Re-Construction of Sri Swamy Vari Pushkarini belongs to SVVS Devasthanam, Kanipakam

Removing the existing cut stone flooring carefully without damage. The stone should be conveyed and stacked as specified by the department as directed during execution. The rate is including labour charges for removing the slab carefully without damage, loading lifting stacking at site etc., complete as directed during execution

Dismantling of Steel work in built up section in angles, flats up direction including all gusset plates , bolts & nuts cutting rivets, welding joints etc.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete (Brick masonry )

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete (reinforced cement concrete )

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete (unreinforced cement concrete more150mm thick )

Removing the existing granite stone steps, layer wise carefully without damage. The stone should be conveyed and stacked as specified by the department as directed during execution. The rate is including labour charges for removing the slab carefully without damage

Earth work excavation for foundations (Mechanical Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Plane Cement Concrete (1:11/2:3) using 20mm HBG M/C Metal including cost and conveyance of all materials, using hand mixing and labour charges etc., complete with hand mixing for plain works.

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and including Seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering :

b) For Pillar Up to Plinth

C) For Plinth Beam

d) For Pillars Above plinth

Providing High Yield Strength Deformed (HYSD) (Fe 415/500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site and excluding seigniorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(

Ornamental Brick Masonry in C.M(1:5) mix using II nd class bricks well burnt from any kiln, inclusive of brick bots, and madras terrace bricks, including cost & conveyance of all materials, labour charges, scaffolding charges, and curing etc., complete complying of standard specifications and as directed during execution of work for one Cu.m

First Ornamental Plastering in CM 1" to 1 1/4" thick base plastering in CM (1:3) 20mm thick and top plastering in CM(1:2) mix 12mm thick including cost and conveyance of all materials and labour charges etc complete

Supplying and fixing of copper stupi with stupi dandam including the cost and conveyance of all materials and labour charges etc complete

Manufacturing supplying and fixing of MS ornamental grills and compound wall gates by using MS tubes, angles and square rods as per approved designs and drawings including fixing in position, cost conveyance of all materials and labour charges for finished item of work.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.

Supply ing fixing of scaffolding during execution of work including cost and conveyance of all materials and labour charges etc complete

I) Upto 20'-0" Height

II) Above 20'-0" Height

Supply of Granite stone (Kuppam varity)including fine dressing and polishing to the shape and dimensions as per the approved drawing including cost and conveyance of all materials and labour charges etc., complete

COST OF STONE AT SITE

FOR NEERAJANA MANDAPAM

Cut stone flooring

COST OF ROUGH DRESSING

I) FOR NEERAJANA MANDAPAM

For Stone Pillars

Two Line Palmana Dressing for Hard granite Stone including cost and conveyance charges of all materials complete for finished item of work.

For Nerajana Mandapam

For Upapeeta padmam

Upapeeta Kantam

for Upapeeta Kapodakam

For Stone Pillars

For Pushpa Pothiakas

For Stone Beams

do Stone Kodangi

LABOUR CHARGES FOR JOINTING FOR HARD GRANITE STONE

Cut stone flooring

For Neerajana Mandapam (Qty As per item no. 19B)

COST OF TOOL MAKING MATERIAL FOR PALAMANA DRESSING

For Neerajana Mandapam (Qty As per item no. 19B)

Laying of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish.

Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position Labour Charges refixing for - 304 Grade frames

Core drilling machine / Drilling equipment Hire charges for Core cutting machine