Repair to sub main wiring in hangar light and other tech bldgs at AF Stn Chandigarh

Amount

Taking down defective main switches , electric meters, distribution board iron clad or sheet metal of any size and capacity including wooden board & MCBs etc, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully submain wiring including service connection complete with PVC conduit & GI wire any size and making good distrubed surfaces,complete all as specified and directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc, complete all as specified and directed by Engineer-in-Charge.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistranded) PVC insulated ISI marked unsheathed cable 1100 volts grade in and including concealed/surface , non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories including PVC insulated ISI marked unsheathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly concealed in wall/ceiling, MS box 1.6 mm thick with hylum sheet 3 mm thick (approved colour) suitable size switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch

One three pin 5 amp socket outlet multipurpose on independent board

One three pin 5 Amp switch socket cum on same board

One light point controlled by 2-two way switch

M&L for Point wiring with 2.5 sq mm copper conductor FRLS (multistranded) PVC insulated ISI marked unsheathed cable 1100 volts grade in and including concealed/surface , non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & accessories including PVC insulated ISI marked unsheathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly concealed in wall/ceiling, MS box 1.6 mm thick with hylum sheet 3 mm thick (approved colour) suitable size switches, sockets, fan regulator etc complete as specified and directed :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

S&F Modular switch 1 way 6 A, 1 module all as specified and directed. Make- Havells/Legrand/L&T

S & F modular socket outlet, 2/3 pins combined, 6 Amps, 2 module, 230 volts all as specified and directed. Make : Havells/Legrand/L&T

S&F Modular switch 1 way 16 A, 1 module all as specified and directed. Make : Havells/Legrand/L&T

S & F white cover plate with frame, 3 module all as specified and directed. Make : Havells/Legrand/L&T

S & F white cover plate with frame, 4 module all as specified and directed. Make : Havells/Legrand/L&T

S & F white cover plate with frame, 6 module all as specified and directed. Make : Havells/Legrand/L&T

S & F white cover plate with frame, 8 module all as specified and directed. Make : Havells/Legrand/L&T

Supply and fixing switch piano type, flush type, single pole, one way, 5 Amps, all as specified. Make : Havells/Legrand/L&T

Supply and fixing socket outlet flush type 2/3 pins 5 Amps multipurpose, all as specified and directed. Make : Havells/Legrand/L&T

Supply and fixing switch piano type, flush type, single pole, one way, 16 Amps, all as specified and directed Make : Havells/Legrand/L&T

Supply and fix, socket outlet, flush type, multi purpose 3 pin, 6 Amps & 16 Amps, 230 volts, all as specified and directed Make : Havells/Legrand/L&T

Supply and fix, switch bell push flush type 05 Amps (230 volts) , all as specified and directed. Make : Havells/Legrand/L&T

Supply and fix, modular switch 2way 6 Amps (230 volts) 1 module , all as specified and directed. Make : Havells/Legrand/L&T

Supply and fix,ceiling fan regulators step type electronic for 1200/1400 mm sweep ceiling fan, flush type, complete all as specified and directed by Engineer-in-Charge. Make : Havells/Legrand/L&T

Disconnecting and taking down the complete ceiling fan 1200/1400mm sweep with down rod from ceiling hook at any locations and carrying out rewinding with super enameled copper wire of appropriate gauge inc replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing/oiling of bush and the bearings, replacement of missing / worn out nuts, bolts & washers etc. and testing after reassembling and refixing back on the same location after painting with synthetic eneamel paint and connecting complete all as specified and directed by Engr- in -Charge. Make Wire: Devi Dayal / HTP Ltd Bombay / Victor Varnish: MODI /CHINAR/ LOTUS

Supply and fixing in replacement of Ball bearing No 6202 /6203 suitable for 1200/1400 mm sweep ceiling fan of any model complete all as specified and directed by the Engineer -in – Charge. Make: NBC /SKF / TATA.

Supply and fixing in replacement of gun metal bush for any sweep/size/ model of ceiling fan complete all as specified and directed by the Engineer – in – Charge.

Supply and fixing in replacement of down rod for any sweep/size/ model of ceiling fan complete up to 2 feet all as specified and directed by the Engineer – in – Charge.

Supply and fixing in replacement of canopy for any sweep/size/ model of ceiling fan complete all as specified and directed by the Engineer – in – Charge.

Disconnecting and taking down the complete exhaust fan of 300/450 mm sweep from the existing location and carry out rewinding by dismantling from frame with and including super enameled copper wire of suitable gauge of any make including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing, lubricating, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing, complete all as specified and directed by Engineer – in - Charge for the following size: Make : Wire : Devi Dayal / HTP Ltd Bombay / Victor Varnish: MODI/CHINAR/ LOTUS

Supply and fix in replacment of louvers suitable for exhaust fan of size 450 MM sweep, complete all as specified and directed by Engineer – in – Charge.

Supply and fix in replacement of blade assembly suitable for exhaust fan of size 450 MM sweep, complete all as specified and directed by Engineer – in – Charge.

S&F wiring for circuit/Sub main wiring along with earth wire with two single core 2x 4 Sqmm (nominal area) PVC insulated and unsheathed cables with stranded copper FRLS conductor in and including PVC concealed conduit 20 mm dia or higher ISI marked including one run of continuous PVC insulated FRLS multi stranded copper cable of size 1x2.5 Sqmm earth wire for earth continuity conductor complete all as specified. Make . Polycab/Finolex/Havells/Gloster Note : Two runs of 4 sqmm x 2 core x one run of 25Sqmm with PVC conduit will be measured as one unit.

S&F wiring for circuit/Sub main wiring along with earth wire with two single core 2x 6 Sqmm (nominal area) PVC insulated and unsheathed cables with stranded copper FRLS conductor in and including PVC concealed conduit 20 mm dia or higher ISI marked including one run of continuous PVC insulated FRLS copper multi stranded copper cable of size 1x4 Sqmm earth wire for earth continuity conductor complete all as specified. Make . Polycab/Finolex/Havells/Gloster Note : Two runs of 6 sqmm x 2 core x one run of 4Sqmm with PVC conduit will be measured as one unit.

Material & Labour for Sub Main Wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in and including PVC concealed conduit 32 mm with and including 1x6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note : 02 run of single core cable and 1 run of earth wire will measured as one unit. Make: Finolex/ Havells /Standard.

S&F sheet metal enclosure for Incoming MCCB and outgoing MCBs factory made double door, V TPN 415 Volts 6 ways with 200 Amp bus bar with IP43 protection complete in all aspects all as specified and directed .

S&F sheet metal enclosure for Incoming VTPN 125 Amp distribution board MCCB and outgoing MCBs factory made double door, 8 ways with 200 Amp bus bar with IP43 protection complete in all aspects all as specified and directed . Make : Legrand/HPL/Havells/Hager

S&F sheet metal enclosure for Incoming VTPN 125 Amp distribution board MCCB and outgoing MCBs factory made double door, 12 ways with 200 Amp bus bar with IP43 protection complete in all aspects all as specified and directed .Make : Legrand/HPL/Havells/Hager

S & F sheet metal enclosure single pole and neutral with a two pin & earth plug and socket etc complete with on Double pole & earth MCB 32 Amps, 'B' curve, 240 volts 10 KA all as specified and directed . Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of MCB SP 240 Volts 6 Amps to 32 Amps complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of MCB SP 240 Volts 63 Amps 'B' curve type complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Refixing of servicable MCBs of any type retruved from item No 1, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCCB 63 amps AC 415 V conforms to IS/IEC:60497-2 Thermal and fixed magnetic setting Ics=100% of Icu complete all as specified . Make : Legrand/HPL/Havells

S&F in replacement of MCCB 100amps AC 415 V conforms to IS/IEC:60497-2 Thermal and fixed magnetic setting Ics=100% of Icu complete all as specified . Make : Legrand/HPL/Havells/Hager

S&F in repairs MCCB 4 pole 125 Amps, 25 KA, 415 volts grade, complete. Make : Legrand/HPL/Havells/Hager

S&F in replacement of MCCB 160 amps 36 KA AC 415 V conforms to IS/IEC:60497-2 Thermal and fixed magnetic setting Ics=100% of Icu complete all as specified . Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of DB sheet metal enclosure double door for MCBs, company made, SPN 240 Volts 12 ways with IP 42 protection complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of DB sheet metal enclosure double door for MCBs, company made, SPN 240 Volts 8 ways with IP 42 protection complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of DB sheet metal enclosure double door for MCBs, company made, SPN 240 Volts 4 ways with IP 42 protection complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of MCB TPN 415 Volts 63 Amps, complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

Supply and fixing, in replacement of MCB SPN 240 Volts 40 Amps complete all as specified and directed by Engineer-in Charge. Make : Legrand/HPL/Havells/Hager

S&F in replacement of LED street light luminaries 90 watt, comprising an extruded aluminium housing with pre-wired gear tray with LEDs and driver, heat resistant flat glass suitably gasketed for IP 66 protection, complete with all accessories prewired fixed on pole/wall bracket in and incl 50 mm dia GI pipe light grade 1.2 mtr long , FI clamps 40 x5 mm thick with nut bolt and washers and connections c omplete all as directed by Engineer-in-Charge. Make: Crompton Greaves Cat No. LSTO-90-CDL or equivalent in Bajaj/Phillips/Wipro

S&F in replacement of LED environmental friendly new generation, aesthetically designed , ultra modern recess mounting luminarie with high brightness SMD LEDs as light source suitable for Armstrong/Grid ceiling 42 W complete with all accessories . Make Havells Model No - PLUTONEO2x2PLR42WLED840S/Bajaj/Phillips/Wipro/CG

S&F in repair decorative LED light fitting four feet long energy efficient complete with LED lamp 18/20 watt 230 volts, box type CRCA sheet housing and connecting up with twin twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Havell, Cat Part No LUMLINEBS20WLED830SPCWH/euivalent in CG/Wipro

S & F ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals, all as specified and directed.

Material & labour, earthing complete with galvanize steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level earth plate surrounded by 15 cm thick and packed alternate layers of charcoal dust and common salt, earth lead GI wire 4mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No, 5 of MES Sch Part-1 (2009), complete all as specified.

S&F Endura high Brite plus energy friendly & robust open type vertical Highway medium bay LED IP 54 luminarie with high power COB LED 150 W light with LED lamp complete all as specified and directed . Make- Havells Model No - ENDURAHIBRITEPLUSHBP150WLED765P60DTOLENS (HSN Code 9405)/CG/Philips

Taking down existing highbay luminaries 250 Watt at a height of 35 meters approx above ground level and refixing the same after replacement of the foliowing parts:-

Supply only Metal Halide single ended clear tubular lamp (MH Set) 250 W , 6000K complete. Make- Havells/CG/Philips

Supply only Ignitors for HPSV/MH lamp of existing make.

Supply only of open ended ballast for HD lamps 250 watt.

Supply and fixing in replacement of energy saving, environment friendly & roboust Highbay/medium bay LED IP-65 luminarie 200 Watt at aheight of 35 meters with high efficiency complete with all accessories. Make - Havells Model No - BAYBRITESAUCERHBP200WLED757NBTOLTG/CG/Philips

S&F in replacement of U shape CFL rod 36 W 4 pin suitable for 2'x2' concealed light fitting. Make- CG/Philips/Wipro/Havells

S&F in replacement of CFL rod 14 Wx 2 suitable for 2'x2' concealed light fitting. Make- CG/Philips/Wipro/Havells

S&F in replacement of electronics ballast 36 W x 2 suitable for 2'x2' concealed light fitting. Make- CG/Philips/Wipro/Havells

S&F in replacement of electronics ballast 18 W suitable for 2'x2' concealed light fitting. Make- CG/Philips/Wipro/Havells

S&F in replacement of electronics ballast 14 W suitable for 2'x2' concealed light fitting. Make- CG/Philips/Wipro/Havells

S&F in replacement of down lighter 5 watt 6500 K suitable for POP ceiling . Make - Havells cat part No ORBITTDLR5WLED840S/CG/Philips

Supply and fixing of PVC insulated sheathed flexible cable, served with copper conductor of working voltage 1100 Volt grade, cross sectional area 0.75 Sq. mm x 3 core, fixed to ceiling rose to any type fittings of size with saddles including making connections as in repairs, complete all as directed

S&F in replacement of FRLS PVC insulated copper conductor single core cable with cable thimble/lugs made of copper in surface/recessed as required for LT panel repair with necessary fixtures as required at site all as specified & directed and of following sizes :

Supply only Electrical insuation tape of size 19mmx33mm all as specified and directed.

Note:- Amount of credit of Rs. 131443.00 for retrieved materials is mentioned in Schedule of Credit Page No 108 of tender documents in pdf form which will be deducted offline while acceptance of tender.

sscontractor engineers

M/s Matloob Ahmed

HARISH SALES CORPORATION