Repairing and Renovation of Surgical ICU and CCM including upgradation of toilets at CHD

Amount

Item Description/ Heading

Dismantling tile work (thickness of tiles 10 mm to 25 mm) in floors and roofs laid in cement mortar including stacking of serviceable materials and disposal of unserviceable materials within 50 mtrs. Lead.

P/F 1st quality glazed digitaly wall tiles min(450X300 mm) in all Colours shades of approved brand (Kajaria, Johnsons or equivalent)and as per the instruction of EIC.

Providing and laying ceramic glazed floor tiles 300x300 mm(thickness to be specified by the manufacturer) of first Quality conforming to IS: 15622 of approved make in colours, such as white, Ivory, grey, fume,red brown laid on 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) including pointing the joints with white cement and pigment of matching shade complete.

Dismantling old plaster or skirting , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtrs. Lead.

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand )

18 mm cement plaster in two course, under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and finished with a top layer of 6 mm thick cement plaster 1:6 (1 cement : 6 coarse sand )

Painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.

Providing/Fixing 19 mm thick ply board with 1 mm thick sunmica one side including required adhessive material etc.

Providing sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

Providing and fixing 25 mm nominal bore outer dia Chlorinated Polyvinyle Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In-charge in internal work-exposed on wall.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.,20 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.,15 mm nominal outer dia .Pipes.

Providing and fixing 25 mm nominal bore G.I. Union in G.I. pipe line, cutting and threading the pipe and making long screws etc. complete (New work).

Providing and fixing 20 mm nominal bore G.I. Union in G.I. pipe line, cutting and threading the pipe and making long screws etc. complete (New work).

Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (Screwed end)

P/F cp brass health fuccets with flange with all complete job hindware / jaquar or equivalent

Providing and fixing white vitreous china pedestal type water closet (European type WC pan ) with ISI marked white solid plastic seat and lid, 10 litre low level white PVC flusing cistern including flush pipe with mannualy controled device (handle lever) conforming to IS :7231 with all fittings and fixtures complete including cutting and making good the walls and floors where ever required.

Providing and fixing white vitreous china flat back wash basin of size 550x400 mm with a single 15 mm CP brass pillar tap, 32 mmCP brass waste of standard pattern including painting of fittings of brackets, cutting and making good the walls where ever required

P/F cp bib cock with all complete job of make Jaguar/ hindware or equivalent as per instruction of EIC.

Providing and fixing white vitreous china Orissa pattern Indian type W.C. squatting pan of size 580x440 mm.

Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore

Providing and fixing 15 mm nominal bore Brass stop cock of approved quality

Providing and fixing white vitreous china laboratory sink of size 600x450x200mm with C.I. brackets, C.P.brass chain with rubber plug, 40 mm CP brass waste and 40 mm C. P. brass trap with necessary C.P.brass unions complete including painting of fittings of brackets, cutting and making good the walls where ever required.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm

P/F PVC P trap 110X110 mm

Dismantling W.C pan/Comod and p trap disposal up to 50 mtr lead.

Dismentaling of flushing cistern of any size including staking of using materials near the site and disposal of unserviceable materials within 50 mt. lead

Providing and fixing 10 litres capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonary and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Providing and fixing on wall face unplasticised PVC moulded 87.5 degree bend of 110 mm diameter for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 110 mm diameter single socketed ,conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 75 mm diameter single socketed ,conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipe of 75 mm diameter by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing with float glass panes of 4.0 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing aluminium handle of size 125 mm ISI marked anodised: ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium tower bolt of size 200 x 10 mm ISI marked anodised: ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Disposal of building rubbish/ malba/ similar unservicable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge beyond 50 mtr. Initial lead, for all leads including all lifts involved.

Dismantling doors, windows and clerestory window (Steel or wood) shutters of area 3 sq. Mtr. And below including chowkhats, architrave, holdfasts etc. complete and staking within 50 meter lead .

Providing and fixing aluminium sliding door bolt of size 300 x 16 mm ISI marked anodised: ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing M.S. grills fixed to steel section by welding of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing stainless steel (grade 304) wire gauze with 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. flat 15x3 mm and nuts & bolts complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and wahers complete.

Providing and fixing 600x120 x5 mm glass self with edges round of supported on anodised aluminium anle frame with CP brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.

Providing and fixing IS: 3564 marked Aluminium die body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.

Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) :50 mm

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) complete

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in- charge

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Demolishing cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manualy/by mechanical means including disposal of material within 50meters lead as per direction of Engineer-in- charge

Providing and fixing 18 mm thick gang saw cut mirror polished (premoulded and polished) machine cut Granite of any colour and shade (Area of slab over 0.50 sqm.) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing ofTwo way bib cock CP Brass with all complete job,make jaquar, Hindware or equivalent, with wall flange cat No. f730004

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with:8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Rate Analysis for Providing /Fixing curtain Rod stainless steel pipe 25 mm and Wall Support Curtain Holder Bracket ( Curtain Holder Bracket will be paid seperatly )

supplying of Wall Support Curtain Holder Bracket

P/F Window curtain cloths including stitching and materials included etc.

p/f 6 mm thick plyboard with 1 mm thick surmica one side including required adhessive material etc

p/f 0.8 mm thick surmica(Linear) one side including required adhessive material etc

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge .With stainless steel cover plate minimum 1.25 mm thickness

Ditempering one or more coats with oil bound washable distemper of approved brand and manufacture to give an even shade over old work.

Providing and fixing of wall mixer of CP Brass with all complete job,make jaquar, Hindware or equivalent, with provision for Overhead Shower with 115 mm long bend pipe Cat No. F730020

Providing and fixing Head Shower, Ultra thin SS Rain shower , Single flow 200mm Cat No. f160103 CP Brass with all complete job,make jaquar, Hindware or equivalent

Providing and fixing Towel Bar CP Brass with all complete job,make jaquar, Hindware or equivalent Cat No. f890011

Providing and fixing Wash basin with Pedestal all complete Size 55x4079 with all complete job,make jaquar, Hindware or equivalent Cat No. 10100 Pad 11003 (Ariel)

Providing and fixing of sanitary items cp brass with all complete job Jquar, Hindware or equivalent Pillar cock Long Neck Cat No. f730002

Total impact of GST for the purpose of CTC

M AND T GROUP