Retender for Supply and Fixing of Furniture Work for SFS, SCSDF, NDPS at NFSU Gandhinagar

Requirement for SFS

P & F post laminated Work Top with mounter overall size 1200/1500/1800 /2100 X 750 - 1050 mm as per requirements, made from 34MM HDHMR(16+16) laminated board both side 1mm laminated. All edges are covered by 2 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. MS Brackets are provided to mount with Partition or Gable end. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work is done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Gable End 800-700X710X34 mm (LEG) : P & F Gable end to support top having overall size 800-700/710/34mm. 34mm pre laminated/post laminated Plywood Panels of 16+16 mm BWR calibrated ply confirming to IS 303 covered with lamination in both sides, glued with PUR glue. All edges are covered with 2mm thick PVC edge bands.

Pre fabricated KD Panels: Providing and Fixing Pre fabricated Plywood KD panels : Pre Laminated/Post laminated Plywood, 16mm thick BWR calibrated ply confirming to IS 303 covered with lamination, on both sides, . All the edges are covered with matching 2/0.8mm thick PVC edge bands glued with hot melt glue on CNC controlled through feed edge banding machine with pre milling operation. KD fitting: Entire unit is assembled through 8mmX45mm concealed bolt with 15 m eccentric cranks, 8mm wooden dowels, etc. complete drilling and boring work is done on CNC Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Providing storage rack ready to assemble type, self-standing, over hanging or partition mounted storage system having 450 mm. Ready to assemble type, Self-standing storage unit having depth 450mm as per requirements with following details: Carcass and shelves: Made from 18mm pre laminated/post laminated panels of 16 mm BWR calibrated ply confirming to IS 303 covered with 0.8 mm laminate on both side glued with PUR glue, 0.8mm thick PVC edge bands glued with hot melt Glues on auto edge banding machine. All panels should be interchangeable to facilitate assembly at site. The shelves are connected with body through adjustable shelf supports. Back Panel: 3mm high pressure compact sheet both side laminated hold in slit formed in the body. Shutters: Made from Flat laminated Plywood confirming to IS 303 of 16mm BWR calibrated ply confirming to IS 303 covered with laminate on both side glued with PUR glue, with 2 mm thick PVC edge bands glued with hot melts Glues on auto edge banding machine with pre milling attachment, Hinged with concealed auto clip-on system "Blum", "Grass" or "Hettich" make OR top sliding mechanism with 25 x 25 mm aluminium extruded channels and Top mounted laterally guided ball bearing blocks. KD fittings: 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. complete. Drilling and boring work is done on Multi drill machine in KD-32 system. All mounting holes are notched in all axis simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm.

Sofa 3 Seater : Providing and fixing in position of the Three seater sofas as per the drawing. It shall be made up of synthetic leather with the rubber wood frame. Seat foam shall be urethane foam with silicon fill and form shall have density of 31-33 kg/cubic cm and webbing material shall be s-spring. It shall have dimensions 1830W X 750D X 820H in mm complete as per design, drawing and as per specifications / additional specifications & as directed by Engineer-in-Charge.

Providing and fixing Roller blinds as per approved make as per suggested shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 5% Fabric value : 465 gsm ,Thickness : 0.65 mm Fabric to be as per approved sample. All the work complete as per the detailed drawing , mock-up sample and instruction of Architect/EIC.All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mock-up sample approved by the Architect/ EIC.

Providing & Fixing 2 mm thick Poly Vinayle Clorine Flooring (PVC) with preparation of base, fixing with hitex,rdex endura or equivelant including rolling with 5 kg roller and making the surface bubble free all complete (make:- wonder floor, solarbrite, hego)

Requirement for SCSDF

P & F Cabin Doors Providing and fixing Cabin Doors sturdy and matching with partitions having overall size 800X2400mm, including hardware like hinges, handles and dead lock, etc.(Without Door closer) DOOR FRAME :Aluminium extruded section having overall size 80X35X1.25 mm in curved contour with overlap pocket to mount door. It should have pocket to encapsulate wooden board for mounting Hinges and Lock. Door : Laminated (both side) Flush door with 30 mm core thickness covered with 3mm MDF board shall be provided including 4 no heavy duty hinges and dead lock. Edges of the door should be covered with 2mm PVC edge bands glued on door with hot melt glue on automatic edge banding machine after preparing the edge on milling machine.

P & F post laminated Work Top with mounter overall size 1200/1500/1800 /2100 X 750 - 1050 mm as per requirements, made from 34MM HDHMR(16+16) laminated board both side 1mm laminated. All edges are covered by 2 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. MS Brackets are provided to mount with Partition or Gable end. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work is done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

P & F post laminated Work Top with mounter overall size 1200/1500/1800 /2100 X 750 - 1050 mm as per requirements, made from 34MM HDHMR(16+16) laminated board both side 1mm laminated. All edges are covered by 2 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. MS Brackets are provided to mount with Partition or Gable end. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work is done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Gable End 800-700X710X34 mm (LEG) : P & F Gable end to support top having overall size 800-700/710/34mm. 34mm pre laminated/post laminated Plywood Panels of 16+16 mm BWR calibrated ply confirming to IS 303 covered with lamination in both sides, glued with PUR glue. All edges are covered with 2mm thick PVC edge bands.

Pre fabricated KD Panels: Providing and Fixing Pre fabricated Plywood KD panels : Pre Laminated/Post laminated Plywood, 16mm thick BWR calibrated ply confirming to IS 303 covered with lamination, on both sides, . All the edges are covered with matching 2/0.8mm thick PVC edge bands glued with hot melt glue on CNC controlled through feed edge banding machine with pre milling operation. KD fitting: Entire unit is assembled through 8mmX45mm concealed bolt with 15 m eccentric cranks, 8mm wooden dowels, etc. complete drilling and boring work is done on CNC Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Providing storage rack ready to assemble type, self-standing, over hanging or partition mounted storage system having 450 mm. Ready to assemble type, Self-standing storage unit having depth 450mm as per requirements with following details: Carcass and shelves: Made from 18mm pre laminated/post laminated panels of 16 mm BWR calibrated ply confirming to IS 303 covered with 0.8 mm laminate on both side glued with PUR glue, 0.8mm thick PVC edge bands glued with hot melt Glues on auto edge banding machine. All panels should be interchangeable to facilitate assembly at site. The shelves are connected with body through adjustable shelf supports. Back Panel: 3mm high pressure compact sheet both side laminated hold in slit formed in the body. Shutters: Made from Flat laminated Plywood confirming to IS 303 of 16mm BWR calibrated ply confirming to IS 303 covered with laminate on both side glued with PUR glue, with 2 mm thick PVC edge bands glued with hot melts Glues on auto edge banding machine with pre milling attachment, Hinged with concealed auto clip-on system "Blum", "Grass" or "Hettich" make OR top sliding mechanism with 25 x 25 mm aluminium extruded channels and Top mounted laterally guided ball bearing blocks. KD fittings: 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. complete. Drilling and boring work is done on Multi drill machine in KD-32 system. All mounting holes are notched in all axis simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm.

Providing storage rack ready to assemble type, self-standing, over hanging or partition mounted storage system having 450 mm. Ready to assemble type, Self-standing storage unit having depth 450mm as per requirements with following details: Carcass and shelves: Made from 18mm pre laminated/post laminated panels of 16 mm BWR calibrated ply confirming to IS 303 covered with 0.8 mm laminate on both side glued with PUR glue, 0.8mm thick PVC edge bands glued with hot melt Glues on auto edge banding machine. All panels should be interchangeable to facilitate assembly at site. The shelves are connected with body through adjustable shelf supports. Back Panel: 3mm high pressure compact sheet both side laminated hold in slit formed in the body. Shutters: Made from Flat laminated Plywood confirming to IS 303 of 16mm BWR calibrated ply confirming to IS 303 covered with laminate on both side glued with PUR glue, with 2 mm thick PVC edge bands glued with hot melts Glues on auto edge banding machine with pre milling attachment, Hinged with concealed auto clip-on system "Blum", "Grass" or "Hettich" make OR top sliding mechanism with 25 x 25 mm aluminium extruded channels and Top mounted laterally guided ball bearing blocks. KD fittings: 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. complete. Drilling and boring work is done on Multi drill machine in KD-32 system. All mounting holes are notched in all axis simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm.

Mesh Back medium chair - Supply and installation of approved make size W 660 X D 600 X 950 H with fabric upholstery on Pu Foam Seat, Adjustable head rest and arm rest, adjustable lumbar support, self adjustable mechanism with 4 locking position with nylon caster and star base, nylon star base for extra load carrying capacity, The chair include pneumatic seat height adjustment, tilt adjustment for back and also with two pair of caster, as per design given by the architect and approved by the engineer in charge.

Visitor chair : Upholstered shall with 50mm moulded PU foam as per the shape covered with tapestry cloth of basic rate Rs 250/00 per RMT. Bottom frame is made from 32/25mm dia MS ERW CRC tube with necessary stiffeners and powder coated in seven tank process.

Requirement for Case Receiving Room at NDPS

P & F Cabin Doors Providing and fixing Cabin Doors sturdy and matching with partitions having overall size 800X2400mm, including hardware like hinges, handles and dead lock, etc.(Without Door closer) DOOR FRAME :Aluminium extruded section having overall size 80X35X1.25 mm in curved contour with overlap pocket to mount door. It should have pocket to encapsulate wooden board for mounting Hinges and Lock. Door : Laminated (both side) Flush door with 30 mm core thickness covered with 3mm MDF board shall be provided including 4 no heavy duty hinges and dead lock. Edges of the door should be covered with 2mm PVC edge bands glued on door with hot melt glue on automatic edge banding machine after preparing the edge on milling machine. SIZE:- 0.9 X 2.4 X 2 = 4.32 SMT

P & F Wooden Jamb Made From 12mm ply in visible side and 18mm ply for inside framing with 1mm lamination glued with PUR adhesive. SIZE:- 2.8 X 6 = 16.8 MTR SIZE:- 0.95 X 3 = 2.85 MTR

Providing storage rack ready to assemble type, self-standing, over hanging or partition mounted storage system having 450 mm. Ready to assemble type, Self-standing storage unit having depth 450mm as per requirements with following details: Carcass and shelves: Made from 18mm pre laminated/post laminated panels of 16 mm BWR calibrated ply confirming to IS 303 covered with 0.8 mm laminate on both side glued with PUR glue, 0.8mm thick PVC edge bands glued with hot melt Glues on auto edge banding machine. All panels should be interchangeable to facilitate assembly at site. The shelves are connected with body through adjustable shelf supports. Back Panel: 3mm high pressure compact sheet both side laminated hold in slit formed in the body. Shutters: Made from Flat laminated Plywood confirming to IS 303 of 16mm BWR calibrated ply confirming to IS 303 covered with laminate on both side glued with PUR glue, with 2 mm thick PVC edge bands glued with hot melts Glues on auto edge banding machine with pre milling attachment, Hinged with concealed auto clip-on system "Blum", "Grass" or "Hettich" make OR top sliding mechanism with 25 x 25 mm aluminium extruded channels and Top mounted laterally guided ball bearing blocks. KD fittings: 8 mm x 45 mm oncealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. complete. Drilling and boring work is done on Multi drill machine in KD-32 system. All mounting holes are notched in all axis simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm. SIZE:- 0.8 X 2.4 X 1= 1.92 SMT