PROVISION OF PRESSURE FILTER PLANT AT KINHAI PUMP HOUSE AND SPECIAL REPAIR TO SECURITY LIGHT AT AYAPPA HILL UNDER GE DEHUROAD.

Amount

Supply and Installation commissioning and testing of pressure filter with including catalytic media,with back washing facility including RCC foundation of capacity (10000Galn per Hours)/45 m3/hr and Velocity 20-25 m3/hr/m2 Filter 1600 mm dia filter with 1875 HOS , Shell 5 MM & Dish 6MM thick .with media 3120 kgs along with MSEP Battery Valve and all inter connected pipe line as per manufacturer design all as directed. Make ION Exchange or any approve make of CESC

Supply and Installation commissioning and testing of ACF,including catalytic media, back washing facility including RCC foundation of capacity (10000Galn per Hours)/45 m3/hr & Velocity 20-25 m3/hr/m2 Filter 1600 mm dia filter with 1875 HOS , Shell 5 MM & Dish 6MM thick .with media 3120 kgs along with MSEP Battery Valveand all inter connected pipe line as per manufacturer design all as directed. Make ION Exchangeor any approve make of CESC

Supply and Installation commissioning and testing of Centrifugal Pump with motor suitable capacity for water pumping pressure filter with discharge 45m3/hr and head 30 Mt complet all as directed. Make -Kirloskar / Wilo /Jhonson

Supply ,Install Testing &Commissioning of self supporting totally enclosed LT Indoor type Panel suitable for 440 Volt 3 phase 4 wire system made out of 3.00 mm thick CRCA sheet and built upon rigid frame work having front and rear hinged doors , earthing strip point and, , bottom detachable gland plate complete with suitable size of Zinc/Chromium plated and nuts, bolts and washers etc. The panel shall be synthetic enameled painted . The Panel shall be embedded with 50 x 6 mm MS Angle Iron frame and 30 cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 complete all as specified and comprising of the following. (a) Cupper bas bar 200 amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 160 Amps 4 Pole =01 No For incomming (c) MCCB 80 Amps 3 Pole =02 No For Outgoing Pump ( d) Star delta Starter for 60 HP Motor=02 Nos (e) Indicator Lanp=03 Nos (f ) Volt Meter=01 No (g) Amp Meter=02 No

Supply and laying underground cable XLPE insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade, fixed on pole, wall and trenches of sizes 3.5 core 50 sqmm all as directed.

Supply and fixing Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694 of size 10sq mm all as directed.

Supply and laying GI pipe medium grade 80 mm dia including all fittings complet all as directed.

Supply and fixing of sluice valve 80mm dia type PN-1.6 double Flanged cast iron type with brass spindle and iron wheel iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete all as directed . Make: Kirloskar/ BIR/ UPADHYA/Balaji

Supply and fixing of Valve, reflux, with by-pass Arrangement, 80 mm dia double Flanged cast iron type with brass spindle and iron wheel iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete all asdirected . Make: Kirloskar/ BIR/ UPADHYA/Balaji

Supply and fixing of Foot Valve conforming to IS 4038, 80 mm dia cast iron type including nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete all as directed. Make: Kirloskar/ BIR/ UPADHYA/Balaji

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4 mm did as earthing lead by means of bolts, nuts and washers, check nuts made out of galvanized iron or steel all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified directed.

Excavation in trenches not exc 1.5 mtr wide and exc 1.5 mtr in depth and getting out in in soft /loose soil for foundation of poles

Returning filling in , excluding spreading, levelling, watering and well ramming in layers not exc 25cms each

Removing surplus soil to a distance not exc 50mtr away and depositing at a point where directed not exceeding 1.5 mtr above the staring point

Supply, spreading in trenches fine dry river sand for cable protection and removing down getting by hand all as specified and directed by EIC.

Supply and laying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping of poles etc including necessary form work complete.

M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Dismantling and taking down un serviceable solar light fitting/LED light fittings of any type and deposited to MES store yard

Supply and fixing integrated solar all in one strret light with lithium ferro phosphate battery solar panel charger buitl into the lluminair. Pressure die cast aluminium for sturdness and long life. Specially designed pole mounting bracket allows differrent tilt angle lateral and pole top mounting .Sun stay has highest ever system efficacy of more than 175 lum/w. of grid type as per philips model no BARP710LED20 CWMR S1 12V LFP AIO Solar Equipment IN with sensor.Make : Philips or equivalent Make Havells,Crompton

Supply and fixing solar flood light DIY kit with lithium ferro phosphate battery built in the luminarie remote controller and installation accessories included IP 65 ABS plastic construction for sturdiness and long life. As per philips model no BVC080 LED15/765 all as directed.Make : Philips or equivalent Make Havells,Crompton

Supply and fixing hot dip galvanised Octagonal pole 7 mtr long bottom A/F 135 mm top A/F 70mm thickness 3mm built in box mounting base plate 250x250x12 mm all as directed.

Yashwanti electricals

M/s. JBSR ENTERPRISES.