. Kom / Havells or equivalent make as approved by the Deptt.) etc. Complete as directed and specified by the Deptt. 1.1.1. 1.1.1 Short point up to 3.00 metre. Length

1.1.2. 1.1.2 Medium point up to 6.00 metre. Length.

1.1.3. Long point up to 10.00 metre. Length.

1.2. Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolutic cover conductor for voltage grade up to 1100 volts (Finolex /RR kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marketd casing ‘n’ capping (AKG / precision/ presto plast/ polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta/ Gold medal/Kolor kany. Kom/Havells or equivalent make as approved by the Deptt.) G.I/MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. Cable to third pin of the plug socket etc. as required complete, when placed elsehere. 1.2.3. Long point up to 10.00 metre. Length.

1.3. Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible brigh annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing ‘n’ capping (AKG/ precision presto plast/polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type swith (Anchor penta/ Gold medel/ kolor kany. Kom/Havells or equivalent make as approved by the Deptt.) GI/MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. 1.3.2 Medium point up to 6.00 metre. Length.

1.8 :- Wiring for drawing Sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR kabel or equivalent make as approved by the Deptt.) in surface flat ISI market casing ‘n’ capping (AKG / precision/ presto plast/polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.1 with 2 x 2.5sq.mm + earth continuity with 1x1.5 sq. mm. In flat 19 mm ISI market casing ‘n’ capping system.

1.8.2 with 2x4 sq. mm. + earth continuity with 1x2.5 sq. mm. Cable in flat 19 mm ISI market casing ‘n’ capping system.

1.8.3 with 2 x 6 sq. mm + earth continuity with 1 x 4 sq. mm. Cable in flat 25mm ISI market casing ‘n’ capping system.

1.11 :- iring for 5 pin 6 amp plug with 1.5 sq mm P.V.C insulated single core unsheathes industrial (Multistrand) cble FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta / Gold medal / Kolor kany. Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch......................of light and fan.

11.12 :- Supplying and fixing of polished brass bracket of 18 S.W.G, 25 cm long cast back plate and brass

11.26 :- Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/ decorative bracked/bulk head fitting/ pendent holder ec. As specified and directed by the deptt.

15.4 :- Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 ( Schneider neo break, C & S , Havells, Standard, or equivalent as approved by the Deptt.) 15.4.1.1 4 way SPN double door

16.1 :- Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.1 B Series ( Schneider MG, legrand, Hanger, Crabtree Xpro 16.1.1.1. 6 to 32 A

22.7 :- Supply, installation & testing of G.i earth station with perforated 40 mm dia and 4.50 Metre long heavy duty G.I pipe with necessary 40 mm dia. G.I Fittings such as Soket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

22.12 :- Extra for using salt 5 K and Charcoal 64 K in pipe Earth Station pit to provide low impedance group in location of high soil resistivity as and when required and specified by the deptt.

22.17 : Supplying & laying of 8 SWG G.I earth drawn through 15 mm dia. Medium quality G.I. pipe from earth electrode (below G.I) to electrical switch grears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

27.1 :- Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with the Deptt. As required complete and as directed by the Department [Without regulator] 27.1.3 premium model 1400 mm Sweep (ORIENT PSPO make) / Premium model 1400 mm Sweep SS-390 Deco. (Havells make)

27.6 :- Supplying fitting and fixing of ceiling fan regulator including connection etc. Complete as required. 27.6.2 Electronic Type type

ECBC.3.28 :- Supplying, Installation, testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. Directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. ECBC. 3.28.1

HIGH SCHOOL BUILDING 1.1 :- Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C insulated singal core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR kabel or Equivalent make as approved by the Deptt. with flat 19 mm ISI market casing ‘n’ capping (AKG / precision/presto plast/polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type swith/bell push (Anchor penta/Gold medal / Kolor kany. Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet kany. Kom / Havells or equivalent make as approved by the Deptt.) etc. Complete as directed and specified by the Deptt. 1.1.1. Short point up to 3.00 metre. Length

1.1.2. Medium point up to 6.00 metre. Length.

1.1.3 Long point up to 10.00 metre. length

1.8 :- Wiring for drawing Sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR kabel or equivalent make as approved by the Deptt.) in surface flat ISI market casing ‘n’ capping (AKG / precision/ presto plast/polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.1 with 2 x 2.5sq.mm + earth continuity with 1x1.5 sq. mm. In flat 19 mm ISI market casing ‘n’ capping system.

1.8.2 with 2x4 sq. mm. + earth continuity with 1x2.5 sq. mm. Cable in flat 19 mm ISI market casing ‘n’ capping system.

1.8.3 with 2 x 6 sq. mm + earth continuity with 1 x 4 sq. mm. Cable in flat 25mm ISI market casing ‘n’ capping system.

11.12 :- Supplying and fixing of polished brass bracket of 18 S.W.G, 25 cm long cast back plate and brass

11.26 :- Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/ decorative bracked/bulk head fitting/ pendent holder ec. As specified and directed by the deptt.

15.4 :- Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 ( Schneider neo break, C & S , Havells, Standard, or equivalent as approved by the Deptt.) 15.4.1.1 4 way SPN double door

16.1 :- Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.1 B Series ( Schneider MG, legrand, Hanger, Crabtree Xpro 16.1.1.1 6 to 32A

22.7 :- Supply, installation & testing of G.i earth station with perforated 40 mm dia and 4.50 Metre long heavy duty G.I pipe with necessary 40 mm dia. G.I Fittings such as Soket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

22.12 :- Extra for using salt 5 K and Charcoal 64 K in pipe Earth Station pit to provide low impedance group in location of high soil resistivity as and when required and specified by the deptt.

22.17 : Supplying & laying of 8 SWG G.I earth drawn through 15 mm dia. Medium quality G.I. pipe from earth electrode (below G.I) to electrical switch grears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

27.1 :- Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department [Without regulator]x 27.1.3 premium model 1400 mm Sweep. (ORIENT PSPO make) / premium model 1400 mm sweep SS-390 Deco. (Havells make)

27.6 :- Supplying fitting and fixing of ceiling fan regulator including connection etc. Complete as required. 27.6. Electronic Type type

ECBC.3.28 :- Supplying, Installation, testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. Directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. ECBC. 3.28.1

Installation of 5 KVA Diesel Generator 1.8 :- Wiring for drawing Sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR kabel or equivalent make as approved by the Deptt.) in surface flat ISI market casing ‘n’ capping (AKG / precision/ presto plast/polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.4 with 2 x 10 sq. mm. + earth continuity with 1 x 6 sq. mm. Cable in flat 25 mm ISI market casing ‘n’ capping system.

16.44 Supplying with fitting and fixing four pole 415V front handle operated on load charge over swithch (IP-20 protection) powder painted sheet steel enclosure fitted on angle iron grame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.44.1 C&S Havells, Indo Asian, HPL, GECO make) 16.44.1.1 63 A

22.7 :- Supply, installation & testing of G.i earth station with perforated 40 mm dia and 4.50 Metre long heavy duty G.I pipe with necessary 40 mm dia. G.I Fittings such as Soket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

22.12 :- Extra for using salt 5 K and Charcoal 64 K in pipe Earth Station pit to provide low impedance group in location of high soil resistivity as and when required and specified by the deptt.

22.17 : Supplying & laying of 8 SWG G.I earth drawn through 15 mm dia. Medium quality G.I. pipe from earth electrode (below G.I) to electrical switch grears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

41.1 Supplying including installation, testing and commissioning of Air/water cooled Diesel generator set coupled to suitable alternator of 220/415 V, AC, 1/3- Phase 0.8 P.f. mounted on a 1) M.S Fabricated base grame.,2) M.S. fuel tank of required capacity.,3) Residual silencer.,4 standard control panel.5) suitable batteries with lead.5) First fill of lube oil., 6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer (RANGE FROM 5 KVA TO 625 KVA) Kirloskar green/bliss, Leyland, Volvo penta, perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer alternator. 41.1.1 KVA-PHASE-Approx size- Approx Wt - COOLING 41.1.1.1. 5-1- 1600 x 820 x 1530 – 650 Kg – A/C

SWRANG ENTERPRISE

JYOTI KUMAR GOYARI